Godox LEDP120C Bedienungsanleitung
LED Video Light
型号: LEDP120C
Instruction Manual | 说明手册
Chinese English Bilingual | 中英文双语
705-L12000-00
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423
邮箱/E-mail: [email protected]
http://www.godox.com
神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
Made In China
Foreword
For your safety
Thank you for purchasing this Godox product!
LEDP120C video light is excellent for macrophotography, wedding shooting, product
shooting, photojournalistic and video recording, etc. The lightweight and portable light
provides high brightness, convenient operation and accurate color temperature.
Features:
● High-quality LED bulbs
● Using lithium battery with great portability
● Soft and even illumination
● Included with a L-type bracket
● Adjustable light brightness and color temperature
● Fits almost any cameras and camcorders
Type
Changeable Version(Color Temperature 3300K~5600K)
Model
LEDP120C
Do not place in high temperature or high humidity conditions.
Do not handle with wet hands, immerse in water, or expose to rain.
Observe precautions when handling batteries:
● Do not put batteries into a fire or apply direct heat to it.
● Batteries are prone to leakage when fully discharged. To avoid damage to the
product, be sure to remove batteries out when the product will not be used for a
long time or when batteries run out of charge.
● Should liquid from batteries come into contact with skin or clothing, rinse
immediately with fresh water.
Body
Parts
116 LED Beads
L-type Bracket
ON/OFF
Power Switch
Battery Indicator
Button
Select Dial for
Light Brightness
Select Dial for
Color Temperature
Heat Dissipation Hole
Lithium Battery
Compartment
Battery Unlock Button
1/4″ Bracket Mounting Hole
Power Management
1. Power Supply
One power supply modes is available:
● Using lithium battery: This light uses SONY NP-F970 model lithium battery.
Note: When using lithium battery, press the Battery Indicator Button and the battery
level will be displayed.
2. Installing Lithium Battery
● Turn the Power Switch off.
● Target the socket of the lithium battery
towards the "+" "-" contacts of the Battery
Compartment. Push the battery in until it
locks.
● Power the light on.
● After using the light, please power it off.
● When removing the battery, hold down
the Battery Unlock Button and push out
the battery in the opposite direction of pushing in.
Using the Video Light
1. On the Camera
● Install the L-type Bracket onto the 1/4″ Bracket
Mounting Hole and tighten the upper locking
ring of the L-type Bracket.
● Screw the lower locking ring of the L-type
Bracket to the highest point and insert the
Camera Hotshoe Connection horizontally into the
hotshoe of a camera or a camcorder. Tighten the
lower locking ring.
2. By the Handle
● Install the L-type Bracket onto the 1/4″ Bracket
Mounting Hole and tighten the upper locking ring
of the L-type Bracket.
3. On the Light Stand
● Install the light stand onto the 1/4″ Bracket
Mounting Hole
Note: If your camcorder has no hotshoe connection, it is advised to purchase a
camcorder connecting bracket in the market and install the video light through
its 1/4″ Bracket Mounting Hole.
Battery Indicator
Button
Operation
1. Before Usage
● Insert the lithium battery.
● Switch the power on, the video light giving out light.
2. Light Brightness/Color Temperature Adjustment
Adjusting Light Brightness
● Turn the Select Dial for Light Brightness to adjust the light brightness.
Color Temperature
3300K~5600K
Model
Changeable Version
(LEDP120C)
Light Brightness Range
10%~100%
Adjusting Color Temperature
● Turn the Select Dial for Color Temperature to adjust color temperature.
Color temperature range:
What’s in the Box of LEDP120C?
Included Item
LEDP120C Video Light
L-type Bracket
NO.
1
2
LEDP120C(3300K~5600K)
1 PC
1 PC
LEDP120C Video Light L-type Bracket
* Product design and specifications are subject to change without notice.
Technical Data
Video Light
Lithium Battery
Power
Color Temperature
Brightness(LUX)
Color Rendering Index
TLCI(Qa)
Light Brightness
Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight
Changeable Version
LEDP120C
7.4V Lithium Battery (NP-F970 model lithium battery)
(sold separately)
Max. 12W
5600K±300K
580 (0.5m/4500K)
630 (0.5m/3300K)
680 (0.5m/5600K)
>95
>95
10%~100%
116
-10~50°C
175mm*130mm*17mm (not with the L-type Bracket)
220g
Color Temperature Range
3300K~5600K
Model
Changeable Version
(LEDP120C)
Andere Handbücher für LEDP120C
1
Andere Godox Kamerazubehör Handbücher
Godox
Godox XT32 Bedienungsanleitung
Godox
Godox RING 48 Bedienungsanleitung
Godox
Godox FC-16 Bedienungsanleitung
Godox
Godox LED170II Bedienungsanleitung
Godox
Godox X2TC Bedienungsanleitung
Godox
Godox WITSTRO AD600BM Bedienungsanleitung
Godox
Godox SL100Bi Bedienungsanleitung
Godox
Godox SL Series Bedienungsanleitung
Godox
Godox LR150 Bedienungsanleitung
Godox
Godox X1 Bedienungsanleitung
Godox
Godox AD600 Witstro Bedienungsanleitung
Godox
Godox X1C Bedienungsanleitung
Godox
Godox X1N Bedienungsanleitung
Godox
Godox LED 36 Bedienungsanleitung
Godox
Godox X1N Bedienungsanleitung
Godox
Godox X1C Bedienungsanleitung
Godox
Godox AD100Pro Bedienungsanleitung
Godox
Godox SEII Bedienungsanleitung
Godox
Godox QE Series Bedienungsanleitung
Godox
Godox X1 Bedienungsanleitung
