Godox LC500 Bedienungsanleitung
Instruction Manual | 说明手册Chinese English Bilingual | 中英文双语
705-LC5000-00
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423
邮箱/E-mail: [email protected]
http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
Made In China
LED Light Stick
LED棒灯
LC500
Foreword
Warning
Thank you for purchasing this Godox Product!
This LED Light Stick LC500 is a continuous light with double color temperature, high light
brightness and wireless adjustment. Suitable for almost all shooting occasions, which can
offer lighting for live, camping, make up, portrait shooting, video, wedding, children
photography, etc. It’s portable and easy to be operated.
Features:
● High light brightness which can be freely adjusted in wide range
● Double color temperature: 3300K and 5600K can be switched
●Wireless adjustment
●Built-in lithium battery
●High-temperature resistance
●Handle use or being fixed on the tripod
●Suitable for almost all situation
●Intellectual memory
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of waterproof
in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and other
similar materials. In certain circumstance, these materials may be sensitive to the
strong light emitting from this flash unit and fire or electromagnetic interference may
result.
As this product has built-in lithium battery, do not disassemble, impact, squeeze or
put it into fire. If serious bulge occurs, please do not use. Do not use or store the
product if the ambient temperature reads over 50°C. Please charge the product with
specialized charger and correctly operate it within the defined voltage and working
temperate according to the instruction manual.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Handle
DC Power Jack
Bracket
Mounting Hole
Control Panel
Power Switch CH/GRP Button
MODE Button
Reflector
LCD Panel
“-”Button
“+”Button
Parts
● Body
516 LED Beads
- 09 - - 10 -
Reset Button
(insert a needle, and the
parameters can be
restored factory setting)
Foreword
Warning
Thank you for purchasing this Godox Product!
This LED Light Stick LC500 is a continuous light with double color temperature, high light
brightness and wireless adjustment. Suitable for almost all shooting occasions, which can
offer lighting for live, camping, make up, portrait shooting, video, wedding, children
photography, etc. It’s portable and easy to be operated.
Features:
● High light brightness which can be freely adjusted in wide range
● Double color temperature: 3300K and 5600K can be switched
●Wireless adjustment
●Built-in lithium battery
●High-temperature resistance
●Handle use or being fixed on the tripod
●Suitable for almost all situation
●Intellectual memory
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of waterproof
in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and other
similar materials. In certain circumstance, these materials may be sensitive to the
strong light emitting from this flash unit and fire or electromagnetic interference may
result.
As this product has built-in lithium battery, do not disassemble, impact, squeeze or
put it into fire. If serious bulge occurs, please do not use. Do not use or store the
product if the ambient temperature reads over 50°C. Please charge the product with
specialized charger and correctly operate it within the defined voltage and working
temperate according to the instruction manual.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Handle
DC Power Jack
Bracket
Mounting Hole
Control Panel
Power Switch CH/GRP Button
MODE Button
Reflector
LCD Panel
“-”Button
“+”Button
Parts
● Body
516 LED Beads
- 09 - - 10 -
Reset Button
(insert a needle, and the
parameters can be
restored factory setting)
Light Brightness
%
CH
K
Battery Level Indicator
Group
Channel Color Temperature
LCD Panel
Remote Control:
LCD Panel
(Black
in White)
Power Switch CH/GRP Button
SET Button
’’-’’ Button ’’+’’ Button
Battery
Compartment
Wireless Signal
Color
Temperature
Controllable
Group (6)
Light
Brightness
Channel(16)
BatteryLevelIndicator
LCDPanel
Included Items
1. Body 2. Reflector 3. Remote Control 4. Charger(16.8V/1.2A)
5. Portable Bag 6. Instruction Manual
Battery Management
● Power Supply
With built-in Li-polymer battery which can offer about 2 hours’lighting once got fully
charged.
● Charge
The whole charging time takes about 2.5 hours. The charge indicator turns to red in
charging while green once got fully charged.
Attaching Reflector
● Installation: Choose the side which needs reflector and adjust the reflector’s
direction. Match the ridge in the reflector’s handle ring with the groove on the
handle(as shown) and slip the reflector over the LED light stick and push in. Extend
the reflector for shooting.
- 11 - - 12 -
(1) (2)
(4) (3)
(5)
● Detachment: Hold the handle and push the reflector from the bottom up to detach.
Light Brightness
%
CH
K
Battery Level Indicator
Group
Channel Color Temperature
LCD Panel
Remote Control:
LCD Panel
(Black
in White)
Power Switch CH/GRP Button
SET Button
’’-’’ Button ’’+’’ Button
Battery
Compartment
Wireless Signal
Color
Temperature
Controllable
Group (6)
Light
Brightness
Channel(16)
BatteryLevelIndicator
LCDPanel
Included Items
1. Body 2. Reflector 3. Remote Control 4. Charger(16.8V/1.2A)
5. Portable Bag 6. Instruction Manual
Battery Management
● Power Supply
With built-in Li-polymer battery which can offer about 2 hours’lighting once got fully
charged.
● Charge
The whole charging time takes about 2.5 hours. The charge indicator turns to red in
charging while green once got fully charged.
Attaching Reflector
● Installation: Choose the side which needs reflector and adjust the reflector’s
direction. Match the ridge in the reflector’s handle ring with the groove on the
handle(as shown) and slip the reflector over the LED light stick and push in. Extend
the reflector for shooting.
- 11 - - 12 -
(1) (2)
(4) (3)
(5)
● Detachment: Hold the handle and push the reflector from the bottom up to detach.
Operation
● Switch: long press the power switch to power on the LED light and long press the
button again to power off.
● Mode selection: press the MODE button to switch the 5600K cold color
temperature and 3300K warm color temperature.
● Channel/group selection: press the CH/GRP button to choose the CH channel
value or GRP group value, then, pressing the “-“ or “+”button to change the channel
or group value.
● Light brightness adjustment: short press the “-” or “+” button to decrease or
increase the value in 1% while long pressing the “-” or “+”button to decrease or
increase the value in 10%. The light brightness can be adjusted from 10% to 100%.
Wireless Remote Control
With 433MHz wireless system, this product has remote grouping and control function.
Up to 6 groups of LED lights can be controlled. 16 channels are available with strong
anti-interference capability.
Please set the channels and groups of LED light stick to the same as those of remote
control before usage.
Adjusting Channel/Group of the LED Light Stick
● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to
choose a group ID (A to F).
● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or
“+” button to choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button
to choose a group ID (A to F).
● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or
“+” button to choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
● Press the “-” or “+” button to adjust the light brightness.
● Press the SET button of the remote control once and the color temperature icon
blinks. Press the “-” or “+” button to adjust the color temperature.
%
CH
K
%
CH
K
%
CH
K
%
CH
K
%
CH
K
● Operation: This LED light stick can be used by handle or on the light stand,
which can be freely applied according to the user requirement.
- 13 - - 14 -
Operation
● Switch: long press the power switch to power on the LED light and long press the
button again to power off.
● Mode selection: press the MODE button to switch the 5600K cold color
temperature and 3300K warm color temperature.
● Channel/group selection: press the CH/GRP button to choose the CH channel
value or GRP group value, then, pressing the “-“ or “+”button to change the channel
or group value.
● Light brightness adjustment: short press the “-” or “+” button to decrease or
increase the value in 1% while long pressing the “-” or “+”button to decrease or
increase the value in 10%. The light brightness can be adjusted from 10% to 100%.
Wireless Remote Control
With 433MHz wireless system, this product has remote grouping and control function.
Up to 6 groups of LED lights can be controlled. 16 channels are available with strong
anti-interference capability.
Please set the channels and groups of LED light stick to the same as those of remote
control before usage.
Adjusting Channel/Group of the LED Light Stick
● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to
choose a group ID (A to F).
● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or
“+” button to choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button
to choose a group ID (A to F).
● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or
“+” button to choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
● Press the “-” or “+” button to adjust the light brightness.
● Press the SET button of the remote control once and the color temperature icon
blinks. Press the “-” or “+” button to adjust the color temperature.
%
CH
K
%
CH
K
%
CH
K
%
CH
K
%
CH
K
● Operation: This LED light stick can be used by handle or on the light stand,
which can be freely applied according to the user requirement.
- 13 - - 14 -
* Product design and specifications are subject to change without notice.
Technical Data
Model
Built-in Lithium Battery
Power
Double Color Temperature
Channel
Group
100% Light Brightness(LUX)
TLCI Index
CRI Index
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight (without reflector)
LC500
14.8V/2600mAh lithium battery
Max. 18W
5600K±300K
3300K±300K
16
6 (A, B, C, D, E, F)
1200 (1 m)
≥95
>95
10%~100%
516
-5~50°C
565*56*56mm (reflector is not included)
760g
Remote Control
Power Supply
Wireless Frequency
Distance (emptiness)
Channel
Group
Standby Time
Operation Temperature
Dimension
Net weight
RC-A5
3.0V (AAA*2) (not include)
433MHz
≥10M
16
6 groups (A, B, C, D, E, F)
Over one year
-10~50 °C
120mm*38mm*15mm
30g
Note: The wireless signal can be received only when the LED Light Stick is
power on.
Other Operation Tips
● Pressing the ON/OFF button on the remote control can turn on/off all the LED
groups.
● Pressing the “SET” button on the remote control for 2 seconds can only turn on/off
the current LED group.
● The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(1) When using the cold temperature light, please set the color temperature of the
remote control as 5600K constantly.
(2) When using the warm temperature light, please set the color temperature of the
remote control as 3300K constantly.
(3) Please remove the battery if the light will not be used for an extended period of
time.
- 15 - - 16 -
* Product design and specifications are subject to change without notice.
Technical Data
Model
Built-in Lithium Battery
Power
Double Color Temperature
Channel
Group
100% Light Brightness(LUX)
TLCI Index
CRI Index
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight (without reflector)
LC500
14.8V/2600mAh lithium battery
Max. 18W
5600K±300K
3300K±300K
16
6 (A, B, C, D, E, F)
1200 (1 m)
≥95
>95
10%~100%
516
-5~50°C
565*56*56mm (reflector is not included)
760g
Remote Control
Power Supply
Wireless Frequency
Distance (emptiness)
Channel
Group
Standby Time
Operation Temperature
Dimension
Net weight
RC-A5
3.0V (AAA*2) (not include)
433MHz
≥10M
16
6 groups (A, B, C, D, E, F)
Over one year
-10~50 °C
120mm*38mm*15mm
30g
Note: The wireless signal can be received only when the LED Light Stick is
power on.
Other Operation Tips
● Pressing the ON/OFF button on the remote control can turn on/off all the LED
groups.
● Pressing the “SET” button on the remote control for 2 seconds can only turn on/off
the current LED group.
● The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(1) When using the cold temperature light, please set the color temperature of the
remote control as 5600K constantly.
(2) When using the warm temperature light, please set the color temperature of the
remote control as 3300K constantly.
(3) Please remove the battery if the light will not be used for an extended period of
time.
- 15 - - 16 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Andere Handbücher für LC500
1
Inhaltsverzeichnis
Andere Godox Beleuchtungsausrüstung Handbücher
Godox
Godox SZ200 Bi Bedienungsanleitung
Godox
Godox Quicker600IIM Bedienungsanleitung
Godox
Godox QT400IIM Bedienungsanleitung
Godox
Godox LEDP120C Bedienungsanleitung
Godox
Godox ML60Bi Bedienungsanleitung
Godox
Godox LEDP260C Bedienungsanleitung
Godox
Godox UL150 Bedienungsanleitung
Godox
Godox UL150IIBi Bedienungsanleitung
Godox
Godox LED 36 Bedienungsanleitung
Godox
Godox LDX100 Bi Bedienungsanleitung
Godox
Godox Lux Junior Bedienungsanleitung
Godox
Godox ST250 Bedienungsanleitung
Godox
Godox R1 Bedienungsanleitung
Godox
Godox ML30Bi Bedienungsanleitung
Godox
Godox RING72 Bedienungsanleitung
Godox
Godox SL150IIBi Bedienungsanleitung
Godox
Godox R2400 Bedienungsanleitung
Godox
Godox ML-150 II Bedienungsanleitung
Godox
Godox LDX50 R Bedienungsanleitung
Godox
Godox CL10 Bedienungsanleitung
Beliebte Beleuchtungsausrüstung Handbücher anderer Marken
Qazqa
Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung
Commercial Electric
Commercial Electric 54568141 Bedienungsanleitung
CREE LIGHTING
CREE LIGHTING 304 Series Bedienungsanleitung
Goobay
Goobay 49867 Bedienungsanleitung
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Bedienungsanleitung
Alkalite
Alkalite Krypton KT-81 Bedienungsanleitung
