Godox TL30 Bedienungsanleitung

Instruction Manual

   

Made in China



: 2

: 0755-29609320(8062) : 0755-25723423 : godox@godox.com

godox.com

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,

Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: [email protected]

GODOX Photo Equipment Co., Ltd.



Godox LightAPP

Scan the QR code directly to download the

"GodoxLight" smartphone APP

705-TL3000-00

RGB

RGB Tube Light



QCPASS

Foreword

Warning

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be

sent to an authorized maintenance center.

Keep out of reach of children.

As this product do not have waterproof function, please take measures of

waterproof in rainy or damp environment.

Do not use the flash unit in the presence of flammable gases, chemicals and

other similar materials. In certain circumstance, these materials may be

sensitive to the strong light emitting from this flash unit and fire or

electromagnetic interference may result.

As this product has built-in lithium battery, do not disassemble, impact,

squeeze or put it into fire. If serious bulge occurs, please do not use. Do not

use or store the product if the ambient temperature reads over 40°C.

Names of Parts

Thank you for purchasing this Godox Product!

This RGB Tube Light TL30 is a multifunctional RGB light with dual color temperature,

high light brightness and wireless adjustment. Suitable for almost all shooting

occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding,

children photography, etc. It's portable and easy to be operated.

• Freely switch LED CCT mode,RGB mode and 37 special effects modes.

• Easy to adjust color temperature, light brightness, hue and color saturation.

• Remote control by smartphone APP.

• Use in combination to make more creative light groups.

• Both ends have magnetic absorption function, can be attached to the plane of

iron products.

• Lightweight and portable, it can be held by hand, and the angle can be flexibly

changed.

1. Main Body

2. Power Switch

3. MOD Button

4. DIM Button

5. Select Dial

6. Display

7. Type-C USB Port

8. Screw Hole

9. Magnetic Absorption



















- 09 - - 10 -

Foreword

Warning

Always keep this product dry. Do not use in rain or in damp conditions.

Do not disassemble. Should repairs become necessary, this product must be

sent to an authorized maintenance center.

Keep out of reach of children.

As this product do not have waterproof function, please take measures of

waterproof in rainy or damp environment.

Do not use the flash unit in the presence of flammable gases, chemicals and

other similar materials. In certain circumstance, these materials may be

sensitive to the strong light emitting from this flash unit and fire or

electromagnetic interference may result.

As this product has built-in lithium battery, do not disassemble, impact,

squeeze or put it into fire. If serious bulge occurs, please do not use. Do not

use or store the product if the ambient temperature reads over 40°C.

Names of Parts

Thank you for purchasing this Godox Product!

This RGB Tube Light TL30 is a multifunctional RGB light with dual color temperature,

high light brightness and wireless adjustment. Suitable for almost all shooting

occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding,

children photography, etc. It's portable and easy to be operated.

• Freely switch LED CCT mode,RGB mode and 37 special effects modes.

• Easy to adjust color temperature, light brightness, hue and color saturation.

• Remote control by smartphone APP.

• Use in combination to make more creative light groups.

• Both ends have magnetic absorption function, can be attached to the plane of

iron products.

• Lightweight and portable, it can be held by hand, and the angle can be flexibly

changed.

1. Main Body

2. Power Switch

3. MOD Button

4. DIM Button

5. Select Dial

6. Display

7. Type-C USB Port

8. Screw Hole

9. Magnetic Absorption



















- 09 - - 10 -

Body *1

Type-C Charging Cable *1

Metal Piece *3 3M Paster * 3 pairs

Portable Bag *1

Instruction Manual *1

Battery Management

1. Power Supply

With built-in lithium battery which can offer about 1 hour's lighting in 100%

brightness once got fully charged.

The light can also be charged through USB cable.

What's in the Box

2. Charge

The whole charging takes about 1 hour and 30 minutes when using 5V/2A

charger (optional). The charge grids indicator will be blinking in charging while

displaying full grids once got fully charged.

Lanyard *1

CCT displayed on the screen

means CCT mode

Operation

1. Power Switch

Long press the switch power button for 1.5s to turn on or offi. Then, the current

information will be displayed on the OLED panel.

HSI displayed on the screen

means RGB mode

FX means special effects

mode

2.1 Bicolor Mode

2.1.1 Color temperature adjustment: turn the select dial to adjust the color

temperature from 2700K to 6500K.

Adjustment in 500 values quickly or 100 value normally by turning the select dial.

Press DIM button again to confirm, and the parameter stops flashing.

2. Mode Selection: CCT Mode/RGB Mode/

Special Effects Mode

Press MOD button to switch different modes:

>5600K 100

CCT

G/M:+49

>1: I

I100

3: I

S:99

>H:354 100

HSI

>2700K 100

CCT

G/M:+49

>2700K 100

CCT

G/M:+49

- 11 - - 12 -

Body *1

Type-C Charging Cable *1

Metal Piece *3 3M Paster * 3 pairs

Portable Bag *1

Instruction Manual *1

Battery Management

1. Power Supply

With built-in lithium battery which can offer about 1 hour's lighting in 100%

brightness once got fully charged.

The light can also be charged through USB cable.

What's in the Box

2. Charge

The whole charging takes about 1 hour and 30 minutes when using 5V/2A

charger (optional). The charge grids indicator will be blinking in charging while

displaying full grids once got fully charged.

Lanyard *1

CCT displayed on the screen

means CCT mode

Operation

1. Power Switch

Long press the switch power button for 1.5s to turn on or offi. Then, the current

information will be displayed on the OLED panel.

HSI displayed on the screen

means RGB mode

FX means special effects

mode

2.1 Bicolor Mode

2.1.1 Color temperature adjustment: turn the select dial to adjust the color

temperature from 2700K to 6500K.

Adjustment in 500 values quickly or 100 value normally by turning the select dial.

Press DIM button again to confirm, and the parameter stops flashing.

2. Mode Selection: CCT Mode/RGB Mode/

Special Effects Mode

Press MOD button to switch different modes:

>5600K 100

CCT

G/M:+49

>1: I

I100

3: I

S:99

>H:354 100

HSI

>2700K 100

CCT

G/M:+49

>2700K 100

CCT

G/M:+49

- 11 - - 12 -

2.1.2 Press the DIM button, then, press DIM button and the brightness value will be

blinking. Turn the select dial to adjust the value. Adjustment in 10 values quickly or

1 value normally by turning the select dial.

2.2 Colorful Mode

2.2.1 Adjust hue H: press the MOD button to switch to HSI interface. Press down

the select dial to choose H and turn the select dial to adjust hue. Adjustment in 10

values quickly or 1 value normally by turning the select dial.

2.2.2 Adjust saturation S: in HSI interface, press down the select dial to choose S

and turn the select dial to adjust saturation. Adjustment in 10 values quickly or 1

value normally by turning the select dial.

2.1.3 Hue adjustment: press the MOD button to switch to CCT interface. Press

down the select dial to choose G/M and turn the select dial to adjust hue from -50

to 0 and 0 to +50. Adjustment in 5 values quickly or 1 value normally by turning the

select dial.

CCT

G/M:+49

>2700K

CCT

>G/M:+50

2700K

S:99

>H:354 100

HSI

>S:99

H:354 100

HSI

3. Special Effects Modes (13 categories divided into 37 kinds)

3.1 Press the MOD button to switch to FX interface. Turn the select dial to choose

light effects categories from 1 to 13.

3.2 After choosing the current mode, press down the FN multifunctional select dial

from I, II and III.

>1: I

I100

3: I

>1: III

I100

3: I

- 13 - - 14 -

2.1.2 Press the DIM button, then, press DIM button and the brightness value will be

blinking. Turn the select dial to adjust the value. Adjustment in 10 values quickly or

1 value normally by turning the select dial.

2.2 Colorful Mode

2.2.1 Adjust hue H: press the MOD button to switch to HSI interface. Press down

the select dial to choose H and turn the select dial to adjust hue. Adjustment in 10

values quickly or 1 value normally by turning the select dial.

2.2.2 Adjust saturation S: in HSI interface, press down the select dial to choose S

and turn the select dial to adjust saturation. Adjustment in 10 values quickly or 1

value normally by turning the select dial.

2.1.3 Hue adjustment: press the MOD button to switch to CCT interface. Press

down the select dial to choose G/M and turn the select dial to adjust hue from -50

to 0 and 0 to +50. Adjustment in 5 values quickly or 1 value normally by turning the

select dial.

CCT

G/M:+49

>2700K

CCT

>G/M:+50

2700K

S:99

>H:354 100

HSI

>S:99

H:354 100

HSI

3. Special Effects Modes (13 categories divided into 37 kinds)

3.1 Press the MOD button to switch to FX interface. Turn the select dial to choose

light effects categories from 1 to 13.

3.2 After choosing the current mode, press down the FN multifunctional select dial

from I, II and III.

>1: I

I100

3: I

>1: III

I100

3: I

- 13 - - 14 -

3.3 There’re 37 kinds of situational special effects mode which are divided into 13

categories for your choice.

No. Display Situation Display

Slow speed

Flash

Birthday party

Discontinuous

Slow speed

Discontinuous

Firewood

Brief

Strong flash

Medium speed

Press conference

KTV

Frequent

Medium speed

Frequent

Campfire

Continuous

Frequent flash

Quick speed

Paparazzi

Disco

Sustainable

Quick speed

Sustainable

Fire hazard

Show

Quick flash

Display IIIDisplay II

4. Bluetooth Control

Note: the APP can be used directly o the firstly installed device (smartphone or iPad). When

changing to other mobile device, the light shall be reset before the normal usage of APP.

4.1 Bluetooth ON/OFF: long press the MOD button to enter Bluetooth interface.

Turn the select dial to choose the Bluetooth and press down to set it to ON or OFF.

4.2 Scan the QR code to download the "Godox Light"

smartphone APP(can be used by Android and Apple

system). For more smartphone APP operations,

please open the "help" in APP to gain detailed

guidance.

4.3 Bluetooth reset function: in Bluetooth interface, turn the select dial to choose

RESET. Then, press down the select dial until the RESET is displayed. The screen

will auto back to Bluetooth interface after being successfully reset.

RESET

MAC:EE93

> :ON

RESET...

* Product design and specifications are subject to change without notice.

Technical Data

TL30

3.7V/2900mAh/10.7Wh

5V/2A (optional)

Max. 8W

2700K~6500K

0%~100%

0 ~ 360°

740

Approx. 60 minutes

Smartphone APP

≈30m

-10~40 °C

42*300MM

0.3Kg

2402.0-2480.0MHz

5dbm

LED Light

Built-in Lithium Battery

Adapter

Output Power

Color Temperature Range

Light Brightness Range

RGB Color Gamut

100% Light Brightness (LUX)(≈)

CRl (≈)

TLCl (≈)

Duration(continuous output in 100%

full power in 2700K or 6500K)

Control Method

Bluetooth Wireless Control Distance

Operation Temperature

Dimension

Net Weight

BT Frequency Range

Max. Transmitting Power

- 15 - - 16 -

3.3 There’re 37 kinds of situational special effects mode which are divided into 13

categories for your choice.

No. Display Situation Display

Slow speed

Flash

Birthday party

Discontinuous

Slow speed

Discontinuous

Firewood

Brief

Strong flash

Medium speed

Press conference

KTV

Frequent

Medium speed

Frequent

Campfire

Continuous

Frequent flash

Quick speed

Paparazzi

Disco

Sustainable

Quick speed

Sustainable

Fire hazard

Show

Quick flash

Display IIIDisplay II

4. Bluetooth Control

Note: the APP can be used directly o the firstly installed device (smartphone or iPad). When

changing to other mobile device, the light shall be reset before the normal usage of APP.

4.1 Bluetooth ON/OFF: long press the MOD button to enter Bluetooth interface.

Turn the select dial to choose the Bluetooth and press down to set it to ON or OFF.

4.2 Scan the QR code to download the "Godox Light"

smartphone APP(can be used by Android and Apple

system). For more smartphone APP operations,

please open the "help" in APP to gain detailed

guidance.

4.3 Bluetooth reset function: in Bluetooth interface, turn the select dial to choose

RESET. Then, press down the select dial until the RESET is displayed. The screen

will auto back to Bluetooth interface after being successfully reset.

RESET

MAC:EE93

> :ON

RESET...

* Product design and specifications are subject to change without notice.

Technical Data

TL30

3.7V/2900mAh/10.7Wh

5V/2A (optional)

Max. 8W

2700K~6500K

0%~100%

0 ~ 360°

740

Approx. 60 minutes

Smartphone APP

≈30m

-10~40 °C

42*300MM

0.3Kg

2402.0-2480.0MHz

5dbm

LED Light

Built-in Lithium Battery

Adapter

Output Power

Color Temperature Range

Light Brightness Range

RGB Color Gamut

100% Light Brightness (LUX)(≈)

CRl (≈)

TLCl (≈)

Duration(continuous output in 100%

full power in 2700K or 6500K)

Control Method

Bluetooth Wireless Control Distance

Operation Temperature

Dimension

Net Weight

BT Frequency Range

Max. Transmitting Power

- 15 - - 16 -

Maintenance

This product, except consumables e.g. adapter and adapter cable, is

supported with a one-year warranty.

Avoid sudden impacts and the product should be dedusted regularly.

Maintenance of the flash must be performed by our authorized maintenance

department which can provide original accessories.

Unauthorized service will void the warranty.

If the product had failures or was wetted, do not use it until it is repaired by

professionals.

Changes made to the specifications or designs may not be reflected in this

manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction.

- 17 - - 18 -

Andere Handbücher für TL30

Inhaltsverzeichnis

Andere Godox Beleuchtungsausrüstung Handbücher

Godox

Godox SZ150R Bedienungsanleitung

Godox

Godox TL60 Bedienungsanleitung

Godox

Godox MG2400Bi Bedienungsanleitung

Godox

Godox Quicker600IIM Bedienungsanleitung

Godox

Godox ML-150 II Bedienungsanleitung

Godox

Godox LDX50 R Bedienungsanleitung

Godox

Godox SL150IIBi Bedienungsanleitung

Godox

Godox RING72 Bedienungsanleitung

Godox

Godox ML30 Bedienungsanleitung

Godox

Godox LEDP260C Bedienungsanleitung

Godox

Godox 2ABYN004 Bedienungsanleitung

Godox

Godox LC500R Bedienungsanleitung

Godox

Godox LED1000 Bedienungsanleitung

Godox

Godox KNOWLED M600 Bi Bedienungsanleitung

Godox

Godox LED1000D II Bedienungsanleitung

Godox

Godox LDX50 Bi Bedienungsanleitung

Godox

Godox KNOWLED AT200Bi Bedienungsanleitung

Godox

Godox LP75R Bedienungsanleitung

Godox

Godox DS300II Bedienungsanleitung

Godox

Godox TL60 Bedienungsanleitung

Godox

Godox SZ200Bi Bedienungsanleitung

Godox

Godox S60 Bedienungsanleitung

Godox

Godox WT25R Bedienungsanleitung

Godox

Godox ML60 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung