Goji GLITVBT18 Bedienungsanleitung
Over-ear Lites
Wireless Headphones
Instruction Manual
GLITVBT18
Contents
Safety Warnings...............................................................4
Unpacking........................................................................6
Product Overview............................................................7
Headphone...................................................................................... 7
Audio Cable ..................................................................................... 7
Charging the Battery.......................................................8
Switching On/O .............................................................9
Bluetooth Pairing ..........................................................10
Operation .......................................................................11
Operate with Audio Cable.............................................12
Hints and Tips.................................................................13
Specications.................................................................14
4
Safety Warnings
• For trac safety, do not use earphones while driving
or cycling.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any
doubt about it working normally, or if it is damaged in
any way - switch o, unplug from the mains socket and
consult your dealer.
Temperature
• Avoid extreme degrees of temperature, either hot or
cold. Place the unit well away from heat sources such as
radiators or gas / electric res.
• Avoid exposure to direct sunlight and other sources
of heat.
Naked Flames
• Never place any type of candle or naked ame on the
top of or near the unit.
Interference
• Do not place the unit on or near appliances which may
cause electromagnetic interference. If you do, it may
adversely aect the working performance of the unit,
and cause a distorted sound.
5
Earphones
• Listening to loud sounds for prolonged periods
of time may permanently damage your hearing.
• Before putting on earphones, turn the volume
down then put the earphones on and slowly
increase the volume until you reach a comfortable
listening level.
6
Thank you for purchasing your new
product.
We recommend that you spend some time
reading this instruction manual in order that you
fully understand all the operational features it
oers. You will also nd some hints and tips to
help you resolve any issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Unpacking
Remove all items from the packaging. Retain the
packaging. If you dispose of it please do so according
to local regulations.
The following items are included:
• Main Unit
• USB Charging Cable
• 3.5mm Audio Cable
• Instruction Manual
7
1. Status indicator
2. / button
• Increase volume
• Go to next track
3. / button
• Call function
• Bluetooth pairing
• Audio playback
4. / button
• Decrease volume
• Go to previous track
5. AUX IN socket
Connect the 3.5mm
audio cable with
music players or
mobile phones.
6. Microphone
7. ON/OFF Switch
Switch the
headphones on/o.
8. Charger connector
9. Battery indicator
Product Overview
Headphone
1
234
5
7
8
6 9
Audio Cable
Multifunction button Microphone
8
Charging the Battery
When using the unit for the rst time, charge it fully
rst.
1. Connect the USB charging cable to the earphones.
2. Connect the other end of the USB charging cable to
a powered USB device.
Status Battery Indicator
Low battery The Status indicator will flash in
red slowly.
Charging The Battery indicator will light
up red.
Fully charged The Battery indicator light will
extinguish.
9
Switching On/O
To switch on, switch the ON/OFF switch to ON position,
then press and hold until the status indicator lights
up.
• If the earphones are already paired with a Bluetooth
device before, it will automatically connect with the
last paired device when both are in pairing mode.
To switch o, press and hold until the status
indicator lights up for few seconds.
10
4. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select “GLITVBT18”.
5. If necessary, enter the passcode,“0000”, to pair and
connect the earphones. Some device also ask to
conrm the headset connection after paring.
6. The blue indicator will blink and the earphones
will beep after you have successfully paired the
earphones.
The Bluetooth feature and microphone
function will disable while using the 3.5mm
audio cable.
If no Bluetooth device is paired within
15 minutes, the headphones will switch o.
Bluetooth Pairing
1. Ensure the earphones is switched o.
2. Switch the ON/OFF switch to ON position.
3. Press and hold for 5 seconds to enter Bluetooth
pair mode. The red and blue indicator starts ashing
rapidly and alternately.
Inhaltsverzeichnis
Andere Goji Kabellose Kopfhörer Handbücher
Goji
Goji G4BOEBK14 Bedienungsanleitung
Goji
Goji GOVBT17 Bedienungsanleitung
Goji
Goji THE COLLECTION PRO GTCNBPM19 Bedienungsanleitung
Goji
Goji GTCNCPM21 Bedienungsanleitung
Goji
Goji Skyrider Blue GKIDBTB18 Bedienungsanleitung
Goji
Goji PRO GTCNCPM19 Bedienungsanleitung
Goji
Goji GLITOBT18 Bedienungsanleitung
Goji
Goji GLINBBT18 Bedienungsanleitung
Goji
Goji GTCIBTB18 Bedienungsanleitung
Goji
Goji GTCIBTB21 Bedienungsanleitung
