Goldair Platinum GPPH610 Bedienungsanleitung

Electronic Inverter Panel Heater with WiFi

Operating Instructions

Model: GPPH610, GPPH620, GPPH630

WiFi –Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels.

The Goldair app and device pairing process require your 2.4ghz connection to

be separated from your 5ghz connection. For instructions on how to do this

please contact your internet provider.

•Tap REGISTER near the bottom of the screen.

•Read and agree to the Privacy Policy.

•Add your email address.

•Tap 'Obtain verification code'

You will then receive an email with a verification

code.

Download Goldair mobile APP

•Open the APP Store or Google Play on your mobile phone.

•Open 'Search' and enter 'Goldair'

•Click 'GET' and begin to download and install.

Once downloaded to your phone open the APP

•Enter the verification code from your email.

•Create a password.

•Then tap confirm.

If you haven't received a verification code via

email, tap the resend button and when the

verification code is received follow above steps.

Your APP is now registered and ready for pairing

to your device.

Pairing APP to Device

Connect with 2.4ghz Wifi Network

On the Home screen,

tap ‘Add Device’ or

the ‘+’ icon.

Using the categories on

the left, navigate to

your device and tap on

the image.

Confirm you are connected

to a 2.4ghz network. If your

2.4ghz and 5ghz networks

are dual banded, click

‘Common router setting

method’ on how to split, or

contact your internet

provider.

Pairing APP to Device

Connect with 2.4ghz Wifi Network: EZ Mode

The app will default to EZ Mode in the

right hand corner.

Ensure your device’s Wifi LED is flashing

rapidly.

If it is not, hold down the ‘Wifi’ button

for 5 seconds or until the Wifi icon

begins to flash.

Click ‘Confirm indicator rapidly blink’

and ‘Next’

See instructions below to finalise your device pairing via EZ mode.

Your device will now pair with the app.

Please ensure your device, modem and

phone are as close together as possible

and that your 2.4ghz Wifi signal is strong.

Once the device has paired, choose

to rename it by tapping the Pen icon

Choose the most suitable room type and

click ‘Done’ in the top right hand corner.

Pairing APP to Device

Change ‘EZ Mode’ to ‘AP Mode’ by

clicking in the top right hand corner

Ensure your device’s Wifi LED is

flashing slowly.

If it is not, hold down the ‘Wifi’

button for 5 seconds or until the

Wifi icon begins to flash.

Click ‘Confirm indicator slowly

blink’ and ‘Next’

Click ‘Go Connect’ to

connect to the device’s

Hotspot by selecting the

network highlighted on the

screen in your app, e.g.

‘SmartLife- XXXX’

Select the device’s Hotspot

network and you will be returned

to the app. If not, navigate back to

the Goldair app.

Note- if you get a notification

saying ‘Internet may not be

available’ press Dismiss.

Your device will now pair

with the app.

Please ensure your

device, modem and

phone are as close

together as possible.

Connect with 2.4ghz Wifi Network: AP Mode

See instructions below to finalise your device pairing via AP Mode.

Once the device has paired,

choose to rename it by

tapping the Pen icon

Choose the most suitable

room type and click ‘Done’

in the top right hand

corner.

Operating your Device from the APP

If the phone interface color is dark red, this

indicates that the heater is in the OFF standby

setting.

•Tap the OFF icon and the heater will turn on.

The display will change to bright red.

•You can now control the heater.

•To turn the heater off again tap the power icon

and the heater will revert to the dark screen.

TEMPERATURE SETTING:

•Tap the "+" or "-" button to set the

temperature.

•When the set temperature is higher than the

ambient temperature, the heater begins to

heat.

•If the heater temperature setting is below

ambient temperature the heater will be in

standby mode and will not operate until the

ambient temperature drops below the set

temperature.

Depending on which mode you are in you can set

the temperature as below.

Comfort mode can be set from 5 –35oC

Economy mode can be set from 5 - 31oC

(this is pre-set so there is always a 4oC difference

between Comfort and Economy settings)

LED Display Icon

Tap this icon to turn off the LED display on the

heater. This does not affect the operation of the

heater.

To turn the heater display back on, tap the icon

again

Dark Red –Heater Off Bright Red –Heater On

MODE

Mode can be set to Comfort, Eco or Anti-frost.

Set your desired temperature in Comfort or Eco

modes by pressing "+" or "-" buttons.

The screen will display which mode has been

selected and the current set temperature and

ambient temperature.

Comfort mode can be set from 5 –35oC

Economy mode can be set from 5 - 31oC

(this is pre-set so there is always a 4oC difference

between Comfort and Economy settings)

Anti-frost mode is pre-set at 5oC and cannot be

adjusted.

HEAT SETTINGS

In USER, you can set the heat settings from ONE

(lowest) to FIVE (highest) and the set level will be

shown on the bottom of the APP.

It will also show on the heater display.

In AUTO, the heater will adjust the heat settings

automatically to suit the amount of power

required to reach and then maintain the set

temperature.

CHILD LOCK

Tap the padlock icon to display the closed padlock

and “ON”, indicating that the child lock is active.

Tap the padlock icon again to unlock the child lock.

You can adjust the heater settings with your mobile

phone without having to unlock the child lock.

If you want to adjust the heater using the heater

controls then you must first press the heaters press

both the UP and DOWN buttons

together for 3 seconds or tap the padlock button

on the APP to unlock it.

Operating your Device from the APP

AUTO OFF TIMER

When the heater is ON you can set it to turn OFF

after a number of hours (1-24 hours) has elapsed.

•In the APP, tap the heater to be operated and

enter the operation interface.

•With the power icon on the lower left corner of

the mobile phone interface is displaying ON

and the heater is turned ON.

•Tap the timer button and scroll to select the

number of hours before the heater will turn

OFF and tap OK to return to the heater

operation interface.

•The timer icon on the lower right will display

how long before the timer will turn the heater

OFF.

To cancel the timer, touch the timer button again

and the numbers will disappear and just show

timer.

Operating your Device from the APP

Set up Tap-To-Run & Create Smart Scenes

Store your favourite settings or set up automated

functions based on conditions in the ‘Smart’ part

of your Goldair app.

Warning- you must remember to turn off any

Smart functions prior to leaving the house or

going away. We recommend you only operate

your Goldair devices when someone is on the

premises.

•Tap ‘Smart’ on the bottom of your mobile phone.

•Tap ‘Create Scene’ or the ‘+’ icon on the top

right.

Click ‘Launch Tap-to-Run’ to save your preferred settings

on your devices to launch at the click of a button. Click

‘Run the device’ and choose a device. Preset your desired

functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’

Review your conditions and tasks on this screen, or

choose to add another device or task by clicking the ‘+’

icon.

Click Save to store your settings and your new task will

appear on the Smart homepage. Click it to operate your

desired task.

Set up Tap-To-Run & Create Smart Scenes

As well as setting up automated Tap-to-Run

tasks, you can set conditions to operate your

devices.

Weather:

Click ‘When weather changes’ to create a task based on your local outside weather.

Choose between temperature, humidity, weather type, sunset/sunrise or wind speed.

Select your desired condition and click ‘Next’. Click ‘Run the device’ and choose a device.

Preset your desired functions such as Power ON/OFF, temperature, mode and timer as

per on the device’s functions. Click ‘Next’. Review your conditions and click save. Your

automation will appear on the main Smart homepage.

Schedule:

Click ‘Schedule’ to create a task for your device at selected times of the day. Click ‘Repeat’

to choose days of the week or leave as ‘Once’ to operate as a one off. Choose your

desired time from the scroll bar and click ‘Next’. Click ‘Run the device’ and choose a

device. Preset your desired functions such as Power ON/OFF, temperature, mode and

timer as per on the device’s functions. Click ‘Next’. Review your conditions and click save.

Your automation will appear on the main Smart homepage.

Status Change

Click ‘When device status changes’ to create a condition based on any function on your

device, for example turning the Power Off when any device function is changed (to act as

a child lock)

Voice Control

Once your smart scenes are set up, you can use Amazon Alexa or Google Home Routines

to operate the scenes via voice control. Refer to your Amazon or Google Home user

guides for instructions on how to pair your routine to smart scenes.

Andere Handbücher für Platinum GPPH610

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Goldair Heizung Handbücher

Goldair

Goldair GCT250 Bedienungsanleitung

Goldair

Goldair Platinum GPPH610 Bedienungsanleitung

Goldair

Goldair GSOC100 Bedienungsanleitung

Goldair

Goldair GPH100-2PK Bedienungsanleitung

Goldair

Goldair GOC177C Montageanleitung

Goldair

Goldair GCT260 Bedienungsanleitung

Goldair

Goldair GCT340 Bedienungsanleitung

Goldair

Goldair GCT400 Bedienungsanleitung

Goldair

Goldair GFH150 Bedienungsanleitung

Goldair

Goldair GSMH120 Montageanleitung

Goldair

Goldair GCV355 Bedienungsanleitung

Goldair

Goldair GPOC418 Bedienungsanleitung

Goldair

Goldair Platinum GPPH610 Montageanleitung

Goldair

Goldair PLATINUM GPPH770 Bedienungsanleitung

Goldair

Goldair Platinum GPPH220 Bedienungsanleitung

Goldair

Goldair GCT360 Bedienungsanleitung

Goldair

Goldair GMH240 Bedienungsanleitung

Goldair

Goldair PLATINUM GPCV330 Bedienungsanleitung

Goldair

Goldair Select GSOC145 Bedienungsanleitung

Goldair

Goldair GGPH205 Bedienungsanleitung

Goldair

Goldair GCW220 Bedienungsanleitung

Goldair

Goldair GMH220 Bedienungsanleitung

Goldair

Goldair Select GSRH150 Bedienungsanleitung

Goldair

Goldair GCH210 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung

iLO

iLO IHP2424 Betriebsanleitung