Goldair GI310 Bedienungsanleitung

2400WIron

Item: GI310

Operating Instructions

NEVER

✘Never touch hot surfaces.

✘Never use this appliance outdoors.

✘Never use this appliance for any purpose

other than its intended use. This appliance is

for household use only or in similar applications

such as:

•Staff kitchen areas in shops, offices and

other working environments;

•Farm houses

•By clients in hotels, motels and other

residential type environments;

•Bed and breakfast type environments.

✘This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge, unless they are

supervised or have been given instruction

concerning the use of the Iron by a person

responsible for their safety.

✘Close supervision is necessary when the

appliance is near children.

✘Never leave the appliance unattended when

in use as clothing and material can burn.

✘Never place this appliance on or near a hot

gas or electric burner or where it could touch a

heated oven or microwave oven.

✘Never immerse any part of the Iron, or cord

set and plug in water or any other liquid to

protect against electrical hazards.

✘Never use harsh, abrasive or caustic

cleaners to clean this appliance.

✘Never operate the appliance with a

damaged cord or plug, after it malfunctions, or

if it has been damaged in any manner.

✘The Iron is not intended to be operated by

means of an external timer or separate remote-

control system.

✘The Iron must not be left unattended while it

is connected to the supply mains.

✘The plug must be removed from the socket-

outlet before the water reservoir is filled with

water.

✘The Iron is not to be used if it has been

dropped, if there are visible signs of damage or

if it is leaking

CAUTION:

BURNS MAY OCCUR FROM TOUCHING HOT

METAL PARTS, HOT WATER OR STEAM.

USE CAUTION WHEN YOU TURN THE IRON

UPSDIE DOWN AS TEHRE MAYBE HOT

WATER IN THE TANK.

General care and safety guide

TECHNICAL SPECIFICATION

Item No: GI310

Power Supply: 220-240VAC, 50Hz

Power: 2000-2400W

Thank you for choosing a Goldair Iron. This Goldair appliance has been

designed and manufactured to high standards of engineering and with

proper use and care, as described in this leaflet, will give you years of

useful service. Please read these instructions carefully and retain for

future reference.

ALWAYS

✔Always ensure hands are dry before

handling the plug or switching on the Iron.

✔Always operate the Iron on a secure, dry,

level surface.

✔Always operate the Iron on an ironing board

or similar surface.

✔Always be sure to unplug from the socket

when not in use and before cleaning.

✔Always allow the Iron to cool before cleaning

and storing.

✔Carry out regular checks of the supply cord

to ensure no damage is evident.

✔Return the Iron after a malfunction, or if it

has been damaged in any manner to an

authorised electrician for examination, repair or

adjustment as special purpose tools are

required.

✔The Iron must be rested on a stable surface.

Components

Before first use

Ensure any labels, tags or stickers that may be

attached to the body or soleplate of the iron are

removed.

It is normal for a small amount of smoke and

odor to be produced the first time your iron is

used, this is due to the initial heating of the

materials used to make the iron. When using the

steam function for the first time do not direct the

steam toward your garments, as there could be

debris from the steam vents that may damage

the garment.

Filling with water

WARNING: UNPLUG IRON TO FILL

We recommend the use of distilled water.

Ensure that both the variable steam button and

temperature dial are set to the minimum/low

heat position when filling.

Fill your iron only with water, do not add fabric

conditioners, starches or any other solution as

these will damage the steam mechanism.

Hold the iron in a tilted position when filling.

Use a cup or spout with a spout to fill the iron.

Life water inlet cover and fill by directing water

though the water filling inlet until the water

reaches the MAX mark (250ml)indicated on the

water tank. Never fill above this mark.

Press water tank inlet cover down until it clicks

into place.

A Soleplate

B Spray nozzle

C Water fill inlet and inlet cover

D Variable steam button

E Spray button

F Steam shot button

G 360°swivel cord

H Power on indicator light

I Temperature dial

J Self clean button

Getting to know your iron

SOLE PLATE

The sole plate is nonstick. It heats up and is

used to press/iron the garment.

While it is very durable, it does require care to

maintain its good looks. Please read the notes

below:

Before first use: wipe and thoroughly dry your

iron’s sole plate to remove any manufacturing

residue.

After every use: wipe and thoroughly dry.

Do not use steel wool, a wire brush, bleach or

abrasive cleaners. Steel wool can leave

particles of steel on the sole plate, damaging the

surface or your clothing.

Metal or hard plastics (for example buttons or

zips) may scratch the surface of the sole plate.

SPRAY BUTTON and SPRAY NOZZLE

Press the Spray Button to produce a fine mist of

water from the Spray Nozzle. This is useful if the

garment to be ironed is particularly creased.

Making the garment a little damp (not wet)

makes it easier to iron.

WATER TANK INLET

This is where you fill the water tank if you wish

to steam iron. Make sure the water does not

exceed the MAX level (250ml) as indicated on

water tank. Unplug iron to fill. We recommend

the use of distilled water. Please refer to filling

instructions on previous page of this user

manual.

VARIABLE STEAM BUTTON

Move the dial to select the desired steam output

for each garment. To iron with steam (DRY

IRON), the dial must be in OFF position.

Generally a thicker or heavier garment, or a

more creased garment, will require more steam.

STEAM SHOT BUTTON

Press this button for a shot of steam. This is

useful for eliminating stubborn creases. Steam

shot function is best used when iron is on MAX

temperature. Steam shot can be used when iron

is positioned vertically so is useful for removing

creased from hung clothes and curtains.

360°SWIVEL CORD

This allows free movement of the cord in any

direction for better manoeuvrability while ironing.

Also helps avoid tangles.

POWER ON INDICATOR LIGHT

When this light is on, it indicates that the iron is

heating. It will switch off when the selected

temperature is reached.

TEMPERATURE DIAL

Turn this dial to the correct position for the

garment you are ironing eg SYNTHETIC for

light, manmade fabrics.

DECALCIFICATION FEATURE

There is a decalcifation feature built into this

iron. It absorbs insoluble calcium ions and

converts them to soluble sodium ions. This

feature slows down the build up of calcium

deposits.

Getting started

1. Fill tank –refer to instructions on previous

page

2. Plus in iron and turn temperature dial to

your desired setting, depending on the

fabric of the garment you wish to iron.

Power indicator light will come on.

3. Ensure steam button is in DRY position.

4. Place iron vertically.

5. When selected temperature has been

reached, the indicator light will go out.

6. Set the steam button to your desired

setting and begin ironing.

SETTING TEMPERATURE

Follow instructions detailed on the label of the

garment you wish to iron. If there are no

instructions, use the indicative chart following.

If the garment consists of various fabric types,

select the temperature relevant tor the most

delicate of the fabrics that make up your

garment.

Using your iron

Goldair –New Zealand

Monday –Friday 8am-5pm

Phone +64 (0)9 917 4000

Phone 0800 232 633

[email protected]z

Goldair –Australia

Monday –Friday 8am-5pm

Phone +61 (0)3 9336 4423

Phone 1300 465 324

info@cdbgoldair.com.au

SUPPORT AND TECHNICAL ADVICE

SPRAYING

Press the spray button to spray water on your

garment, as often as required.

Note: When using the water spray function,

ensure that there is enough water in the water

tank.

Note: You may have to pump the spray button

several times at first use.

STEAM SHOT OR VERTICAL STEAM

IRONING

Press the shot of steam button to generate a

powerful burst of steam that can penetrate the

fabric and smooth the most difficult, tough

creases. Wait for a few seconds before pressing

again.

By pressing the burst of steam button at

intervals you can also iron vertically (i.e. curtains

and hanging garments).

Note: The burst of steam function can only be

used at high temperature. Stop using the Steam

Shot when the pilot light turns on as iron needs

to heat up again. Start ironing again only after

the pilot light has turned off.

DRY IRONING

For ironing without steam, follow the instructions

in the section “steam ironing”, however, the

steam control turning switch should be set to the

DRY position. (no steam).

HOW TO CLEAN & STORE YOUR IRON

After using, disconnect from power and tilt the

water filling hole downward over a sink to empty

the remaining water from the water tank.

Let the iron cool completely, then wipe flakes

and any other deposits on sole plate with a

damp cloth or non abrasive liquid cleaner.

Clean upper part of iron with damp cloth.

Always store the iron horizontally on a stable

surface with a cloth protecting the sole plate.

SELF CLEANING FUNCTION

The self-cleaning feature cleans inside the

soleplate, removing impurities. We recommend

using it regularly according to hardness of water

and frequency of use.

1. Fill water tank to MAX position and set

temperature dial to MAX position.

2. Connect to power supply, making sure

Steam button is in DRY position. Stand iron

up vertically.

3. When power indicator light goes out, hold

iron over sink and press SELF CLEAN

button. Steam and boiling water will come

out of soleplate, flushing out impurities and

calcium flakes.

4. Release button as soon as water in tank

has been used up

AUTO SHUT OFF FUNCTION

If the iron not used more than 30 seconds in

horizontal position or 8 minutes in vertical

position, it automatically turns off and the light

will flash.

As soon as you use the iron again, it will

automatically turn on and the light will stop

flashing.

Name ………………………………………………

Address ……………………………………………

……………………………………………………….

Suburb ……………………………………………

Purchased from …………………………………

Date of purchase …………………………………

Name of product …………………………………

Model no ……………………………………………

IMPORTANT: Please complete and retain this warranty card

Two year warranty

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture

when used in normal domestic use for a period of two years. In non-domestic use Goldair limits the

voluntary warranty to three months.

Goldair undertake to repair or replace this product at no charge if found to be defective due to a

manufacturing fault during the warranty period.

This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or

work carried out by anyone other than a qualified electrical service technician.

PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.

The benefits given to you by this warranty are in addition to other rights and remedies available to you

under law in relation to the goods or services to which this warranty relates.

In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount to a major failure.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee

Act (1993).

Attach a copy of the purchase receipt to this warranty card

Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.

Goldair –New Zealand

CDB Goldair

PO Box 100-707

N.S.M.C

Auckland

Phone +64 (0)9 917 4000

Phone 0800 232 633

www.goldair.co.nz

Goldair –Australia

CDB Goldair Australia Pty

PO Box 574

South Morang

Victoria, 3752

Phone +61 (0)3 9336 4423

Phone 1300 GOLDAIR (1300 465 324)

www.goldair.com.au

Inhaltsverzeichnis

Andere Goldair Eisen Handbücher

Goldair

Goldair GI200 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung