INTRODUCTION
First and foremost we would like to thank you for purchasing this product.
Our commitment to achieving the satisfaction of customers like you is manifested through our ISO-9001 certification
and the manufacture of products like the one you have just purchased.
Its advanced technology and strict quality control will ensure that customers and users enjoy the numerous features
that this device offers. To get the most out of them and ensure proper operation from day one, we recommend that you
read this instruction manual.
CONTENTS
2
SET-UP WARNINGS
-Do not overtighten the screws on the Bus connection terminals of the DQ-CAM-GB2 module.
-Before connecting the device, check the connections of the DQ-CAM-GB2, the cameras and the FA-GB2Apower supply.
-Use the Golmar cable (2x1mm ).RAP-2150 2
-Always follow the instructions contained in this manual.
DQ-CAM-GB2 CAMERA INTERFACE
Introduction...................................................................................................................................................................2
Contents...................................................................................................................................................................... 2..
Set-up warnings.......................................................................................................... ........2.......................................... .
Safety precautions................................................................................................................................... .........2............ .
Characteristics..............................................................................................................................................................2.
Description of the DQ-CAM-GB2 camera interface.........................................................................................................
.................................................................................................................................................................3.
Description
Installation......................................................................................................................................................................
....................................................................................... ...3. .
Illustration of DQ-CAM-GB2 camera interface installation
............................................................................................... .4...................................Description of the DIP switches
............................................................................................................................... .5.... .Description of the status LEDs
................................................................................................................... .5.Description of the CAM1~CAM4 buttons
RAP-2150 cable (Golmar) characteristics................................................................................................... . 5................. .
Wiring diagrams........................................................................................................................................... ...................
..........................................................................6.
Video door entry system installation with 4 analogue CCTV cameras
Notes............................................................................................................................................................................7.
SAFETY PRECAUTIONS
-..Always disconnect the power supply before installing or making modifications to the device
-.The fitting and handling of this device must be carried out by authorised personnel
-The wiring must run at least 40 cm away from any other wiring.
-Install the DQ-CAM-GB2 module in a dry protected location free from the risk of dripping or splashing water.
-Install the DQ-CAM-GB2 module with an FA-GB2A power supply.
-Avoid locations that are humid, dusty or near heat sources.
-Ensure that the air vents are free from obstruction so that air can circulate freely.
-To prevent damage, the DQ-CAM-GB2 module must be firmly secured in place.
CHARACTERISTICS
-DQ-CAM-GB2 camera interface module with simplified wiring (non-polarised 2-wire bus).
-DQ-CAM-GB2 camera interface module for the GB2 system :(do not use RD-GB2A modules in the same installation)
w'Building' installation:
-Up to 1 DQ-CAM-GB2 camera interface.
-Up to 4 analogue CCTV cameras (the cameras must have their own power supply).
-The camera interface must be installed on the door panel Bus side (see wiring diagram p. ).6
-Important: bus amplifierDo not install the camera interface in installations with the RD-GB2A .
- Configuration .DIP switches
-Status LEDs.
-Install the DQ-CAM-GB2 module with an FA-GB2A power supply.
