Good-Lite CSV1000 Bedienungsanleitung

CSV1000

CSV1000 HG

CSV1000

USER GUIDE

CSV1000 User Guide

Table Of Contents

Introduction..................................................... 2

Services & Important Safeguards .................................. 3

Product Speciﬁcations ........................................... 4

Calibration of CSV1000 (HG) ...................................... 4

Mounting Guide ................................................. 5

Mounting Guide (Continued) - Optional Floor Stand ................. 6

Test Face Application ............................................ 7

Maintenance and Service of Glare Lights ........................... 8

Remote Control Functions and Maintenance ........................ 9

Remote Control Functions and Maintenance (Continued).............10

Cleaning and Care ..............................................11

Disposal of Instrument ...........................................11

Important Tips and Storage .......................................11

Warranty........................................................12

Electrical Compatibility ...........................................13

CE Compliance ..................................................13

Legal Notices ...................................................14

www.good-lite.com | 1.800.362.3860 | 1.888.362.2576 fax

Introduction

CONGRATULATIONS on your purchase of the standardized CSV1000 (HG) vision

testing instrument. The device is CE marked and RoHS compliant.

PLEASE READ THIS GUIDE CAREFULLY BEFORE USING YOUR CSV1000 (HG)

INSTRUMENT. SAVE THIS GUIDE FOR FUTURE REFERENCE. FAILURE TO FOLLOW

THE GUIDES, WARNINGS AND CAUTIONS MAY RESULT IN SERIOUS PERSONAL

INJURY, PROPERTY DAMAGE AND/OR MAY VOID THE WARRANTY.

CSV1000 User Guide

Service & Important Safeguards

Service Information

WARNING: Any repairs requiring disassembly should be performed by Good-Lite

personnel. There are no user serviceable parts except for two (2) halogen glare

lamps and the battery in the remote control.

WARNING: To reduce the risk of ﬁre, electrical shock, injury, or damage to the

instrument, please observe the following:

Do not use if instrument is damaged in any way.

Use this instrument only for its intended purpose as a standardized vision test. Never

leave the CSV1000 (HG) plugged in during long term storage.

Never insert or drop objects into any opening or crevice in the instrument.

Do not use on or near hot surfaces.

Only use the power cord supplied with the instrument. Do not use this power cord

with any other instrument.

To protect against risk of electrical shock, do not put the power cord in water or other

liquid.

Do not allow the power cord to hang over the edge of a table or touch hot surfaces.

Do not operate if power cord is damaged.

If the instrument is not functioning normally or has been dropped or damaged in any

way, return to Good-Lite for repair or replacement.

www.good-lite.com | 1.800.362.3860 | 1.888.362.2576 fax

Product Speciﬁcations

Input Voltage: 100VAC - 240VAC, 47-63Hz

Light Source - Glare (CSV1000 HG Only):

12v20w BAB/CG MR16

Dimensions:

CSV1000 = 25.75”W x 21”H x 3.9375”0

(65.40 cm x 53.34 cm x 10 cm)

CSV1000 HG= 27.4375”W x 21”H x 3.9375”0

(69.69 cm x 53.34 cm x 10 cm)

Weight: 30 lbs (13.6 kgs)

Calibration of the CSV1000 & CSV1000 HG

Calibration of the instrument is performed at the factory before it is shipped to the

user. The back light sources are calibrated to provide a light level at the testing

surface of 85 cd/m2The glare source is calibrated so that the glare intensity simulates

a pair of oncoming halogen car headlights as viewed from a distance of 150 feet.

Calibration of the instrument by the user is not advised and may invalidate the

warranty. The user can change the intensity of the glare sources during testing. If

the user chooses to change the glare intensity from the calibrated factory level, it

is recommended that the user record the glare source intensity as indicated by the

digital read out on the front of the instrument.

ESV1000

CSV1000 User Guide

Mounting Guide

Mounting to a Wall

FAILURE TO SECURELY MOUNT THE INSTRUMENT ON A WALL OR OPTIONAL

FLOOR STAND MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE

AND MAY VOID THE WARRANTY.

Wall Mounted

The back of the CSV1000 (HG) instrument has (2) keyhole slots that are 16-inches

apart (40.64cm). Use fasteners designed for a wall mounting that have a rating of at

least 60 lbs (9 Kgs).

CSV1000

ESV1000

www.good-lite.com | 1.800.362.3860 | 1.888.362.2576 fax

Mounting Guide (Continued)

Floor Stand Mounted (Optional)

1. Insert tapered end of large pole into the caster base.

2. Attach T-pole to instrument with (4) thumb screws.

(Note: It may be necessary to lie the unit ﬂat to install)

3. Insert T-pole with instrument attached into larger pole and pin at desired height.

CSV1000

CSV1000 User Guide

Test Face Application

1. Place Test Face near top surface of CSV1000 (HG) Instrument and attach to

instrument as shown.

2. Insert the bottom section of the Test Face behind the bottom of frame.

www.good-lite.com | 1.800.362.3860 | 1.888.362.2576 fax

Maintenance and Service (Optional)

The glare source lamps generate considerable heat and should not be touched while

the bulb is on or within 15 minutes after the bulbs have been turned o. When a glare

source bulb burns out, it can be removed and replaced by the user. The user can

replace the bulb by removing the retaining clip and safety lens, removing the expired

bulb, placing in a new bulb, and replacing the safety lens and retaining clip.

Note:

In order to control heat build-up, glare lights will automatically shut down within 60

seconds of being illuminated. To restart, press the Glare Source button on the remote

control. See Page 9 for remote control functions.

ESV1000

CSV1000 User Guide

Remote Control Functions & Maintenance

*** Indicates Options Only Available on CSV1000 HG Model

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Good-Lite Prüfgeräte Handbücher

Good-Lite

Good-Lite Single LEA Symbols Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung