Goodmans GCR1873i Bedienungsanleitung

Keep this manual for future reference

User's Manual

IPOD DOCKING SPEAKER

MODEL NO.GCR1873i

CONTENTS

Function Description………………………………………1

Declaration…………………………………………………1

About the speaker…………………………………….........2

Keys and ports of the product……...……………………….2

Keys of the remote controller…………...………………….4

Basic functions……………………………………………..5

Power on…..……………………………………………...…5

Play…………………..…………………………………...…5

TUNER….……………………………………………….....5

IPOD………………………………………………………...6

USB………………………………………………………....6

AUX………………………………………………………...6

Pause…….……………………………………..............…..7

Stop …………………………………………..………….....7

Skip-/Skip+ select …….……………………………….…..7

Volume+/-…………………..……………………………...7

REPEAT …………………………………………………...7

EQ………………………………………………………..…7

Mbass…………………………………….………………...7

Sleep setting………………………………………………..7

Clock……… ……..………………………………………..8

Alarm setting……..………………………………………..9

Troubleshooting…………….…………………………......11

Introduction

Thank you for purchasing this new generation multi-functional

speaker!

This product is equipped with multiple functions.

It deserves the name of “Masterpiece” due to its high sound

quality, reliable performance and wonderful industrial design.

May you enjoy great joys and funs from this product.

The speaker integrates powerful functions with exquisite

workmanship.

Main features:

Built-in FM radio

FM (87.5-108MHz)

MW (520-1710KHz)

USB playing

AUX external input

IPOD playing

IPOD video output

Sleep

Clock

Alarm

Sound effects: STUDIO,ARENA,MONITOR,CLUB,FLAT

The unit can provide the backup battery for the time memory,

the unit will not lose the time display when power off, usually

the maximum of memory time is 6 days after powering off.

Precautions:

Firstly, thank you for using this digital composite speaker.

For correct use of it, please carefully read through the operation

manual before use.

Our company reserves the right to make changes on the contents

of this manual, properties and functions of the product without prior

notice.

For better performance of the product, please do not use it under

extreme high or low temperature, humidity, or in the place with

much dust. Particular attention shall be paid to following situations:

1.humid or underwater environment

2.heater or high temperature environment

3.exposed to direct sunlight

4.Environment apt to fall down

5.Do not disassemble the product by yourself to avoid loss of the

right to warranty.

1 2 3 45 6

123456789

10 11 12

1.AUX: External sound source input

2.USB: USB port

3.VIDEO/OUT: IPOD video output

4.DC 12V: DC output cord

5.FM ANT: FM antenna port

6.IPOD: IPOD jack

Keys, ports and their functions:

POWER: Power On/Off

STOP/BAND: Stop/band select

PLAY/PAUSE/SCAN: Play/pause/scan stations

SKIP-: Previous

SKIP+: Next

FUNCTION: Function shift

MEMORY: Memory key

EQ/MBASS: Sound effect/bass effect select

RAN/ST: Random play/ Shift of tracks

REP/M+: Play mode select/memorized station select

VOL-: Volume decrease

VOL+: Volume increase

POWER: Power On/Off

AL1: Alarm setting 1

AL2: Alarm setting 2

MUTE: Soundless

1-0: digit keys

INPUT: Input key

SLEEP: Sleep setting

MEM/SET: Memory/clock setting key

RAN/ST: Random play/shift of tracks

REPEAT: Play mode

MBASS: Mbass key

Functions of remote controller keys:

REV: Previous/fast backward

FWD: Next/fast forward

M+:Memory +/ select previous item on menu

M-: Memory-/select next item on menu

FUNCTION: Function shift

ENT: Ent

MENU: Menu

VOL+: Volume increase

PLAY/PAUSE/SCAN: Play/pause/scan station

STOP/BAND: Stop/band select

EQ: sound effect setting

VOL-: Volume decrease

Power on: After plugging the DC12V transformer into the port

on the back of the product, the screen lights up and time is

displayed on the screen. Press POWER key to power it on.

Play

1.TUNER: Directly enter FM TUNER state after power on.

(MW operation is same as that of FM.)

Manual radio station searching or direct input: Press SKIP-,

SKIP+ to search radio stations manually, or press INPUT key on

remote controller to input directly the radio frequency (e.g. input

0875 for 87.5 MHz)

Automatic scan: Long press SKIP-, SKIP+ key for more than2

seconds to enter automatic searching radio station mode and it

atomically stops when a radio station is searched out.

Fully automatic scan: Long press PLAY/PAUSE/SCAN key

for more than 2 seconds for fully automatically searching radio

stations It will scan from low to high frequency for local radio

stations with strong signal and save the station automatically.

During scanning, it pre-plays for 3 seconds and shows number

of the station and frequency it saves.

Press STOP/BAND key to shift between FM/AM.

Select a memorized station: Press REP/M+ key on the player

panel to shift to the radio stations it memorizes.

Press M+ or M- to select the desired station.

1234

910

13 14

17 18

2. IPOD: In the state of FM or AM, short press FUNCTION to

shift to IPOD function. At the time, plug IPOD into IPOD port

to play IPOD music.

Video play: Connect TV video cable to VIDEO OUT jack,

and plug IPOD into IPOD port, open TV OUT on the video file.

While playing video file at this time, corresponding video

pictures will be displayed on TV screen. The product outputs the

sound of the movie normally.

3. USB: In stop state of IPOD, short press FUNCTION to shift to

USB function. Insert USB disk into USB port. At the time,

if it reads content, “no” will be displayed. After successfully

reading, it displays “on”. Press PLAY/PAUSE/BAND to start

playing the music via USB.

4. AUX: In stop state of USB, short press FUNCTION to shift to

AUX function. At the time, insert external sound source

(e.g. MP3, CD) into AUX port on the back of the product to

enjoy the music from AUX. (Make sure that external sound source

is in Play state.)

Pause function: In play state of USB or IPOD, short press

PLAY/PAUSE/BAND for a pause of playing.

Stop function: In play or pause state of USB or IPOD, short press

STOP key to stop playing.

Music select: In play state of USB or IPOD, short press

SKIP-/SKIP+ for previous/next music.

Volume: In state of play or pause, short press VOL+ or VOL- for

volume increasing or decreasing, ranging from 00-30.

REPEAT function: In state of play or pause of IPOD, short press

REPEAT for selection of play mode, such as normal, repeat one,

repeat all.

EQ: In any state of play/pause/stop, short press EQ/MBASS for

mode selection with the sequence of STUDIO,ARENA,MONITOR,

CLUB and FLAT.

Mbass function: In any state of play/pause/stop, long press

EQ/MBASS key to turn on MBASS function. At the time,

“MBASS” is displayed on LCD. Press EQ/MBASS key again to

cancel the function of MBASS.

Sleep setting: In any state of play/pause/stop, short press SLEEP

key on the remote controller to set sleep time for SLEPP00,

SLEEP10, SLEEP20, SLEEP30, SLEEP40, SLEEP50, SLEEP60,

SLEEP70, SLEEP80, SLEEP90.

Clock setting: (3 methods)

1. During playing press POWER key to enter STAND By state.

At the time, time is displayed. After pressing MEM/SET key on

the remote controller, “Hour” flashes on LCD. Press Skip- or

Skip+ to adjust “Hour”. After pressing MEM/SET key again,

“Hour” on LCD stops flashing to display the digit confirmed.

And then “Minute” flashes. Press P Skip- or Skip+ to adjust

“Minute”. Press MEM/SET key again to confirm setting and

returns back to time display state.

2. During playing,after pressing MEM/SET key on the remote

controller, “Hour” on LCD flashes. Press INPUT on remote

controller, LCD will display “ : ”, and then directly press digit

keys on the remote controller to input the time desired.

For example, input 0830 for 8:30. This product adopts 12-hour

system. Please input 20:30 for 8:30 pm. After completing

inputting, return back to time display state.

Alarm function:

·Alarm time setting: (2 methods)

1.Press POWER key to enter STAND By state. After long pressing

AL1 on the remote controller, “Hour” on LCD flashes. Press

Skip- or Skip+ to adjust “Hour”. After pressing AL1 again,

“Hour” on LCD stops flashing to display the digit confirmed.

And then “Minute” flashes. Press Skip- or Skip+ to adjust

“Minute”. Press AL1 key again to confirm setting and returns

back to time display state. During alarm time setting, alarm

icon flashes.

2.Press POWER key to enter STAND By state. After long pressing

AL1 on the remote controller, “Hour” on LCD flashes.

Press INPUT on remote controller, LCD will display “ : ”,

and then directly press digit keys on the remote controller to input

the alarm time desired. For example, input 0830 for 8:30.

This product adopts 12-hour system. Please input 20:30 for

8:30 pm. After completing inputting, return back to time display

state. (AL2 setting is same as that of Al1)

In any mode, the Alarm Volume can not be set up and changed.

3. During playing press POWER key to enter STAND By state,

time is displayed. After pressing MEMORY key on the remote

controller, “Hour” on LCD flashes. Press Skip- or Skip+ to

adjust “Hour”. After pressing MEM/SET key again, “Hour” on

LCD stops flashing to display the digit confirmed. And then

“Minute” flashes. Press Skip- or Skip+ to adjust “Minute”.

Press MEM/SET key again to confirm setting and returns back to

time display state.

·Alarming mode setting: In STAND BY state, short press AL1 to

select an alarming mode, the available modes in sequence are

alarming state, IPOD state, TUNER state and cancel alarming.

(After alarming time is set, it will alarm only when an alarming

status has been selected)

· Enable snooze function: When it keeps alarming, press any key

(except POWER, VOL+ and VOL- keys) to turn on snooze

function. “SNOOZE” will be displayed on LCD.

·Cancel snooze function: When SNOOZE is being displayed on

LCD, short press POWER key to cancel snooze function.

At the time, SNOOZE disappears from the LCD.

Troubleshooting

1.No power supply

Solution: Please make sure the power socket is in good condition.

2.No music played out

Solution: Make sure it is in play state and volume is not at 00 level.

Attachment:

1.Users' Manualx1

2.FM Antennax1

3.VDE type adaptorx1

4.Remote controllerx1

5.IPOD Transformable switch x6

10 1 1

Andere Goodmans Docking-Lautsprecher Handbücher

Goodmans

Goodmans GSPK28WIP Bedienungsanleitung

Beliebte Docking-Lautsprecher Handbücher anderer Marken

Philips

Philips DS7510/12 Bedienungsanleitung

Philips

Philips AD305 Bedienungsanleitung

Philips

Philips DS7530 Bedienungsanleitung

LG PA36 Bedienungsanleitung

PURE

PURE Contour Bedienungsanleitung

Philips

Philips DS7650/98 Bedienungsanleitung

LG ND8520 Bedienungsanleitung

Maxell

Maxell BT3100 Bedienungsanleitung

Boston

Boston i-DS3 plus Bedienungsanleitung

aqprox!

aqprox! APPSP06X Bedienungsanleitung

iLive

iLive ISD291B Bedienungsanleitung

JBL

JBL on stager III WM Bedienungsanleitung

Philips

Philips Fidelio DS7650/37 Bedienungsanleitung

JAMO

JAMO i200 FM Bedienungsanleitung

AUVIO

AUVIO Auvio 40-294 Bedienungsanleitung

Insignia

Insignia NS-IPSD1 Kurzanleitung

Pioneer

Pioneer XW-NAS3 Bedienungsanleitung

Amethyst

Amethyst A9 iExecutive Bedienungsanleitung