Goodmans CANVAS2 Series Bedienungsanleitung

USER MANUAL

MODEL: CANVASSTE / CANVASCOP / CANVASSLT

Digital Radio with FM and Colour Screen

CANVAS2

Welcome1

Troubleshooting5

Technical Speciﬁcations6

Customer Support7

Your DAB Digital Radio

2.1 In The Box

2.2 Front View

2.3 Rear View

Quick Setup

3.1 Power On and Autoscan

3.2 Changing DAB Stations

3.3 Adjusting the Volume

3.4 Switching Off

Features4

DAB/FM button

4.1 Switching to FM/DAB Mode

INFO button

4.2 View Station Information

4.3 Changing the DAB or FM Display Information

MENU button

4.4

Station List (DAB)

4.5 Full Scan (DAB)

4.6 Scan Setting (FM)

4.7 Audio Setting (FM)

4.8 Manual Tune

4.9 Prune

4.10 Prune

4.10 DRC (Dynamic Range Control)

4.11 Set Egg timer

4.12 Set Sleep

4.13 Set Alarm

4.14 Set Time/Date

4.15 Set Backlight

PRESET button

4.19 Storing DAB Presets

4.20 Selecting a Preset Station

correspondingsections

4.16 Set Language

4.17 Factory Reset

4.18 SW Version (Software Version)

CANVAS2

Welcome

Thank you for choosing this Goodmans product. We’ve been

making electronics for the British people for 70 years. Each of

our projects has been carefully designed to be great at what it

does and this one is no exception. We hope you enjoy your

new CANVAS2 DAB Digital Radio.

Your DAB Digital Radio2

In The Box

Carefully remove your DAB Digital Radio from the box.

Inside the box you will ﬁnd:

•DAB Digital Radio

•Mains power supply lead

•Quick Start Guide

•Guarantee Booklet

If any of these items are missing contact

Customer Support at www.goodmans.co.uk/support

2.1

Mains Power

Your DAB/FM Radio requires a mains supply of 230V AC ~ 50 Hz.

Please ensure that your mains supply is compatible before use.

Disconnect the Power Cord from the mains when not in use.

Position of DAB Digital Radio

Place on a ﬂat, stable surface that is not subject to vibrations.

Avoid the following locations:

•Where it is exposed to direct sunlight

•Where it is close to heat radiating sources

•Where the humidity is high and ventilation is poor

•Where it is dusty

Adjusting the Aerial

Fully extend the aerial to ensure good reception in both DAB and

FM Radio modes. It may be necessary to alter the position of the

DAB Digital Radio and/or the aerial to achieve the best signal.

Using Headphones

Headphones require a 3.5mm diameter stereo plug and an

impedance of 8-32 ohms. Headphones are not supplied with

this DAB Digital Radio.

CANVAS2

Front View

Rear View

2.2

2.3

POWER button.

Press to switch between

ON and Standby.

DAB/FM button

Press to switch between

DAB and FM mode.

INFO/MENU button

Short press to view station

information. Or press and

hold to display menu options.

PRESET

Press and hold to save a station

as a preset, or press to recall

a saved preset station.

Channel -/+ button

Select button

Volume -/+ button

C D

Aerial

DC-In socket

Used to connect the DAB Digital

Radio to the mains power supply.

Headphone socket

Used to connect the DAB Digital

Radio to the hjeadphone.

TAKE CARE WITH

LIVE ELEMENTS

CANVAS2

Quick Set Up3

Power On and Autoscan

1. Connect the power cable to the DAB Radio and mains supply, or insert 4 x AA batteries into the

battery compartment.

Note: There is not standby mode during using the battery only.

Raise and extend the aerial.

Turn Canvas2 on by pressing the POWER button.

The ﬁrst time the radio is switched on, it will start up in DAB mode. It will automatically scan

for the available radio stations.

3.1

3.2 Changing DAB Stations

In the DAB mode, the CHANNEL button allows you to navigate between different stations.

Press SELECT to choose the one you want to listen to.

3.3 Adjusting the Volume

Press the VOLUME button to increase or decrease volume respectively.

ﬁg.2

3.3 Switching Off

The POWER button allows you to turn on the radio and switch to standby. You need to unplug

the power supply to switching off the DAB radio.

DAB/FM button

Features4

Switching to DAB/FM Mode

1. If the DAB Digital Radio is in DAB mode, press the DAB/FM

button repeatedly until FM is shown on the display.

Once in FM mode, your DAB Digital Radio will tune to the

start of the available FM range (87.50MHz) or the last FM

station listed to ﬁg.2.

To manually change the FM frequency, make sure that you

have not selected any other sub-menus. Turn the TUNE/

SELECT dial to change the frequency by 0.05MHz.

4.1

4.2 View Station Information

Press the INFO/MENU button repeatedly to display information

about the station you are on.

INFO button

4.3 Changing the DAB or FM Display Information

Press the INFO/MENU button repeatedly to display information

about the station you are on.

87.50MHz

[No Radio Text]

4.4 Station List (DAB)

MENU button

4.5 Full Scan (DAB)

Press the INFO/MENU button repeatedly to display information

about the station you are on.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Full Scan and press

SELECT button to conﬁrm.

Note: If no station is found, t shows No Station found. For a

Better reception, extent the antenna or do the full scan

again in another place.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Station List and press

SELECT button to conﬁrm.

3. Press CHANNEL button to choose the station you want listen

to and press SELECT button to conﬁrm.

4.6 Scan Setting (FM)

By default, FM scans stop at any available station (All station).

This may result in poor quality audio from weak station.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Scan Setting and press

SELECT button to conﬁrm.

3. Press CHANNEL button to select and press SELECT button

to conﬁrm the change of particular option.

4.7 Audio Setting (FM)

By default, all stereo stations are reproduced in stereo. For weak

stations, this may result in poor quality audio. The audio quality

can be improved using mono.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Audio Setting and press

SELECT button to conﬁrm.

3. Press CHANNEL button to select and press SELECT button

to conﬁrm the change of particular option.

4.8 Manual Tune

As well as the normal method of scanning, you can also manually

tune to a particular channel or frequency. This can be useful for

adjusting your antenna to achieve the best possible reception

and scanning a particular channel to update the station list.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Manual Tune and press

SELECT button to conﬁrm.

3. Press CHANNEL button to select and press SELECT button

to conﬁrm the change of particular option.

CANVAS2

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

>Scan Setting

Auto Setting

System Settings

16:02

Strong St

Stereo All

>Scan Setting

Auto Setting

System Settings

16:02

Strong St

Stereo All

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

4.9 Prune Invalid (remove stations that are listed but unavailable)

4.10 DRC (Dynamic Range Control)

This removes all invalid stations indicated in the station list with

‘a’ ‘?’ in front of the station name.

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose Prune Invalid and press

SELECT button to conﬁrm.

3. Press CHANNEL button to select yes and press SELECT button

to conﬁrm.

4.11 Set Egg timer

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose System Settings and press

SELECT button to conﬁrm.

3. Press CHANNEL button to choose Egg Timer and press SELECT

button to conﬁrm.

4. Press CHANNEL button to select increase or decrease minutes

(1-99) and press SELECT button to conﬁrm start count down.

Note: press POWER button to turn off the alarm.

Sleep options: Sleep Off | 15 | 30 | 45 | 60 | 90

1. Press and hold the INFO / MENU button to enter the menu.

2. Press CHANNEL button to choose System Settings and press

SELECT button to conﬁrm.

3. Press CHANNEL button to choose Sleep and press SELECT

button to conﬁrm.

4. Press CHANNEL button to select and press SELECT button

to conﬁrm the change of particular option, and start count

down.

4.12 Set Sleep

This function reduces the difference between the loudest and

Quietest audio being broadcast. Effectively, this makes quiet

sounds comparatively louder, and loud sounds comparatively

quieter. Options: off (default) / low / high

1. Press and hold the INFO/MENU button to enter the menu.

2. Press CHANNEL button to choose DRC and press SELECT

button to conﬁrm.

3. Press CHANNEL button to select and press SELECT button

to conﬁrm the change of particular option.

There are two alarms that can be used for the system. You can

set the alarm in the DAB mode or FM mode.

1. Press and hold the INFO / MENU button to enter the menu.

Press CHANNEL button to choose System Settings and press

SELECT button to conﬁrm.

4.13 Set Alarm

01:00

16:02

Eggtimer

Egg timer

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

Off

DRC

Low

Off

16:02

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

System Settings

Egg timer

Sleep

Alarm

Time/Date

Backlight

Language

Factory Reset

Software Version

16:02

Sleep Timer Off

16:02

Set Sleep Timer

System Settings

Egg timer

Sleep

Alarm

Time/Date

Backlight

Language

Factory Reset

Software Version

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

CANVAS2

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

DRC

System Settings

16:02

CANVAS2

2. Press CHANNEL button to choose Alarm and press SELECT

button to conﬁrm.

3. Press CHANNEL button to choose Alarm 1 or Alarm 2, and

press SELECT button to conﬁrm.

4. Now you can see a list of selection, press CHANNEL button

to choose and press SELECT button to enter the change of

particular option:

4.1 Alarm On/ Off

Press SELECT button to choose On or Off directly.

4.2 Frequency

Press CHANNEL button to choose below options and

Press SELECT button to conﬁrm.

*Daily / Weekends / Weekdays => go to 4.3 option 1

*Once => go to 4.3 Option 2

4.3 Option 1: Wake Up time

4.3.1. Press SELECT button and the Hour part will ﬂash.

Press CHANNEL button to set the hour for alarm,

press SELECT to conﬁrm.

4.3.2. The Minute part will ﬂash. Press CHANNEL button

to set the minute for alarm, press SELECT to conﬁrm.

Option 2: Date/Time

4.3.3. Press SELECT button and the Day part will ﬂash.

Press CHANNEL button to set the day for alarm,

press SELECT to conﬁrm.

4.3.4. The Month part will ﬂash. Press CHANNEL button

to set the month for alarm, press SELECT to conﬁrm

4.3.5. The Year part will ﬂash. Press CHANNEL button

to set the year for alarm, press SELECT to conﬁrm

4.3.6. The Hour part will ﬂash. Press CHANNEL button

to set the hour for alarm, press SELECT to conﬁrm

4.3.7. The Minute part will ﬂash. Press CHANNEL button

to set the minute for alarm, press SELECT to conﬁrm

4.4 Source

Press CHANNEL button to choose below options and

Press SELECT button to conﬁrm.

*Buzzer => go to 4.5

*Digital Radio / FM => go to 4.6 Preset

4.5 Duration

Press CHANNEL button to choose below options and

Press SELECT button to conﬁrm.

15 / 30 / 45 / 60 / 90 / 120 minutes

4.6 Preset (Last Listened)

Alarm

Alarm 1

Alarm 2

16:02

off 01:00 >

off 06:00 >

Alarm 1 info

Alarm

Frequency

Wake Up time

Source

Duration

Volume

16:02

off

Source

Buzzer

Digital Radio

16:02

Duration

120

16:02

Wake Up time 16:02

01:00

Frequency

Daily

Once

Weekends

Weekdays

16:02

System Settings

Egg timer

Sleep

Alarm

Time/Date

Backlight

Language

Factory Reset

Software Version

16:02

Set Time/Date 16:02

24 - 10 - 2016

16 : 02

5. Alarm ringing

When the alarm is ringing, it will enter standby mode if

the sound source you selected was Buzzer.

If the sound source you selected was DAB or FM station,

the radio will go to that station automatically.

The volume will increase gradually to reach the level you

have set.

6. Stop the alarm

You can stop the alarm by press POWER button.

The screen will show Alarm off. The radio will go to

standby mode.

7. Snooze function

You can also press SELECT button to Snooze function.

The alarm will temporarily stop, exit to standby mode

and go snooze function.

It will show the snooze time. You can set the snooze time

to 5 or 10 minutes by press SELECT button continuously

until you see the correct time.

Then the radio will temporary stop and exit to standby

mode.

When the radio start playing again, you can press the

SELECT button to stop it

4.7 Volume

Press CHANNEL button to increase or decrease the

Volume from 9 to 32 max.

4.8 After completing the settings, press INFO/MENU button

back to the System Settings. Press CHANNEL button to

choose Alarm, and press SELECT button to enter.

4.9 Now you can see the status of the Alarm 1 and Alarm 2.

It shows On or Off, and time on the left.

During the process of setting the alarm, you can press

INFO/MENU button once exit to System Settings without

Saving.

1. Press and hold the INFO/MENU button to enter the menu.

Press CHANNEL button to choose System Settings and press

SELECT button to conﬁrm.

2. Press CHANNEL button to choose Time/Date and press SELECT

button to conﬁrm.

4.14 Set Time/Date

CANVAS2

Volume

16:02

System Settings

Egg timer

Sleep

Alarm

Time/Date

Backlight

Language

Factory Reset

Software Version

16:02

CANVAS2

This radio display has a backlight with adjustable timeout (this

is the time delay, in seconds, after which the display switches off).

1. Press and hold the INFO/MENU button to enter the menu.

Press CHANNEL button to choose System Settings and press

SELECT button to conﬁrm.

2. Press CHANNEL button to choose Backlight and press SELECT

button to conﬁrm.

3. Now you can see a list of selection, press CHANNEL button

to choose and press SELECT button to enter the change of

particular option:

4.15 Set Backlight

3. Now you can see a list of selection, press CHANNEL button

to choose and press SELECT button to enter the change of

particular option:

3.1 Set time/date

3.1.1. Press SELECT button and the Day part will ﬂash.

Press CHANNEL button to set the day for alarm,

press SELECT to conﬁrm.

3.1.2. The Month part will ﬂash. Press CHANNEL button

to set the month for alarm, press SELECT to conﬁrm

3.1.3. The Year part will ﬂash. Press CHANNEL button

to set the year for alarm, press SELECT to conﬁrm

3.1.4. The Hour part will ﬂash. Press CHANNEL button

to set the hour for alarm, press SELECT to conﬁrm

3.1.5. The Minute part will ﬂash. Press CHANNEL button

to set the minute for alarm, press SELECT to conﬁrm

3.2 Auto Update

Press the CHANNEL button to choose the time update

source <from any> / <from Digital Radio> / <from FM>

/ <No update >, and press SELECT button to conﬁrm.

3.3 Set 12 / 24 Hour

Press CHANNEL button to choose <12 Hour> / <24 Hour>

for time display, and press SELECT button to conﬁrm.

3.4 Set date format

Press CHANNEL button to select <DD-MMYYYY> /

<MM-DD-YYYY> for date display format, and press

SELECT button to conﬁrm.

3.1 Timeout options:

On / 10 / 20 / 30 / 45 / 60 / 90 / 120 / 180 seconds

In Backlight menu press CHANNEL button to select a

particular options and press SELECT button to conﬁrm.

Auto Update 16:02

from Any

from Digital Radio

from FM

No Update

Set 12/24 hour 16:02

12 hour

24 hour

Set Date Format 16:02

DD-MM-YYYY

MM-DD-YYYY

Time/Date

Set Time/Date

Auto Update

Set 12/24 hour

Set Date Format

16:02

Set Time/Date 16:02

24 - 10 - 2016

16 : 02

Timeout 16:02

10 sec

20 sec

30 sec

45 sec

60 sec

90 sec

System Settings

Egg timer

Sleep

Alarm

Time/Date

Backlight

Language

Factory Reset

Software Version

Digital Radio

>Station List

Full Scan

Manual Tune

Prune Invalid

System Settings

16:02

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Goodmans Radio Handbücher

Goodmans

Goodmans GOSTR Bedienungsanleitung

Goodmans

Goodmans GMR1990DABT Bedienungsanleitung

Goodmans

Goodmans SG-789L Bedienungsanleitung

Goodmans

Goodmans GPS190 Bedienungsanleitung

Goodmans

Goodmans MICRO1112DAB Bedienungsanleitung

Goodmans

Goodmans ROCKA Bedienungsanleitung

Goodmans

Goodmans GSR1885DAB Bedienungsanleitung

Goodmans

Goodmans GCR1885DAB Bedienungsanleitung

Goodmans

Goodmans GSR1889DABBT Bedienungsanleitung

Goodmans

Goodmans Oxford BT Bedienungsanleitung

Goodmans

Goodmans GSR1889DABBT Bedienungsanleitung

Goodmans

Goodmans 347531 Bedienungsanleitung

Goodmans

Goodmans GMR1888DAB Pebble Bedienungsanleitung

Goodmans

Goodmans GDPRDAB Bedienungsanleitung

Goodmans

Goodmans GSR 1885DAB Bedienungsanleitung

Goodmans

Goodmans GMR1886DAB Bedienungsanleitung

Goodmans

Goodmans GMR1886DAB Bedienungsanleitung

Goodmans

Goodmans GDPRDABS2ST Bedienungsanleitung

Goodmans

Goodmans OXFORD Bedienungsanleitung

Goodmans

Goodmans 347531 Bedienungsanleitung

Goodmans

Goodmans 363306 Bedienungsanleitung

Goodmans

Goodmans GDPRDAB Bedienungsanleitung

Goodmans

Goodmans PEBBLE v Bedienungsanleitung

Goodmans

Goodmans GMR1886DAB Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung

PRESIDENT

PRESIDENT TEDDY R. Bedienungsanleitung