GoPro Hero 3 Helmet HERO Bedienungsanleitung

This guide covers the operation of the GoPro Hero 3+ camera with software

version 2.0

For different software versions some settings may be different.

Although it refers directly to the Black Edition of the camera it is also valid for the

White and Silver Editions, the only difference is that those have some limitations

regarding formats, frame rates, etc… but the operation is similar.

If you are not familiarize with the camera go to cards 1 & 8 first. Then go to the

cards explaining the mode you want to use, for example, for video mode go to

cards 9 & 13 to 16. Then go to card 19. With these you are ready to shot, the rest

is mostly “just in case” stuff.

For detailed information check the camera manual as well as the additional

material available on the official website:

www.gopro.com

The author does not assume any responsibility for errors incurred due to improper

use of this guide.

Card 1……… Operating the menu / External lights

Card 2……… LCD Touch BacPac

Card 3……… Connexions

Card 4……… GoPro App

Card 5……… Power

Card 6……… Wi-Fi Remote

Card 7……… Connecting Wi-Fi Remote to several cameras

Card 8……… Operation Modes

Card 9……… Video Mode

Card 10……. Photo Mode

Card 11……. Burst Photo Mode (including its settings)

Card 12……. Time-Lapse Mode (including its settings)

Card 13-16…. Video Mode Settings

Card 17……... Photo Mode Settings

Card 18……. Taking photos automatically while recording video

Card 19……. Format & Operation with micro SD cards

Card 20……. File System

Card 21……. Playback

Card 22……. Invert the recording image / Turning On the camera in a particular operation mode

Card 23……. To start recording automatically when you turn On the camera

/ Checking the software version of the camera

Card 24……. Spot Meter

Card 25……. Auto Low Light Mode / Deleting the last recorded clip or photo

Card 26……. Table: Resolution details and Frame Rates

Card 27……. Table: Recommended use for different video formats

Card 28……. Tables: Recording times on SD cards/ Sensor Areas used by the FOV formats

1 Operating the menu / External lights

Directly on the camera body or through the housing you have access to the three buttons of the

camera. With them you can control the menu.

2.- SHUTTER button: it is the

REC button (or Shutter button for

photo mode). With this button you

enter a menu page or select an

item after getting there with

POWER button. While in

SETTINGS menu, press and hold to

get back directly to Video mode.

1.- POWER button: press to turn On the

camera, press and hold to turn Off. With this

button you go through the menu pages/

items/settings (then use SHUTTER button to

enter them).

3.- WI-FI button: press once

to turn On Wi-Fi (in the last

selected mode) press twice for

direct access to the Wi-Fi

menu (see cards 4 or 6); press

and hold to turn Off.

Wi-Fi led: blinks when

Wi-Fi is On.

Power led: blinks when

recording or taking a photo.

Steady while charging the

battery.

With this button you can turn Wi-Fi On/Off even if the

camera is Off, for what? so you can turn the camera

On/Off through the Wi-Fi Remote control or the GoPro

App. The Wi-fi stays On when you turn Off the camera,

so if you have activated it, turn it Off independently from

the camera to save battery.

NOTE: WIFI CANNOT BE CONNECTED TO THE WIFI REMOTE

AND THE GOPRO APP AT THE SAME TIME.

LCD Touch BacPac

If you mount the optional Lcd Touch Screen you will not use the camera buttons except for

turning the camera On/Off. Once mounted it gives access to all camera functions.

The only physical button is ON/ OFF / PLAY. Press and hold to

turn the Lcd On/Off, not the camera. Press once to access

PLAYBACK (see card 21). Turn Off the Lcd while not in use

to save battery.

Touch on the top-left icon to

access all operation modes

and menus, as described in

card 8.

Direct access to the format

settings of the operation mode in

use (being this video, photo, burst

photo or time-lapse)

Pressing Settings gives access to Settings Menu. Follow the

corresponding card according to the adjustment you want to

make. In this guide we show how to make settings in the

camera body but the icons shown in the Lcd are similar.

3 Connexions

On the left side, where the micro SD card slot is, the camera has 2

connexions:MINI HDMI & MINI USB.

Mini HDMI: with a mini Hdmi to regular Hdmi cable you

can connect the camera to a HD television and watch

the live image and the Playback (see card 21).

Mini USB: multiple functions:

- Here you´ll connect the Mini Usb to Usb 2.0 charging cable to charge the battery in camera, card 5.

- There is an input Mini Usb to jack 3.5mm female adaptor cable to connect a microphone with that

connexion

- There is also an output Mini Usb to RCA A/V cable to connect the camera to a regular television.

Micro SD card slot.

Gopro App

The GoPro App for smart phones allows you to operate the camera via Wi-Fi and watch the live image as

well as transferring images to the phone (only certain formats).

1 – With the camera On, press Wi-Fi button twice, then press SHUTTER and then select GoPro App.

2 - Search and connect your smart phone to a Wi-Fi network called goprohero (key:goprohero).

3 - Start the GoPro App in the phone and follow the instructions that will guide you to personalize name

and key of the camera´s network. You´ll loose connexion, connect again to the network.

4 - After that process, every time you want to use the App make sure you: turn On the camera Wi-Fi and

select GoPro App + connect your smart phone to the camera´s Wi-Fi network + launch the App.

After that…:

Press here in the App:

Turns On/Off the camera.

Only works if the camera

Wi-Fi is On (even if the

camera is Off)

Press to Record/

Take a photo

Press to change operation

mode: Video / Photo / Burst

Photo / Time-Lapse

Press to watch videos and

photos in the card and transfer

then to the phone.

Press to enter the

Settings menu.

To link camera and phone for the first time:

5 Power

Also separately there is a Dual

Charger to charge 2 batteries

simultaneously connecting it to

your computer, or to the mains if

you have the Mains Adaptor.

The camera kit comes with a battery

that runs the camera recording

continuously for 100min (around 2.5h

shooting Time-Lapse and around 3.5h

in Stand By) and takes about 120min

to fully charge. To charge the battery

connect the camera to your computer

using the Usb cable, the red front led

will remain On while charging.

Separately you can buy the Mains

Adaptor to charge the battery when a

computer is not available.

There is also a Battery BacPac in case

you need to extend your recording time.

It is mounted on the back of the camera

and doubles the operation time. It needs

a special housing (that comes with the

kit) and should be charge through its

own Usb port.

Wi-Fi Remote

With the remote control you can operate the camera like you do in the camera body. It has two buttons,

like the camera, that work exactly like the ones there, and a screen that shows the same information.

SHUTTER button

POWER button: Press to turn On the remote, and if the

camera Wi-Fi is On and in Wi-fi Remote mode, the

camera will turn On too.

Charging port: connect the Usb charging cable,

as shown here, to charge the remote. To

disconnect the cable pull the small latch lever on

the back of the remote.

To link camera and remote for the first time:

1–With the camera On, press Wi-Fi button twice to enter Wi-Fi menu directly, press SHUTTER and:

Select WIFI RC →select NEW

2 –Turn On the remote pressing its POWER button. The connexion will take place in seconds.

When the remote and the camera have been connected previously the process is similar, the only difference

is that in step 1 instead of NEW you should select CURRENT.

3 –In the remote you´ll read “CONNECT TO ANOTHER”, press NO for now (see next card).

7 Connecting Wi-Fi Remote to several cameras

You can connect the remote with up to 50 cameras to operate them all simultaneously with a button.

Follow this steps:

2 - In every camera press Wi-Fi button twice to enter Wi-Fi menu directly, press SHUTTER and:

Select WIFI RC →Select NEW

2 - In the remote press and hold SHUTTER and at the same time press POWER . The remote enters

Searching Mode.

3 - Once finished, the remote remains in Searching Mode. To stop it press SHUTTER button.

4 - Like with a single camera (see previous card) the remote can simultaneously:

- Turn On/Off all cameras (POWER button)

- Activate Recording in all cameras (SHUTTER button)

- Change operation mode in all cameras (POWER button)

NOTE: the remote can not access the cameras menus and change settings. This must be done in

every camera individually.

All cameras start searching the closest remote.

1 - Turn On all cameras to be connected

In a few seconds all cameras will connect to the remote

Andere Handbücher für Hero 3 Helmet HERO

Inhaltsverzeichnis

Andere GoPro Action-Kamera Handbücher

GoPro

GoPro HERO 5 SESSION Montageanleitung

GoPro

GoPro ROCKY POINT Bedienungsanleitung

GoPro

GoPro Hero 3 Helmet HERO Bedienungsanleitung

GoPro

GoPro Hero 3 White edition Bedienungsanleitung

GoPro

GoPro Hero 2 Bedienungsanleitung

GoPro

GoPro HERO Camera Bedienungsanleitung

GoPro

GoPro HERO 7 BLACK Bedienungsanleitung

GoPro

GoPro Hero 3 Silver edition Bedienungsanleitung

GoPro

GoPro HERO7 WHITE Bedienungsanleitung

GoPro

GoPro Hero 3 Helmet HERO Einrichtungshandbuch

GoPro

GoPro Hero 3+ Black Edition Bedienungsanleitung

GoPro

GoPro Hero 4 Black Bedienungsanleitung

GoPro

GoPro Hero3plus Black Edition Bedienungsanleitung

GoPro

GoPro HD HERO2 Bedienungsanleitung

GoPro

GoPro Fusion Bedienungsanleitung

GoPro

GoPro Hero3White Bedienungsanleitung

GoPro

GoPro Hero3+ Black Edition Bedienungsanleitung

GoPro

GoPro HERO CPPM1 Bedienungsanleitung

GoPro

GoPro HERO5 Bedienungsanleitung

GoPro

GoPro HERO Camera Bedienungsanleitung

GoPro

GoPro Hero session Bedienungsanleitung

GoPro

GoPro HERO 4 SILVER Bedienungsanleitung

GoPro

GoPro HERO Camera Bedienungsanleitung

GoPro

GoPro Hero3plus Black Edition Bedienungsanleitung

Beliebte Action-Kamera Handbücher anderer Marken

Epic

Epic STC-EPC1T Bedienungsanleitung

Brinno

Brinno MAC200 DN Bedienungsanleitung

ION

ION Air Pro 2 Bedienungsanleitung

Firefly

Firefly 6s Bedienungsanleitung

Omni

Omni HERO4 Bedienungsanleitung

nedis

nedis ACAM41BK Bedienungsanleitung

MOFILY

MOFILY YOCAM Bedienungsanleitung

ZERO-X

ZERO-X ZX-10 Bedienungsanleitung

Pyle

Pyle eXpo PSCHD90 Bedienungsanleitung

Midland

Midland XTC300 Bedienungsanleitung

Movii

Movii QC-8075 Bedienungsanleitung

Action Camera

Action Camera AC32 Bedienungsanleitung

Coleman

Coleman C5WP Xtreme Bedienungsanleitung

MCM Electronics

MCM Electronics 82-19749 Bedienungsanleitung

Aim

Aim SmartyCam 3 Sport Bedienungsanleitung

Naxa

Naxa NDC-409 Bedienungsanleitung

Panasonic

Panasonic HX-A1M Bedienungsanleitung

Kodak

Kodak Pixpro SP1 Bedienungsanleitung