GoPro Volta Bedienungsanleitung

Volta

BATTERY GRIP / TRIPOD / REMOTE

USER GUIDE

The Basics

The First Step

You may need to upgrade your camera’s software before you can use

Volta. For step-by-step instructions, go to GoPro.com/update.

1. Camera Mounting Fingers

2. LED Battery/Camera

Status Indicators

3. Bluetooth® Button

4. Flip-Out Mounting Fingers

5. Mode Button

6. Tripod Legs

7. 1/4-20 Mount

8. Camera Cable

9. Battery Status Button

10. Shutter Button

11. USB Charging Port

(Under Port Cover)

12. Lanyard Attachment Point

USB Pass-Through Door

Lets you plug your GoPro

into Volta while keeping it

weather resistant.

Thumb Screw

Secures your

GoPro to Volta.

Volta (Battery Grip/Tripod/Remote)

Charging

Flip open the USB charging port cover.

Insert the included USB cable into the port. Connect the other end of the cable

to a computer or other USB power source.

CAUTION: Be sure the USB-C port is dry before inserting the cable.

Press the Battery Status (Battery icon) button to check the charge status.

TECH SPECS

Battery capacity: 4900 mAh

Power output: 5Vdc/2.4A (12W max)

Charge time: 3 hours

A fully charged Volta will triple a fully charged camera’s normal battery life

Heads Up: Be sure that the computer is connected to a power source.

Try using a dierent USB port if the battery charge indicator shows that Volta

is not charging.

Mounting Your GoPro

INSTALLING THE USB PASSTHROUGH DOOR

Replace your camera’s standard door with the included USB Pass-Through Door.

1. Unlock the latch and ﬂip the door open.

2. With the door in the horizontal position, gently pull outward until the door

snaps o.

3. Line the USB Pass-Through Door up with the small silver bar.

4. Press the door tightly into the small silver bar until it snaps into place and is

securely attached.

WARNING: The USB Pass-Through Door will protect against

rain and snow, but is not waterproof. Using it underwater with

your GoPro will damage your camera and void the warranty.

Mounting Your GoPro

ATTACHING YOUR CAMERA

1. Mount your GoPro to Volta using the top mounting ﬁngers.

Heads Up: Be sure to insert your camera into the mounting ﬁngers with the

USB Pass-Through Door on the side opposite the Thumb Screw. This will

prevent the Thumb Screw from blocking the USB port. Rotate the mounting

ﬁngers if needed before mounting your camera.

2. Plug Volta’s USB cable into your camera.

Your camera will start charging as soon as it’s plugged in.

Using Volta to Control Your GoPro

WIRED CONTROL

Volta’s integrated camera buttons gives you easy one-hand control of your GoPro.

1. Press the Battery (Battery icon) button to wake Volta.

2. Press Voltas’ Mode button to turn you GoPro on.

3. Press Volta’s Mode button repeatedly to cycle to the mode that you want.

4. Press Volta’s Shutter button to start capturing.

5. To stop capturing video or time lapse, press Volta’s Shutter button again.

WIRELESS CONTROL

Use Bluetooth to turn Volta into a wireless remote. Simply detach your GoPro from

Volta and follow these setup instructions:

1. On your camera, complete these steps:

a. From the rear screen, swipe down to access the Dashboard.

b. Swipe left, and then tap Connections > Connect Device > Volta.

2. Press the Bluetooth (Bluetooth icon) button on Volta. Your camera will

automatically begin pairing.

After pairing, Volta and your camera will automatically connect when they are

both on.

Heads Up: Volta can only connect to one camera at a time.

PRO TIP: After detaching your GoPro, plug Volta’s USB cable into the charging

port to keep it out of the way.

WARNING: Volta is not weather resistant when used as a

wireless remote or any time the USB-C cable is disconnected

from your camera.

Tripod

Flip out the built-in tripod legs any time

you need to set Volta down to capture

stationary shots. You can swivel or tilt

your camera to adjust the capture angle.

PRO TIP: Volta’s additional battery

power and tripod legs make it great for

capturing extra-long time lapse shots.

Mounting Volta

RETRACTABLE MOUNTING FINGERS

Volta’s retractable mounting ﬁngers

make it easy to attach Volta to GoPro

backpack straps, Chesty and other

mounts.

1/420 MOUNT

Volta has 1/4-20 mount built into its

base for added mounting ﬂexibility.

LANYARD

Use the hole in Volta’s base to secure

the included wrist lanyard.

Using Volta with Media Mod

Insert your GoPro into Media Mod as you normally would and follow these steps:

1. Use your camera’s mounting ﬁngers to attach your GoPro to Volta

2. Plug Volta’s USB-C cable into the USB-C port on the back of your Media Mod.

Heads Up: To use Volta’s built-in camera controls with your GoPro and Media

Mod, connect Volta to your camera with Bluetooth.

WARNING: Volta is not weather resistant when used with

Media Mod.

Resetting Volta

Press and hold the Mode and Shutter buttons simultaneously for

8 seconds if you need to reset Volta.

Notes

Here are a few important things to keep in mind while you’re using Volta:

•Volta’s camera mounting ﬁngers swivel. Rotate your GoPro in either

direction to line up the Volta’s camera buttons for right-handed or left-

handed control.

•Volta will sleep if the camera controls are not used for a prolonged period.

Tap the Battery (Battery icon) button to wake it up.

•Your camera cannot be connected to Volta and the Quik app at the same

time. Turn o your Volta’s Bluetooth to connect your camera to the app or

disconnect the app to connect Volta.

•QuikCapture is not available using Volta’s Shutter button. Use the

camera’s Shutter button to start QuikCapture.

WARNING: Volta is not waterproof. Using it underwater with

your GoPro will damage your camera and void the warranty.

Regulatory Information

To see additional information regarding country certiﬁcations, refer to the

Important Product + Safety Instructions included with your remote.

The Bluetooth word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc., and any use of such marks is under license.

Your VOLTA was designed to recognize when it’s at risk of overheating

and will stop working when needed. Simply let it sit and cool before using

it again.

The operating ambient temperature range of your VOLTA is 14° F ~ 95° F

(-10° C ~ 35° C), and the charging temp range is 32° F ~ 95° F (0° C ~ 35°

C).

XXXXXXXXXXX REVA

Visit gopro.com for more information

Andere Handbücher für Volta

Inhaltsverzeichnis

Andere GoPro Kamerazubehör Handbücher

GoPro

GoPro HERO Camera Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro Wi-Fi Remote Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro Wi-Fi Remote Bedienungsanleitung

GoPro

GoPro Z-ONE PRO Bedienungsanleitung

GoPro

GoPro LCD Touch BacPac Bedienungsanleitung

GoPro

GoPro Volta Bedienungsanleitung

GoPro

GoPro Omni Bedienungsanleitung

GoPro

GoPro Volta Bedienungsanleitung

GoPro

GoPro ADDIV-001 Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro HERO Camera Bedienungsanleitung

GoPro

GoPro Wi-Fi Remote Bedienungsanleitung

GoPro

GoPro Sportsman Mount Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro 3D Hero SyStem Bedienungsanleitung

GoPro

GoPro Zeus Mini Bedienungsanleitung

GoPro

GoPro Light Mod Bedienungsanleitung

GoPro

GoPro Wi-Fi Remote Abmessungen und Installationsanleitung

GoPro

GoPro Smart Remote Bedienungsanleitung

GoPro

GoPro LCD BacPac Bedienungsanleitung

GoPro

GoPro Smart Remote Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung