Gotie GNA-260 Bedienungsanleitung

GNA-260

INSTRUCTION MANUAL

SPECIFICATION

Power supply: 220-240V 50/60Hz

Heating power: 80W

Humidify power: 30W

Total power: 110W

Water tank capacity: 6L

Evaporation Rate: ≥300ml/H

Noise level: ≤35dB(A)

ELEMENTS

Pictures are for reference only

1. Nozzle

4. Base

A. Filter

2. LCD display

5. Front panel

B. Filler

3. Water tank

6. Aroma box

PRODUCTS FEATURES

Large humidifying capacity

Cool and warm mist function

Plasma function

Microprocessor control

Touch-sensitive buttons

LCD display

Remote controller

Automatic humidity control

Aromatherapy

Wired humidity sensor and thermometer

12-hour timer

3 humidification levels

Night mode

Softlight illumination

Automatic power-off when empty

Ion exchange resin filter

Noiseless operation

WORKING PRINCIPLE

Ultrasonic Humidifier uses the ultrasonic high-frequency oscillator to break

up water into tiny water particles with the diameter of about 1-5 µm.The

ventilation system blows out this water into the dry air where they evaporate

to give the required humidity. The clearly visible smooth and even fog can

be seen out of the unit.

SAFETY NOTES

1. Never disassemble the base unit without consulting qualified

personnel.

2. If the supply cord is damaged, it must be replaced by the

manufacture in order to avoid a hazard.

3. Do not add detergents or chemical solutions into the unit.

4. Unplug appliance during filling, cleaning and maintenance.

5. Keep detergents and chemical solutions away from children.

6. If any abnormal smell appears during normal operation, please

switch off and disconnect power supply and have qualified

personnel amend.

7. Never touch water in the water basin or components in the water

when the unit is working.

8. Never switch on when there is no water in the water basin.

9. Never scrape transducer with sharp tools.

10. Never clean transducer with agressive detergents or chemical

solutions.

11. Never let water splash into inner base unit to avoid components

damage.

12. Care should be taken when using the appliance due to emission of

hot water vapor.

13. Before cleaning and maintenance, the appliance must be

disconnected from the power supply.

14. This appliance can be used by children aged from 8 years and

above if they have been given supervision or instruction concerning

use of the appliance in a safe way and if they understand the

hazards involved. Cleaning and user maintenance shall not be

made by children unless they are older than 8 and supervised. Keep

the appliance and its cord out of reach of children aged less than 8

years. Cleaning andusermaintenance shall not be madeby children

without supervision.

15. Children should be supervised to ensure that they do not play with

the appliance.

16. Indoor use only.

17. Check the voltage carefully to ensure your home power voltage fits

the product.

18. Take out the plug with hand instead of dragging the wire.

19. Do not use the product in wet environment, such as a bathhouse

and a bathroom, as it can cause electric shock and fire.

20. Do not put any appliances on the product.

21. Do not clean your machine when it is on or just after swithing off as

hot water or elements can hurt you.

22. Remove the water tank before moving the device.

23. Do not use the machine exposing to sunshine or close to the heater

24. Do not touch the plug or wire with wet hands to avoid electric shock.

25. Do not touch the warm mist, especially warm.

26. Keep the machine out of reach of children.

SAVE THESE INSTRUCTIONS!

IMPORTANT

1. The working environment for humidifier is when temperature is

between 5 to 40 degreesCelsius, and relative humidity is lower than

80%RH.

2. Use clean water with temperature lower than 40°C (distilled water is

recommended).

3. Clean water tank and water filter when using again after a long time.

4. Soak the water filter for 24 hours before first use.

FUNCTION DESCRIPTION

Relative Humidity

1. The percentage of water mist in a given space with a given air

temperature is named as relative humidity, usually marked as %RH,

i.e. 45%RH.The air contains water mist moreor less. Theproportion

of water mist tothe air varies according to different airtemperatures.

The higher the temperature, the more water mist inhaled in the air.

2. In the winter, the cold air outside enters the room and becomes

warmer by the higher temperature in the room. As a result, the

relative humidity decreases. If you want to keep the healthy

environmental humidity, we need to increase the mist volume in the

air. The humidifier can do that for us.

3. Relative humidity in different environments suitable for people:

oBedroom, living room: 45-64%RH

oPatient’s room: 40-55RH

oRoom with computer, experiment equipments: 45-60%RH

oRoom with piano: 40-60%RH

oMuseum, exhibition hall, and library: 40-50%RH

Water filter:

1. Cation exchange resin filter soften the hard water.

2. Cation exchange resin filter demineralize the water.

OPERATION PROCEDURE

1. Put the machine on a flat surface and take off the cover.

2. Lift the water tank, turn upside down and unscrew the water filter.

3. Fill the water into the water tank by the filler located on the bottom

of the tank.

4. After pouringthe water, screwthe cap withthe filter tightly and place

tank on the base of the device. Part of the water overflows from the

water tank into the water container in the device base.

5. Put the cover on water tank.

6. Check if the rated voltage meets the input voltage and plug into the

socket. Display shows the symbol POWER .

7. Touch the symbol POWER on the machine; the background

LED light will be on. The machine will begin to work in AUTO mode.

Display shows AUTO symbol and shows current humidity and

current temperature alternately in 30 seconds. After 15 seconds

without any operation, the display will become dim, touch any key

except power key to wake up the display.

In Auto mode, the device determines the optimal humidity

according to current temperature and starts to achieve it at

maximum power. When the current humidity is lower than the

humidity showed in the table, it is in high speed operation. When

the humidity is reached,the machine will be in lowspeed operation.

The device checks the accordance of the temperature level and the

humidity level every 1 minute.

Air temperature (°C)

Humidity (%)

≤19

37 and more

8. Timer setting: There are 12 timer settings. Touch the symbol

TIME , the LED display will show the desired setting timer.

Touch till “--:--” display on the LED, timer setting is cancelled. The

timer shows the rest operation time and decreases by 1 minute, i.e.,

if the timer is set at 12 hours, LED display shows 11:30 after 30

minutes. To know what time have been set, just to touch any key

except power key to wake up the display and then touch TIMER

symbol. Touch again, to set timer again.

There is a shortcut for timer setting. Touching the symbol

TIMER is to increase timer, meanwhile touching symbol

MAX/MIN can reduce timer.

9. Touch the symbol MAX / MIN , AUTOmode is cancelled and the

mist output is in the first speed. You may select 3 desired levels of

mist volume. The corresponding mist output symbol

shows on the display with different running speed.

In mist output level 1, the is running in low speed,

level 2 is running in middle speed, level 3 is running in high speed.

Touch the symbol again, to choose AUTO mode.

10. Constant humidity: Before you touch the symbol HUMIDITY ,

LED display shows the current humidity. You may set the humidity

arranged from 40%RH to 75%RH. Touch once, it will increase by

5%RH. When it reaches 75%RH, touch again, it will show “Co” and

flash for 3 seconds to exit humidity setting function and back to Auto

mode. After you set the expected humidity, the display shows the

symbol , the machine will keep the memory and confirm after 5

seconds. 5 seconds later, the symbol %RH will blink and LED

display shows the current humidity. Touch again, it shows the

expected humidity setting. If the expected humidity is less than the

current humidity, the machine will be in sleeping state. But if the

expected humidity is 3% higher than the current humidity, the

humidify function will work. Mist output speed cannot be setting

during the constant humidity model.

There is a shortcut for humidity setting. Touching the symbol

HUMIDITY is to increase humidity, meanwhile touching symbol

MAX / MIN can reduce humidity.

11. First touch the symbol DEGERMING , the warm mist will come

out after 10~15 minutes. On the LED display, it shows the Heating

symbol . Second touch, the Plasma generator works as well.

On the LED display, it shows both the Plasma symbol and

Heating symbol . Third touch, Heating function will off. Fourth

touch to stop both functions.

12. Touch the symbol LIGHT , the brightness of blue decoration

light in the bottom and the water tank indication light dimmed.Touch

again, become dimmer. Touch 3rd time, will be turned off.

13. Long press the symbol for 2 seconds, it enters to night mode.

Blue decoration light in the bottom and the water tank indication

light are off, LED display turns off, leaving the symbol on the

display only. After 5 seconds without any operation, the symbol will

become dim, press any key except power key to wake up the

display. Then long press symbol again to stop the function.

14. Auto Shut-Off: When the water tank is empty, the machine will

automatically stop working. LED shows the shape of lack of water

. Refill the water, and the machine will restart. If you don’t refill

water within 15 minutes, the machine will automatically power off.

15. On the remote controller, the related symbol controls the

corresponding function.

16. Regardless of the working mode, if there is no operation in about

15 seconds, the display will turn dim.

17. Aroma function:

a) Take out aroma box

b) Use water-soluble aroma oil to drop into the sponge

c) Put the aroma box back into the machine, the aroma function

will be on automatically

d) To stop the aroma function or when the machine is not in use

for a long time, take out the sponge in the aroma box and clear

it, then put it back to the machine.

CLEANING

Before cleaning, disconnect the plug!

1) Transducer

The water in some places is hard and the transducer surface will

be covered by a limescale. You need to clean transducer with

cleaning agent.

Add a little of cleaning agent or a vinegar on the transducer

surface, then infuse water into the sink to soak the sink fully for 10-

15 min.

Clean with soft brush or cloth until limescale is gone.

Flush twice with clean water.

Do not clean transducer by any sharp material or scrape it to avoid

any damage

2) Water tank

Remove the cover from the water tank.

Lift the water tank from the base of the device.

Turn the tank upside down and unscrew the screw cap.

Pour water into the tank with a small amount of dishwashing liquid.

After pouring water, screw the cap tightly and shake the tank,

holding it with both hands.

Unscrew the bottle cap and pour the water out of the container and

then rinse it thoroughly.

Don't put acid, alkalescency, blencher scour into water tank to

avoid damage

3) Water sink –limescale

Take out the water in sink, Clean the scale by brush, then wipe by

a damp cloth. Flush it with water.

4) Water filter

Soak the water filter for 24 hours in a solution of water and vinegar.

PROBLEM SOLUTION

If the machine doses not work appropriately, please check as following

before turn to maintenance service.

Problem

Possible reasons

Solutions

No steam

Unplugged

Plug into socket

Limescale on the

transducer

Clean the transducer

No water in tank

Add water

Water is dirty or stood

too long in the tank

Clean the water tank, pour

fresh water

Unpleasant smell

of mist

New machine

Take off the tank and place it in

cool and dry place for 12 hours

Water is dirty or stood

too long in the tank

Clean the water tank, pour

fresh water

Inhaltsverzeichnis

Sprachen:

Andere Gotie Luftbefeuchter Handbücher

Gotie

Gotie GNA-351 Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken

Boneco

Boneco H300 Bedienungsanleitung

Bionaire

Bionaire CM1 Handbuch

Air-O-Swiss

Air-O-Swiss AOS 7131 Handbuch

KING

KING K 5002 Rainbow Bedienungsanleitung

Crane

Crane EE-6902 Bedienungsanleitung

Glaziar

Glaziar Ness Bedienungsanleitung

Philips

Philips DreamStation Go Abmessungen

Honeywell

Honeywell MISTMATE HUL520BC Bedienungsanleitung

Stadler Form

Stadler Form Hera Bedienungsanleitung

Hunter

Hunter 31206 Bedienungsanleitung

TaoTronics

TaoTronics TT-AH004 Bedienungsanleitung

adorini

adorini Cigar Heaven Bedienungsanleitung

Lanaform

Lanaform Aroma Bedienungsanleitung

Aprilaire

Aprilaire 800 Series Bedienungsanleitung

Pyle

Pyle SereneLife PHUMDIF8 Bedienungsanleitung

Trotec

Trotec B 200 Bedienungsanleitung

Pure Humidifier

Pure Humidifier EC Series Bedienungsanleitung

Crane

Crane EE-864 Bedienungsanleitung