G+M Elektronik GM-1525-AM Bedienungsanleitung

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Deutsch English

Page 1 | 23 Operating instruction 1706.003

GM-1525-AM

Internet radio with FM / RDS / DAB / DAB+, USB and AUX Input, RS232

Control via UNDOK App for Android and iOS

Front plate

Rear plate

Supplements:

1 x FM Throw antenna 1 x 2.4G Antenna

1 x Audio wire (Cinch-Cinch) 1 x Remote Controller

2 x AC Power Cord (EU / CH)

External Resources:

To operate unit, following external resources are needed:

• A power source (AC 230 V mains supply)

• A wired (Ethernet) or wireless (Wi-Fi) network (provided through a router) with appropriate permissions and password

if necessary (for Internet radio and Network Music player modes)

• Broadband Internet access for Internet radio mode

• A music library stored on the network or on a USB mass storage device

• An external audio source (for Aux in mode)

Connectors:

• Ethernet RJ45

• FM Antenna

• USB in

• AUX in

• Line out

• Headphones out

• RS232

Features:

• Internet Radio with access to over 20'000 stations, «Listen again» broadcasts and podcasts

• Music player allowing easy navigation and playback through a USB or network-stored library of music ﬁles including

AAC / AAC+, MP3, WMA, WAV

• «Play To» feature allowing media to be pushed from a PC running Windows 7 to the unit operating in Digital Media

Renderer (DMR) mode

• DAB / DAB+ digital radio with a wide choice of channels and digital quality sound broadcast

• FM with RDS (Radio Data System)

• AUX in for external music sources such as MP3 players

• Large 2.7 inch display for easy control and clear information display, with up to six lines of text plus status icons

• Infrared remote control

• Clock with auto-update capability and dual independent alarms

• Sleep / snooze

• Multiple network proﬁles for easy setup

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 2 | 23 Operating instruction 1706.003

1. Controls, connectors and display

Main controls:

Index

Button Function

CONTROL SELECT Turn to scroll through a menu of station list. The chosen option is highlighted in reverse text (dark

characters on a white background) Press to select.

STANDBY Turn on or back to standby mode (showing clock and date). Cancels sleep function

SLEEP Sleep/snooze: When playing, standby after a set time. When alarm is sounding, snooze for a set time

ALARM Enters alarm wizard, turns off alarm (when alarm is sounding) and toggles between alarms in standby

MENU Menu: Show menu for the current mode. Press again to show now playing screen

MODE Cycle through the modes: Internet Radio, Music player, DAB, FM, AUX in

MUTE Mute audio output

MAIN VOLUME Increase or decrease volume level

PRESET Press for the preset recall / Save menu; Scroll up / down to select the preset number then press

'Select' to conﬁrm. There are 10 presets each for Internet radio, DAB and FM

INFO View more information about the station or track playing. Press again to cycle through further

information screens then return to the normal Now playing screen

7Previous: Select start of track, previous track or hold to scan down rewind

8Next: Select next track or hold to scan up / fast forward

1 2 3 Play / Pause / Stop

REPEAT Music player repeat songs

SHUFFLE Music player shufﬂe songs

1. Controls, connectors and display 2

2. Screens 4

3. Getting started / setup 6

4. Internet radio mode 11

5. Music player mode (Network and USB) 14

6. Using the «Play To» feature in Windows 7 17

to stream media

7. DAB Radio Mode 18

8. FM Radio mode 19

9. AUX In mode 20

10. Alarms and sleep 20

11. Factory reset 21

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 3 | 23 Operating instruction 1706.003

1.1. Remote control

The remote control operates in a similar way to the main keypad.

Button Function

Standby: Turn on or back to standby mode (showing clock and date). Cancel sleep function.

SLEEP Sleep / snooze: When playing, standby after a set time. When alarm is sounding, snooze for a set time

ALARM Enters alarm wizard, turns off alarm (when alarm is sounding) and toggles between alarms in standby

MODE Mode: Cycle through the modes: Internet Radio, Music player, DAB, FM, AUX in

1Set / Recall preset 1 or 6

2Set / Recall preset 2 or 7

3Set / Recall preset 3 or 8

PRESET Preset: Press for the Preset recall/Save menu; Scroll up / down to select the preset number then press

'Select' to conﬁrm. There are 10 presets each for Internet radio, DAB and FM

4Set / Recall preset 4 or 9

5Set / Recall preset 5 or 10

SHIFT Press Shift then Preset to access higher preset numbers

MENU Show menu for the current mode. Press again to show Now playing screen

Up: Scroll up through a menu or station list

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 4 | 23 Operating instruction 1706.003

Button Function

INFO Info: View more information about the station or track playing. Press again to cycle through further

information screens then return to the normal Now playing screen.

Back

Repeat Music player repeat song

Down: Scroll down through a menu or station list

SHUFFLE Music player shufﬂe songs

Play / Pause / Stop

VOLUME – Decrease volume

VOLUME + Increase volume

Mute Mute

Previous: Skip back (previous track)

Rewind

Fast forward

Next: Skip forward (next track)

•1

•7

•6

•5

•8

•1

• 12 / 3

2. Screens

The screen shows various menus, dialogues and displays, as described below. There are basically six types of screen:

• Standby (clock)

• Splash (mode)

• Now playing

• Dialogue

• Error / Information

• Menu

When text is too long to ﬁt on the screen, it is ﬁrst shown truncated, then, after

a few seconds, slowly scrolls so that you can read it all.

The standby screen shows the time, date and any active alarm times.

As you cycle through the play modes using MODE, the unit shows a splash

screen for each mode. After one second, the unit enters the selected mode

and tries to start playing the last station or track that was playing in that mode.

If this is not possible, the unit tries to connect to the selected source by scan-

ning for stations, networks, or prompting for user input as appropriate.

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 5 | 23 Operating instruction 1706.003

Now playing screens show information about the audio source and track

now playing, where available.

Dialogue screens are shown to allow the user to change settings. They vary

in complexity from simple Yes / No options up to the scrollable network

password input screen.

As with menus, the selected item is shown with a white background.

Dialogue screens mark the current setting with an asterisk (*).

Error / Information screens give speciﬁc messages for a few seconds, then

change automatically to another screen.

Menus:

The unit has basically three types of menu. Use the SELECT control to step

through and select options. A scroll bar on the right of the screen shows if

there are further options above or below those visible.

Each mode has a Mode menu, with options speciﬁc to that mode. For examp-

le, the FM mode menu has just two options: Scan setting and audio setting.

In addition, each mode menu has two ﬁnal options: System settings > and

Main menu >. The '>' indicates options leading to further menus.

The System settings menu allows access to system settings and information

such as network, time, language and software update.

Menus with more options than will ﬁt on one screen have a scroll bar to the

right.

The Main menu allows access to all modes plus sleep and timer functions.

Some menus, for example the System settings menu, have several sub-

menus. A menu map of the unit is shown on the last page of this manual book.

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 6 | 23 Operating instruction 1706.003

3. Getting started / setup

To set up the unit:

1. Place the unit on a suitable shelf or table

2. Connect the power adaptor between the unit and the mains supply

3. Getting started / setup

3.1. Setup wizard

When the unit is started for the ﬁrst time, it runs through a setup wizard to con-

ﬁgure settings for date/time and network. Once this has ﬁnished, the system is

ready to use in most modes.

Note: To change these settings later, select Menu > System settings >. To

run the setup wizard again, select Menu > System settings > Setup wizard.

Select Yes to start the setup wizard.

If you choose No, the next screen asks if you would like to run the wizard next

time the unit is started. The system then starts without conﬁguring time / date

and network settings and enters the Main Menu.

Note: If power is removed while the wizard is in progress, the wizard will run

again next time when the unit is started.

3.1.1. 12 / 24 hour display

To change between 12 and 24 hour display, select set 12 / 24 hour and then

select your preference.

3.1.2. Time / Date

The time and date can be updated manually or automatically. With auto-up-

date, the time and date are automatically synchronized with external clocks.

Auto-update is generally more accurate.

Auto-update works with data sent over DAB, FM or the Internet. The clock is

only updated when in a corresponding mode, so it is best to select a mode

you use regularly.

DAB and FM use time signals broadcast with radio transmissions. Network

uses a time signal sent from the Frontier Silicon Internet radio portal when in

any network- connected mode.

1. Select Update from DAB, Update from FM, Update from Network or No

update.

2. If you are updating from the network, set your time zone.

3. If your country uses daylight saving, the automatically updated time from

the network may be wrong by one hour. When daylight savings are in effect

(during the winter), turn on the Daylight savings option to rectify this.

Note that if you are updating the time from DAB or FM, the Daylight savings

option has no effect on the clock’s time. The unit will auto-update from the

selected source when time information is available.

WELCOME

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 7 | 23 Operating instruction 1706.003

Manual set:

If you set No update, the wizard now prompts you to set the time and date

manually. The date and time are displayed as dd-mm-yyyy and hh:mm AM /PM

with the ﬁrst value, dd, active ﬂashing.

Adjust each value with the Select control. As each value is set, the next value

becomes active and ﬂashes.

3.1.3. Network

If you don’t want to use the network, you can skip this part with pressing the

Mode button.

The unit is compatible with all common network protocols and encryption me-

thods, including Wi-Fi Protected Setup (WPS).

To connect the unit to your network, you need one of the following:

• A wired router and an Ethernet (RJ45 network) cable

• A Wi-Fi wireless router, together with password key if set

Select WLAN region / country > Wi-Fi network (SSID), and then select a

network from the list.

To connect to a wired network, select [Wired], after ensuring that the Ethernet

cable from the wired router is connected to the Ethernet socket of the unit.

If the network is open (non-encrypted), the unit connects without any further

ado; see completion below.

Standard encrypted network:

To enter the network’s key (password), use the Select control to move the

cursor through the characters and select. As each character is selected, the

key is built up near the top of the display.

There are three options accessible by turning Select back before the ﬁrst cha-

racters (0123 …) – Backspace, OK and Cancel.

WPS encrypted network:

WPS encrypted networks are identiﬁed by [WPS] at the start of the network

name, and have three methods of connection. Select one and follow the

prompts:

• Push Button

The unit prompts you to press the connect button on the router. It the scans

for a ready push button connect network and connects.

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 8 | 23 Operating instruction 1706.003

• Pin > (code number)

The unit generates an 8-digit code number which you enter into the wirel-

ess router, access point, or an external registrar (e.g. advanced versions of

Windows Vista).

• Skip WPS >

Enter key as for a standard encrypted network, above. For more information

on setting up a WPS encrypted network, see your WPS router’s instructions.

Completion:

The unit tries to connect to the selected network.

If connecting fails, the unit returns to a previous screen to try again.

If the network connection is lost, the unit automatically tries to reconnect.

3.2. Common settings

3.2.1. Equaliser

Several preset EQ modes are available; also a user-deﬁned setting.

To adjust the EQ, select Menu > System settings > Equaliser. You can then

choose from a variety of preset modes or create your own, with custom bass,

treble and loudness settings.

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 9 | 23 Operating instruction 1706.003

3.2.2. Network

The unit remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one

of them it can ﬁnd.

You can see the list of registered networks through Menu > System settings > Network > Network proﬁle >. From here

you can delete unwanted networks by turning and pressing Select, conﬁrming with Yes.

There are also other options for viewing and manually altering network settings from Menu > System settings > Network

>(for example setting up a wired network). Users experienced with networking may ﬁnd these options useful for diagnosing

and ﬁxing network problems.

3.2.3. Language

The default language is English. To change, select Menu > System settings > Language > then select your language.

(Language selection: English / German / Italian / French / Spanish)

3.3. Setting up a music server

In order for the unit to play music ﬁles from a computer, the computer must be set up to share ﬁles or media.

UPnP media sharing allows devices to play music from a shared media library, navigating through tag menus such as Artist,

Album or Genre. If you are running a suitable server system such as a PC with Windows Media Player 10 or later (WMP), and

your music library is well-tagged, then it is recommended to use media sharing. Only the UPnP server needs to be set up.

3.4. Sharing media with Windows Media Player

The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP platforms and servers may

be used. To set up WMP for media sharing, perform the following steps:

1. Ensure that the PC is connected to the network

2. Ensure that the radio is powered on and connected to the same network

3. In WMP, add to the media library the audio ﬁles and folders you want to share with the unit (Library > Add to Library …)

4. In WMP, enable media sharing (Library > Media sharing …)

Make sure that the radio has access to the shared media by selecting it and clicking Allow. You can also set a name for the

shared media in Settings… Click OK to close the dialogue boxes.

The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the background; there is no need to

start WMP explicitly.

gm-elektronik.swiss | adm@gm-elektronik.swiss

GM-1525-AM

Page 10 | 23 Operating instruction 1706.003

3.5. Setting up the Unit for «Play To» Windows 7 streaming media feature.

To set-up the unit to be controlled and to stream music via Windows Media Player 12 (Windows 7 only), perform the following

steps:

1. Ensure that the PC is connected to the network

2. Ensure that the unit is powered on and connected to the same network. Note: the unit must be in an Internet radio mode

to be detected

3. From the Windows 7 main screen, select Start > Devices and Printers

4. Select the Add a device tab in the top left of the Devices and Printers window and follow the instruction prompts given

by the wizard.

In the Devices and Printers window a Jupiter 6 icon will appear and you are now ready to stream your Windows media

music ﬁles to the unit.

Inhaltsverzeichnis

Andere G+M Elektronik Radio Handbücher

G+M Elektronik

G+M Elektronik GM-1525-B Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung