Graco True Airless ProLTS 190 Bedienungsanleitung

3A3093A

Kit Instructions

190, 210, 290, 390 Fan Replacement Kit

Pressure Relief Procedure

1. Turn ON/OFF switch to OFF position.

2. Unplug sprayer.

3. Engage trigger lock.

4. Turn prime/spray knob (A) down to the

PRIME/DRAIN position.

Hold metal part of gun firmly to a grounded metal pail.

Pull gun trigger to relieve pressure.

Disassembly

1. Remove the two machine screws (12) that secure the

motor shield (23), save the screws.

2. Slide motor shield (23) off the motor and set aside.

3. Pry fan retainer (54b) off the motor shaft with a small

screwdriver.

4. Remove and discard old retainer(54b), washer (54c),

fan, and shaft adapter (54d). Shaft adapter Type A

requires a 5/64” hex key to loosen the setscrew.

IMPORTANT SAFETY INSTRUCTIONS

For detailed sprayer information and warnings,

see the Owners manual included with your

sprayer.

SKIN INJECTION HAZARD: This sprayer is capable of

producing 3000 psi (21 MPa, 207 bar) during use. Fol-

low this Pressure Relief Procedure whenever you

stop spraying and before cleaning, checking, servicing,

or transporting equipment to prevent serious injury.

To help prevent injection injuries, follow this procedure

when you stop spraying and before you service or

clean the sprayer, remove parts, or repair leaks.

ti26466a

ti26467a

54b

(Type A)

54b

(Type B)

54b

54c

54d

(Type B)

54d

(Type A)

ti26468a

WARNING

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents.

Original instructions. This manual contains English. MM 3A3093

Graco Headquarters: Minneapolis, International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

www.graco.com Revision A - May 2015

Assembly

1. Install shaft adapter (54d) on to the motor shaft.

2. Rotate fan clockwise while sliding fan onto shaft

adapter (54d) with the fins facing the motor. Slide

wave washer (54c) onto motor shaft.

3. Place a push nut (54b) on a 3/8” or 10mm socket.

4. Position the push nut and socket at the end of the

motor shaft. Use a small or light (8 oz./225g) hammer

to drive the push nut onto the shaft compressing the

wave washer.

5. Slide motor shield (23) over the motor.

6. Secure the motor shield (23) using the two machine

screws (12) removed earlier. Torque to 23–27 in-lb

(2.6–3.1 N•m)

54d

ti26469a

54c

ti26470a

ti26471a

ti26472a

54c

ti26479a

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Graco Spritzpistole Handbücher

Graco

Graco 3A0149C Datenblatt

Graco

Graco H.E.L.P. 1600B Bedienungsanleitung

Graco

Graco 16U277 Bedienungsanleitung

Graco

Graco Express 3900 Bedienungsanleitung

Graco

Graco GMx 7900 Bedienungsanleitung

Graco

Graco LineLazert III 3900 Bedienungsanleitung

Graco

Graco ProShot 258865 Bedienungsanleitung

Graco

Graco 237-425 Bedienungsanleitung

Graco

Graco 243012 Bedienungsanleitung

Graco

Graco 257096 Bedienungsanleitung

Graco

Graco 231409 Bedienungsanleitung

Graco

Graco GM 3000 Bedienungsanleitung

Graco

Graco 190ES 261825 Betriebsanleitung

Graco

Graco e-Xtreme Driver Bedienungsanleitung

Graco

Graco Merkur G15W Series Stücklistenhandbuch

Graco

Graco 309410 Kurzanleitung

Graco

Graco 907-292 Bedienungsanleitung

Graco

Graco RTX 1500 Gebrauchs- und Pflegehandbuch

Graco

Graco Fusion CS20F1 Stücklistenhandbuch

Graco

Graco XM PFP Gebrauchs- und Pflegehandbuch

Graco

Graco EDGE 257827 Bedienungsanleitung

Graco

Graco Magnum Pro Plus Leitfaden

Graco

Graco PRO 309292S Bedienungsanleitung

Graco

Graco Ultra 333 231-007 Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

WAGNER

WAGNER W 125 Bedienungsanleitung

My Clean Buddy

My Clean Buddy PW018 Bedienungsanleitung