Grandview Ultimate PP-G Series Bedienungsanleitung

Model: PP-Gxx(R1)

Utimate Fixed Frame

Screen Manual

②

Maintainance:

In order to maintain the screen, please retract fully

the screen when it is not used. Before retraction,

pleasecheck the front and rear side of screen

fabric and makesure there is no apparent dirt,

insects, or something else might affect the fabric

material. If there aresundries or dirty, please use

soft brush or cloth to cleanit off.

Clean the screen material:

Please mix warm water with soft detergent to ruboff

the dirt on casing or fabric material. Afterrubbing,

please use soft cloth or towel to get dry ofit. Do not

leave it dry by itself.

Please do not use any dissolvent, chemical agentor

any tool with strong friction for clean, which would

cause permanent damage to the screen.

GRANDVIEW CRYSTAL SCREEN CO., LTD.

Add: No. 43 South International Trade Avenue, Hualong

Town,Panyu, Guangzhou, GuangDong, China

Tel: +86-20-84899499

Installation of screen:

Referring to “Customized non-standard 8xed frame screen installation

drawing”, Firstly, connecting the mounting brackets to the frame,

measure the installation holes of several mounting brackets accurately

and draw lines and punch holes in the wall which is going to install.

Then uninstall the brackets from the screen, use tapping screws and

expansion 8xture to 8x matched mounting brackets on the wall. Make

sure mounting brackets are 8xed 8rm. Hand the screen onto upper

mounting bracket and tighten the screws between the bracket and the

frame.

connect to the frame

use use tapping

screws and

expansion 8xture

to 8x 8rm on

the wall

Locking parts should be,

referring to “Customized

non-standard 8xed

frame screen installation

drawing”, put into the

frame in order before

frame assembling

8nished.

measure the real distance

of installation

mounting bracket

of curved frame

locking bezel

inside the

frame

strengthen bar

frame

installation drawing

Installation Details

Put a certain number of 8xing lugs into the slots of top and bottom

bars, taking the following table as reference.

*If the frame needs to be joined, please refer to drawing sent by

Grandview for installation. And please insert the nuts, locker and

snap lugs into the frame accordingly, and then join frames with the

joint parts. (There is marks put on the frame, please check the marks

and 8nish joining the frame.)

① ②

③

④

Lay the two side bars and two concave bars on a horizontal ground,

building the shape of a rectangle.

①②③④

Please lock the frame

step by step:

Put the locating bracket into the corner side to match with screw

holes on the frame properly, then fasten with the Flat-head inner

hexagon screw.

Laying the fabric on the clean and level =oor with reverse side up,

lay the screen material =atly, then inset the tension rods into the

four sides of the fabric (Suggest to do in two person’s operations

in case for ruining the fabric). As shown in the 8gure:

Tension rod

Then, please lay the fabric =atly on the assembled frame ( keep

both fabric and frame with reverse side up). Adjust the distance

between snap lugs. After all snap lugs go through screen

material holes, then buckle as shown below:

After buckle all snap lugs safely, please adjust the position of

snap lugs slightly to make sure the fabric strength evenly, =atly

and have no winkles.

Locking parts should be,

referring to “Customized

non-standard 8xed frame

screen installation drawing”,

put into the frame in order

before frame assembling

8nished.

①

After adjusting the =atness of the fabric, please referencing

“Customized non-standard 8xed frame screen installation

drawing” to con8rm the position strengthen bar. Use the hard rod

to drag the inner locking bezel to the corresponding screw holes

position, then lock the screws and 8nish installation.

Dear Customer:

Thanks for your purchasing Grandview Prestige Flocked Frame Screen.

Please go through the user manual before use. Please keep the user

manual well for future reference.

Installation Bracket

Back

Support

bar

( To use when the

Screen Length is

over 4M, the Qty

based on the length)

Frame Joint Parts

Preparation before Installation

Installation Parts:

Long Frame

Short Frame

Support Bar Screw sets for Support Bar

Screen Fabric (1pcs) Tapping Screw &

Expansion pipe

Installation Bracket

Flat-head inner hexagon screw Fixing lug Philips pan head screw

Please prepare suitable tools before installation, such as gradienter, tape,

marker, Spanner etc.

Please measure the distance between the installation brackets accurately,

mark and drill holes on the wall, then 8x the matching installation brackets

to the wall with the tapping screws.

Use the proper screws according to the site. (Use tapping screws for

wooden wall and tapping screws with expansion 8xture for concrete wall)

Tension rod

M5X12

Screw

Dieses Handbuch passt für folgende Modelle

Andere Grandview Projektionsfläche Handbücher

Grandview

Grandview DIAS DI-M Series Bedienungsanleitung

Grandview

Grandview Edge R3 PE-L Series Bedienungsanleitung

Grandview

Grandview LF-PU Series Bedienungsanleitung

Grandview

Grandview Edge R2 Series Bedienungsanleitung

Grandview

Grandview Cyber CB-MI Series Bedienungsanleitung

Grandview

Grandview Elegant EL-M Series Bedienungsanleitung

Grandview

Grandview FC-M Bedienungsanleitung

Grandview

Grandview PT-L Series Bedienungsanleitung

Grandview

Grandview Deluxe Pull Down Bedienungsanleitung

Grandview

Grandview Edge R7 Bedienungsanleitung

Grandview

Grandview Dynamique R3 Bedienungsanleitung

Grandview

Grandview Large Stage MAIII Bedienungsanleitung

Grandview

Grandview CB-UMxx Series Bedienungsanleitung

Grandview

Grandview Large Stage MBII Bedienungsanleitung

Grandview

Grandview CR-Pxx Bedienungsanleitung

Grandview

Grandview SkyShow Series Bedienungsanleitung

Grandview

Grandview Liberty Flash Series Bedienungsanleitung

Grandview

Grandview Fast Fold Bedienungsanleitung

Grandview

Grandview Sky-Show Bedienungsanleitung

Grandview

Grandview GVFA100V Bedienungsanleitung

Grandview

Grandview GRUC040V Bedienungsanleitung

Grandview

Grandview LEGACY Series Bedienungsanleitung

Grandview

Grandview Pull Up Portable Screen Bedienungsanleitung

Grandview

Grandview GRIP084V Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

Elite Screens

Elite Screens M85XWS1-SRM Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

Elite Screens

Elite Screens Starling 2 Series Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung