Grantech SYS8F377VGGA-OM Bedienungsanleitung

(v1.x) Industrial Computer Board

SYS8F377VGGA-OM

Preface MS-98H8

The material in this document is our intellectual property. We take every care in

the preparation of this document, but no guarantee is given as to the correctness

of its contents. Our products are under continual improvement and we reserve the

right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

Revision History

Revision Date

V1.2 2017/07

Technical Support

If a problem arises with your system and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor.

iii

Preface

Safety Instructions

￭Always read the safety instructions carefully.

￭Keep this User’s Manual for future reference.

￭Keep this equipment away from humidity.

￭Lay this equipment on a reliable at surface before setting it up.

￭The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

￭Always Unplug the Power Cord before inserting any add-on card or mod-

ule.

￭All cautions and warnings on the equipment should be noted.

￭Never pour any liquid into the opening that could damage or cause electrical

shock.

￭If any of the following situations arises, get the equipment checked by ser-

vice personnel:

◯The power cord or plug is damaged.

◯Liquid has penetrated into the equipment.

◯The equipment has been exposed to moisture.

◯The equipment does not work well or you can not get it work according

to User’s Manual.

◯The equipment has dropped and damaged.

◯The equipment has obvious sign of breakage.

￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-

AGE THE EQUIPMENT.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

Preface MS-98H8

Chemical Substances Information

This product is in compliance with chemical substances regulations, such as

the EU REACH Regulation (Regulation EC No. 1907/2006 of the European

Parliament and the Council).

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

廢電池請回收

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed

of in California.

For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

Preface

CE Conformity

Hereby, we declare that this device is in compliance with the

essential safety requirements and other relevant provisions set out

in the European Directive.

FCC-A Radio Frequency

Interference Statement

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes effect on

August 13, 2005, products of “electrical and electronic equipment”

cannot be discarded as municipal waste anymore and manufacturers

of covered electronic equipment will be obligated to take back such

products at the end of their useful life.

Preface MS-98H8

CONTENTS

Trademarks ................................................................................................... ii

Revision History ............................................................................................ ii

Technical Support.......................................................................................... ii

Safety Instructions.........................................................................................iii

Chemical Substances Information ............................................................... iv

Battery Information....................................................................................... iv

CE Conformity............................................................................................... v

FCC-A Radio Frequency Interference Statement ......................................... v

WEEE Statement .......................................................................................... v

1. Overview.......................................................................................1-1

Motherboard Specications........................................................................1-2

Motherboard Layout...................................................................................1-4

2. Hardware Setup ...........................................................................2-1

Power Supply.............................................................................................2-3

Rear Panel I/O ...........................................................................................2-4

Connector...................................................................................................2-6

Jumper .....................................................................................................2-12

Slot...........................................................................................................2-14

3. BIOS Setup...................................................................................3-1

Entering Setup ...........................................................................................3-2

The Menu Bar ............................................................................................3-4

Main ...........................................................................................................3-5

Advanced ...................................................................................................3-6

Boot..........................................................................................................3-12

Security ....................................................................................................3-13

Chipset.....................................................................................................3-17

Power .......................................................................................................3-18

Save & Exit...............................................................................................3-20

Appendix WDT & GPIO ................................................................... A-1

WDT Sample Code ................................................................................... A-2

GPIO Sample Code .................................................................................. A-3

1-1-1

Thank you for choosing the 8F377-OM, an excellent industrial computer

board.

Based on the innovative Intel® Braswell N3000 Series SoC for optimal

system effciency, the 8F377-OM supports up to 4 GB of onboard DDR3L

1600MHz memory and allows connection to 3 or 2 independent displays

with DVI-D, VGA and LVDS outputs.

The 8F377-OM is durable under extreme environments and suitable to be

applied in every industrial eld, such as digital signage, kiosk, gaming,

industrial control automation and POS.

1Overview

1-2

Overview MS-98H8

Motherboard Specications

Processor

■Intel® Braswell SoC N3160 (QC-2.24GHz)

Memory

■Dual-channel DDR3L 1600MHz

■Onboard 4 GB

LAN

■LAN1: Intel® I211-AT Gigabit Fast Ethernet Controller

■LAN2: Intel® I210-AT Gigabit Fast Ethernet Controller

SATA

■1 x SATA 6Gb/s Port

■1 x mSATA 6Gb/s Slot

Audio

■Realtek® ALC887-VD2-CG HD Audio Codec

■1 x Front Audio Connector

Graphics

■HD Graphics integrated in Intel®processor

■1 x DVI-I Port (DVI-D only, max resolution 1920 x 1200)

■1 x VGA Connector (Max resolution 1920 x 1200)

■1 x 18/24-bit Dual Channel LVDS Connector (Max resolution 1920 x 1200)

■Supports dual independent displays: DVI-I (DVI-D only) + VGA, DVI-I

(DVI-D only) + LVDS, VGA + LVDS

■Supports three independent displays: DVI-I (DVI-D only) + VGA + LVDS

Rear Panel I/O

■1 x DVI-I Port (DVI-D only)

■2 x RJ45 GbE LAN Ports

■4 x USB 3.0 Ports

■1 x RS232/422/485 Serial Port

1-3

Overview

Onboard Headers/ Connectors/ Jumpers

■1 x 2-pin DC Power Connector

■1 x 4-pin SATA Power Connector

■1 x System FAN Connector

■1 x SATA 6Gb/s Port

■1 x 5-pin USB 2.0 Connector (1 port)

■1 x 10-pin USB 2.0 Connector (2 ports)

■1 x RS232/422/485 Serial Port Connector

■4 x RS232 Serial Port Connectors

■1 x Front Panel Connector

■1 x Front Audio Connector

■1 x GPIO Connector

■1 x LVDS Connector

■1 x Inverter Connector

■1 x Keyboard/Mouse Connector

■1 x VGA Connector

■1 x Port 80 Connector

■2 x LAN LED Connectors

■1 x Clear CMOS Jumper

■1 x Inverter Power Jumper

■1 x LVDS Power Jumper

■1 x AT/ATX Select Jumper

■1 x COM Port Power Jumper

■1 x LAN NVM Jumper

■1 x PCI-104 Power Jumper

Slot

■2 x Mini-PCIe Slots (including 1 x mSATA function)

■1 x PCI-104 Connector

■1 x SIM Card Slot

Form Factor

■4” EPIC: 165 (L) mm x 115 (W) mm

Environmental

■Operating Temperature: 0 ~ 60oC

■Storage Temperature: -20 ~ 80oC

■Humidity: 10 ~ 90% RH, non-condensing

1-4

Overview MS-98H8

Motherboard Layout

System Fan

Connector

Clear CMOS

Jumper

AT/ATX

Jumper

COM Port

Connector

USB 2.0

Connector

SATA Port

GPIO

Connector

COM Port

Power Jumper

DC Power

Connector

SATA Power

Connector

Mini PCIe

Slot

Back Panel

LVDS Power

Jumper

Inverter

Connector

Inverter Power

Jumper

LVDS

Connector

mSATA Slot

Front Panel

Connector

Front Audio

Connector

USB 2.0

Connector

KB/MS

Connector

PCI-104

Connector

PCI-104 Power

Jumper

LAN NVM

Jumper

Port 80

Connector

VGA

Connector

LAN LED

Connector

RJ45 GbE LAN PortDVI-I Port

(DVI-D only)

Serial PortUSB 3.0 Port

Inhaltsverzeichnis

Andere Grantech Einplatinencomputer Handbücher

Grantech

Grantech SYS7F877-OM Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung