GREAT PLANES MPS2607 Bedienungsanleitung

Table of Contents

ORIGINAL INSTRUCTIONS

Manufacturing, Inc.

www.greatplainsmfg.com

Read the operation manual entirely. When you see this symbol, the

subsequent instructions and warnings are serious - follow without

exception. Your life and the lives of others depend on it!

Illustrations may show optional equipment not supplied with standard unit.

78714

Base Unit with Options

Base Unit

329-300M

Operator’s Manual

MPS2607, MPS2609, & MPS2611

Multi-Purpose Seeder

Machine Identification

Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new

manual.

If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were

originally ordered, the weights and measurements are no longer accurate for your machine. Update the record by

adding the machine weight and measurements provided in the Specifications & Capacities Section of this manual with

the Option(s) weight and measurements.

Dealer Contact Information

Model Number

Serial Number

Machine Height

Machine Length

Machine Width

Machine Weight

Delivery Date

First Operation

Accessories

Name:

Street:

City/State:

Telephone:

Email:

1/17/23MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-300M

California Proposition 65

WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov

Table of Contents

1/17/23 MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-300M

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been

taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for

damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as

it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,

Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.

Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,

Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.

Brand and Product Names that appear and are owned by others are trademarks of their respective owners.

Printed in the United States of America

Table of Contents

Important Safety Information . . . . . . . . . . . . . 1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1

Be Aware of Signal Words. . . . . . . . . . . . . . . . . . . 1

Be Aware of Special Notices . . . . . . . . . . . . . . . . . 1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Patented Lockout Clutch . . . . . . . . . . . . . . . . . . . . 12

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . 12

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 12

Section 1: Assembly & Set-up . . . . . . . . . . . 13

Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . 13

Quick Hitch Compatibility . . . . . . . . . . . . . . . . . . . 13

Torque Requirements . . . . . . . . . . . . . . . . . . . . . . 13

Dealer Preparations . . . . . . . . . . . . . . . . . . . . . . . 13

Sling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Flex Guard Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Small Seeds Zero Adjustment Set-up . . . . . . . . . . 15

Tow Hitch Option . . . . . . . . . . . . . . . . . . . . . . . . . 16

Acremeter Option . . . . . . . . . . . . . . . . . . . . . . . . . 16

Hydraulic Plumbing For Tow Option . . . . . . . . . . . 18

Purge Hydraulic System . . . . . . . . . . . . . . . . . . . . 19

Section 2: Operating Instructions . . . . . . . . 20

Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 20

General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Tractor Shutdown Procedure . . . . . . . . . . . . . . . . 21

Hook-up 3-Point Seeder . . . . . . . . . . . . . . . . . . . . 22

Check LED Lights . . . . . . . . . . . . . . . . . . . . . . . . . 23

Check Tractor Clearance . . . . . . . . . . . . . . . . . . . 23

Unhook 3-Point Seeder . . . . . . . . . . . . . . . . . . . . . 23

Hook-up Pull-Type Seeder . . . . . . . . . . . . . . . . . . 24

Store Park Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Unhook Pull-Type Seeder . . . . . . . . . . . . . . . . . . . 25

Install Transport Locks and Spacers . . . . . . . . . . . 26

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Level Seeder With 3-Point Mount . . . . . . . . . . . . . 27

Level Seeder With Pull Hitch . . . . . . . . . . . . . . . . . 28

Fill Small Seeds Seedbox . . . . . . . . . . . . . . . . . . . 29

Filling Grass Seedbox . . . . . . . . . . . . . . . . . . . . . . 30

Filling Native Seedbox . . . . . . . . . . . . . . . . . . . . . 31

How the Seeder Works . . . . . . . . . . . . . . . . . . . . . 32

Grass Seeds Transmission . . . . . . . . . . . . . . . . . . 32

All-Seeds Drive Lock In/Out Clutch . . . . . . . . . . . . 33

Native Seeds Lock In/out Sprocket . . . . . . . . . . . . 33

Small Seeds Lock In/out Sprocket . . . . . . . . . . . . 33

Lock In/Out Pin Operation . . . . . . . . . . . . . . . . . . . 33

Operating the Seeder . . . . . . . . . . . . . . . . . . . . . . 34

General Operating Instructions . . . . . . . . . . . . . . . 35

Section 3: Roller Adjustments . . . . . . . . . . . . 36

Front Spike Roller Angle . . . . . . . . . . . . . . . . . . . . 36

Mud Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Section 4: Grass Seed Rate Adjustment . . . . 37

Grass Seedbox Drive Speed Ranges . . . . . . . . . . 37

Grass Seedbox Cup Gate Setting . . . . . . . . . . . . . 37

Grass Seed Rate Adjustments . . . . . . . . . . . . . . . 38

Calibrate Grass Seed Dispersal . . . . . . . . . . . . . . 38

Seed Rate Crank Instructions . . . . . . . . . . . . . . . . 39

Pull-Type Seeder . . . . . . . . . . . . . . . . . . . . . . . . 39

Three Point Mount Seeder . . . . . . . . . . . . . . . . . 39

Install Seed Rate Crank . . . . . . . . . . . . . . . . . . . 39

Store Seed Rate Crank . . . . . . . . . . . . . . . . . . . 39

Grass Seed Rate Chart (English) . . . . . . . . . . . . . 40

Grass Seed Rate Chart (Metric) . . . . . . . . . . . . . . 43

Section 5: Small Seed Rate Adjustment . . . . 46

Small Seeds Seed Rate Adjustments . . . . . . . . . . 46

Calibrate Small Seeds Dispersal . . . . . . . . . . . . . . 46

Small Seed Rate Chart (English) . . . . . . . . . . . . . . 47

Small Seed Rate Chart (Metric) . . . . . . . . . . . . . . . 50

Section 6: Native Seed Rate Adjustment . . . 54

Native Seed Rate Adjustments . . . . . . . . . . . . . . . 54

Calibrate Native Seed Dispersal . . . . . . . . . . . . . . 54

Native Seed Rate Chart . . . . . . . . . . . . . . . . . . . . 55

Section 7: Options & Accessories . . . . . . . . . 56

Agitation Extension Kit (Accessory) . . . . . . . . . . . . 56

Electronic Acremeter (Option) . . . . . . . . . . . . . . . . 56

Slow Moving Vehicle Sign (Accessory) . . . . . . . . . 56

Section 8: Maintenance & Lubrication . . . . . 58

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Roller Chains and Sprockets . . . . . . . . . . . . . . . . . 58

General Maintenance . . . . . . . . . . . . . . . . . . . . . 58

All Seeds Drive Chains #3, #6, & #9 . . . . . . . . . 58

Grass Seeds Drive Chain #12 . . . . . . . . . . . . . . 58

Transmission Drive Chain #15 . . . . . . . . . . . . . . 59

Small Seeds Drive Chain #18 . . . . . . . . . . . . . . . 59

Native Seedbox . . . . . . . . . . . . . . . . . . . . . . . . . 59

Native Grass Seed Main Drive Chain #1 . . . . . .59

Native Grass Seed Gearbox Drive Chain #5 . . .59

Native Grass Seed Cup Drive Chain #10 . . . . . .59

Native Grass Seed Agitator Drive Chain #14 . . .59

Continue Table of Contents on next page

Table of Contents Continued

1/17/23MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-300M

Table of Contents

Roller Chain Part Numbers . . . . . . . . . . . . . . . . . . 60

All, Grass, and Small Seeds Drive Chains . . . . . 60

Native Seeds Drive Chains . . . . . . . . . . . . . . . . 60

Front Spike Rollers . . . . . . . . . . . . . . . . . . . . . . . . 60

Rear Packer Roller . . . . . . . . . . . . . . . . . . . . . . . . 60

Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . 62

Long-Term Storage . . . . . . . . . . . . . . . . . . . . . . . . 62

Ordering Replacement Parts . . . . . . . . . . . . . . . . . 63

Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . . 64

Front Roller Bearings . . . . . . . . . . . . . . . . . . . . . 64

Rear Roller Left End Bearing . . . . . . . . . . . . . . . 64

Rear Roller Right End Bearing . . . . . . . . . . . . . . 64

Rear Roller Center Bearings . . . . . . . . . . . . . . . 65

Small Seed Drive Sprocket Bearing . . . . . . . . . . 65

Native Seed Drive Sprocket Bearings . . . . . . . . 65

Seed Cup Drive Shafts . . . . . . . . . . . . . . . . . . . . 66

All Seeds Drive Sprocket . . . . . . . . . . . . . . . . . . 66

Roller Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Seed Cup Sprockets and Nylon Washers . . . . . 67

Gearbox for the Native Seedbox . . . . . . . . . . . . 67

Axle Hub Bearing . . . . . . . . . . . . . . . . . . . . . . . . 67

Section 9: Specifications & Capacities . . . . 68

Section 10: Features & Benefits . . . . . . . . . . 70

Section 11: Troubleshooting . . . . . . . . . . . . 71

Section 12: Torque Values & Tire Inflation . 72

Section 13: Warranty . . . . . . . . . . . . . . . . . . . 73

Important Safety Information

1/17/23 1

Important Safety Information

Listed below are common practices that may or may not be applicable to the products

described in this manual.



Tractor Shutdown & Storage

If engaged, disengage power

take-off.

Park on solid, level ground and

lower implement until it is flat on

the ground or on non-concrete

support blocks.

Put tractor in park or set park

brake.

Turn off engine and remove

ignition key to prevent

unauthorized starting.

Relieve all hydraulic pressure to

auxiliary hydraulic lines.

Wait for all components to stop

before leaving operator’s seat.

Use steps, grab-handles and

anti-slip surfaces when stepping

on and off the tractor.

OFF

REMOVE

Safety Precautions for

Children

Tragedy can occur if the operator

is not alert to the presence of

children, Children generally are

attracted to implements and their

work.

Never assume children will remain

where you last saw them.

Keep children out of the work area

and under the watchful eye of a

responsible adult.

Be alert and shut the implement

and tractor down if children enter

the work area.

Never carry children on the tractor

or implement. There is not a safe

place for them to ride. They may

fall off and be run over or interfere

with the control of the power

machine.

Never allow children to operate the

power machine, even under adult

supervision.

Never allow children to play on the

power machine or implement.

Use extra caution when backing

up. Before the tractor starts to

move, look down and behind to

make sure the area is clear.

Safety at All Times

Careful operation is your best

assurance against an accident.

All operators, no matter how much

experience they may have, should

carefully read this manual and

other related manuals before

operating the power machine and

this implement.

Thoroughly read and understand

the “Safety Label” section. Read

all instructions noted on them.

Do not operate the equipment

while under the influence of drugs

or alcohol as they impair the ability

to safely and properly operate the

equipment.

The operator should be familiar

with all functions of the tractor and

attached implement, and be able

to handle emergencies quickly.

Make sure all guards and shields

appropriate for the operation are in

place and secured before

operating the implement.

Keep all bystanders away from

equipment and work area.

Start tractor from the driver’s seat

with hydraulic controls in neutral.

Operate tractor and controls from

the driver’s seat only.

Never dismount from a moving

tractor or leave tractor unattended

with engine running.

Do not allow anyone to stand

between the implement and

tractor while backing up to the

implement.

Keep hands, feet, and clothing

away from power-driven parts.

While transporting and operating

equipment, watch out for objects

overhead and along side such as

fences, trees, buildings, wires, etc.

Do not turn tractor so tight as to

cause hitched implement to ride

up on the tractor’s rear wheel.

Store implement in a safe and

secure area where children

normally do not play. When

needed, secure implement against

falling with support blocks.

Look for the Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a potential hazard

to personal safety and extra precaution must be taken. When you

see this symbol, be alert and carefully read the message that

follows it. Hazard control, and accident prevention are dependent

upon the awareness, concern, prudence, and proper training of

personnel involved in the operation, transport, maintenance, and

storage of equipment.

Be Aware of Signal Words

A signal word designates a degree or level of hazard seriousness. They are:

DANGER:

WARNING:

CAUTION:

Indicates a hazardous situation that, if not avoided, will result

in death or serious injury.

Indicates a hazardous situation that, if not avoided, could

result in death or serious injury.

Indicates a hazardous situation that, if not avoided, may result

in minor or moderate injury.

Be Aware of Special Notices

Special notices are intended to point out important and helpful information that

should be followed. They are usually placed inside a box. They are:

Indicates that equipment or property damage could result if

instructions are not followed.

Indicates supplementary explanations that will be helpful when

using the equipment.

IMPORTANT:

NOTE:

Important Safety Information

1/17/23

Listed below are common practices that may or may not be applicable to the products

described in this manual.

Practice Safe Maintenance

Understand procedure before doing

work. Refer to the Operator’s

Manual for additional information.

Work on a level surface in a clean

dry area that is well-lit.

Lower implement to the ground and

follow all shutdown procedures

before leaving the operator’s seat to

perform maintenance.

Do not work under any hydraulically

supported equipment. It can settle,

suddenly leak down, or be lowered

accidentally. If it is necessary to

work under the equipment,

securely support it with stands or

suitable blocking beforehand.

Use properly grounded electrical

outlets and tools.

Use correct tools and equipment for

the job that are in good condition.

Allow equipment to cool before

working on it.

Disconnect battery ground cable (-)

before servicing or adjusting

electrical systems or before welding

on implement.

Inspect all parts. Make certain

parts are in good condition &

installed properly.

Replace parts on this implement

with genuine Great Plains parts

only. Do not alter this implement in

a way which will adversely affect its

performance.

Do not grease or oil implement

while it is in operation.

Remove buildup of grease, oil, or

debris.

Always make sure any material and

waste products from the repair and

maintenance of the implement are

properly collected and disposed.

Remove all tools and unused parts

from equipment before operation.

Do not weld or torch on galvanized

metal as it will release toxic fumes.

Use A Safety Chain

A safety chain will help control

drawn machinery should it

separate from the tractor drawbar.

Use a chain with the strength

rating equal to or greater than the

gross weight of the towed

implement.

Attach the chain to the tractor

drawbar support or other specified

anchor location. Allow only

enough slack in the chain to

permit turning.

Always hitch the implement to the

machine towing it. Do not use the

safety chain to tow the implement.

Tire Safety

Tire changing

can be

dangerous

and must be

performed by

trained personnel using the

correct tools and equipment.

Always properly match the wheel

size to the properly sized tire.

Always maintain correct tire

pressure. Do not inflate tires

above recommended pressures

shown in the Operator’s Manual.

When inflating tires, use a clip-on

chuck and extension hose long

enough to allow you to stand to

one side and NOT in front of or

over the tire assembly. Use a

safety cage if available.

Securely support the implement

when changing a wheel.

When removing and installing

wheels, use wheel handling

equipment adequate for the

weight involved.

Make sure wheel bolts have been

tightened to the specified torque.

Transport Safely

Comply with federal, state, and

local laws.

Use towing vehicle and trailer of

adequate size and capacity. Secure

equipment towed on a trailer with

tie downs and chains.

Sudden braking can cause a towed

trailer to swerve unexpectedly.

Reduce speed if towed trailer is not

equipped with brakes.

Avoid contact with any overhead

utility lines or electrically charged

conductors.

Always drive with load on end of

loader arms low to the ground.

Always drive straight up and down

steep inclines with heavy end of

skid steer on the “uphill” side.

Engage park brake when stopped

on an incline.

Maximum transport speed for an

attached equipment is 20 mph

(32 km/h). DO NOT EXCEED.

Never travel at a speed which does

not allow adequate control of

steering and stopping. Some rough

terrains require a slower speed.

As a guideline, use the following

maximum speed weight ratios for

attached equipment:

20 mph (32 km/h) when weight

of attached equipment is less

than or equal to the weight of

machine towing the equipment.

10 mph (16 km/h) when weight of

attached equipment exceeds

weight of machine towing

equipment but not more than

double the weight.

IMPORTANT: Do not tow a load

that is more than double the weight

of the vehicle towing the load.

Important Safety Information

1/17/23 3

Listed below are common practices that may or may not be applicable to the products

described in this manual.

Use Seat Belt and ROPS

Great Plains recommends the use

of a CAB or roll-over-protective-

structures (ROPS) and seat belt

in almost all power machines.

Combination of a CAB or ROPS

and seat belt will reduce the risk

of serious injury or death if the

power machine should be upset.

If ROPS is in the locked-up

position, fasten seat belt snugly

and securely to help protect

against serious injury or death

from falling and machine overturn.

Keep Riders Off

Machinery

Never carry riders on the tractor or

implement.

Riders obstruct operator’s view

and interfere with the control of

the power machine.

Riders can be struck by objects or

thrown from the equipment.

Never use the tractor or

implement to lift or transport

riders.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire

extinguisher handy.

Keep emergency numbers for

doctor, ambulance, hospital, and

fire department near the phone.

911

Use Safety

Lights and Devices

A slow moving power machine

can create a hazard when driven

on public roads. They are difficult

to see, especially at night. Use the

Slow Moving Vehicle (SMV) sign

when on public roads.

Flashing warning lights and turn

signals are recommended

whenever driving on public roads.

Avoid High Pressure

Fluids

Escaping fluid

under pressure will

penetrate the skin or

eyes causing serious injury.

Relieve all residual pressure

before disconnecting hydraulic

lines or performing work on the

hydraulic system.

Make sure all hydraulic fluid

connections are properly

tightened/torqued and all

hydraulic hoses and lines are in

good condition before applying

pressure to the system.

Use a piece of paper or

cardboard, NOT BODY PARTS,

to check for suspected leaks.

Wear protective gloves and

safety glasses or goggles when

working with hydraulic systems.

DO NOT DELAY. If an accident

occurs, seek immediate

emergency medical care or

gangrene may result.

Wear Personal Protective

Equipment (PPE)

Wear protective clothing and

equipment appropriate for the job

such as safety shoes, safety,

glasses, hard hat, dust mask,

and ear plugs.

Clothing should fit snug without

fringes and pull strings to avoid

entanglement with moving parts.

Prolonged exposure to loud noise

can cause hearing impairment or

hearing loss. Wear suitable

hearing protection such as

earmuffs or earplugs.

Operating a machine safely

requires the operator’s full

attention. Avoid wearing

headphones while operating

equipment.

Important Safety Information

1/17/23

Dig Safe - Avoid

Underground Utilities

USA: Call 811

CAN: digsafecanada.ca

Always contact your local utility

companies (electrical, telephone,

gas, water, sewer, and others)

before digging so that they may

mark the location of any

underground services in the area.

Be sure to ask how close you can

work to the marks they positioned.

Listed below are common practices that may or may not be applicable to the products

described in this manual.

Avoid crystalline Silica

(quartz) Dust

Because crystalline silica is a basic

component of sand and granite,

many activities at construction sites

produce dust containing crystalline

silica. Trenching, sawing, and boring

of material containing crystalline

silica can produce dust containing

crystalline silica particles. This dust

can cause serious injury to the

lungs (silicosis).

There are guidelines which should

be followed if crystalline silica

(quartz) is present in the dust.

Be aware of and follow OSHA

(or other local, State, or Federal)

guidelines for exposure to airborne

crystalline silica.

Know the work operations where

exposure to crystalline silica may

occur.

Participate in air monitoring or

training programs offered by the

employer.

Be aware of and use optional

equipment controls such as water

sprays, local exhaust ventilation,

and enclosed cabs with positive

pressure air conditioning if the

machine has such equipment.

Otherwise respirators shall be worn.

Where respirators are required, wear

a respirator approved for protection

against crystalline silica containing

dust. Do not alter respirator in any

way. Workers who use tight-fitting

respirators can not have beards/

mustaches which interfere with the

respirator seal to the face.

If possible, change into disposable

or washable work clothes at the

work site; shower and change into

clean clothing before leaving the

work site.

Do not eat, drink, use tobacco

products, or apply cosmetics in

areas where there is dust containing

crystalline silica.

Store food, drink, and personal

belongings away from the work

area.

Wash hands and face before eating,

drinking, smoking, or applying

cosmetics after leaving the exposure

area.

Handle

Chemicals Properly

Protective clothing should be

worn.

Handle all chemicals with care.

Follow instructions on container

label.

Agricultural chemicals can be

dangerous. Improper use can

seriously injure persons, animals,

plants, soil, and property.

Inhaling smoke from any type of

chemical fire can be a serious

health hazard.

Store or dispose of unused

chemicals as specified by the

chemical manufacturer.

Important Safety Information

1/17/23 5

This page left blank intentionally.

Important Safety Information

MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-300M

Table of Contents

1/17/23

Safety Labels

Your Multi-Purpose Seeder comes equipped with all safety

labels in place. They were designed to help you safely operate

your implement. Read and follow their directions.

1. Keep all safety labels clean and legible.

2. Refer to this section for proper label placement. Replace

all damaged or missing labels. Order new labels from your

nearest Great Plains dealer. To find your nearest dealer,

visit our dealer locator at www.greatplainsag.com.

3. Some new equipment installed during repair requires

safety labels to be affixed to the replaced component as

specified by Great Plains. When ordering new components

make sure the correct safety labels are included in the

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean surface area where label is to be placed.

b. Spray soapy water onto the cleaned area.

c. Peel backing from label and press label firmly onto the

surface.

d. Squeeze out air bubbles with edge of a credit card or

with a similar type of straight edge.

73340

Important Safety Information

818-337C

Warning: Excessive Speed Hazard

1 Place: On the 3-point hitch frame

70383

838-293C

Warning: Read Operator’s Manual - General Warning

1 Place: On the front left side of the mainframe

70243

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GREAT PLANES Sämaschine Handbücher

GREAT PLANES

GREAT PLANES NTS2607 Bedienungsanleitung

Beliebte Sämaschine Handbücher anderer Marken

Sola

Sola A-6000/NS PLUS Bedienungsanleitung

Bourgault

Bourgault 7000 Series Bedienungsanleitung

Land Pride

Land Pride All Purpose Seeder APS1548 Bedienungsanleitung

Meridian

Meridian 112BST Bedienungsanleitung

Botanicare

Botanicare POWER CLONER 180 Bedienungsanleitung

Toro

Toro 33512 Bedienungsanleitung

HE-VA

HE-VA Terra-seeder Series Bedienungsanleitung

Meridian

Meridian 220BST Bedienungsanleitung

Toro

Toro 23508 Bedienungsanleitung

ARBOS

ARBOS Unica Super Handbuch

SPYKER

SPYKER S120-4510 Bedienungsanleitung

Maschio

Maschio Gaspardo SP Series Benutzerhandbuch

Tar River

Tar River DRL-048 Bedienungsanleitung

Classen

Classen HTS-20HD Bedienungsanleitung

Landoll

Landoll Brillion SSB Bedienungsanleitung

Sulky

Sulky Kronos Bedienungsanleitung

John Shearer

John Shearer Pasture Renovation Drill Bedienungsanleitung

Land Pride

Land Pride MPS2607 Bedienungsanleitung