Gree GMV-ND24A/A-T Bedienungsanleitung

AIR CONDITIONER

INDOOR UNIT

Owner's Manual

Original Instructions

Commercial Air Conditioners

GMV DC Air Handler

Models:

GMV-ND24A/A-T(U)

GMV-ND30A/A-T(U)

GMV-ND36A/A-T(U)

GMV-ND42A/A-T(U)

GMV-ND48A/A-T(U)

GMV-ND54A/A-T(U)

Preface

For correct installation and operation, please read all instructions carefully. Before

reading the instructions, please be aware of the following items:

(1) For the safe operation of this unit, please read and follow the instructions carefully.

(2) During operation, total capacity of indoor units should not exceed the total capacity

of outdoor units. Otherwise, poor effect of cooling or heating may result.

(3) Direct operators or maintainers should well keep this manual.

(4) If this unit fails to operate normally, please contact our service center as soon as

possible and provide the following information:

● Content on the nameplate(model number, cooling capacity, production code,

ex-factory date).

● Malfunction details(before and after the malfunction occurs).

(5) Each unit has been strictly tested and proved to be qualified before ex-factory. In

order to prevent units from being damaged or operating normally because of improper

disassembly, please do not disassemble the unit by yourself. If you need to disassemble

and check units, please contact our service center. We will send specialists to guide the

disassembly.

(6) All graphics in this manual is only for your reference. For sales or production

reasons, these graphics are subject to change by manufacturer without prior notice.

User Notice

● This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.Children should be supervised to ensure that they do not play

with the appliance.

Correct Disposal of this product

This marking indicates that this product should not be disposed with

other household wastes. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To

return your used device, please use the return and collection systems

or contact the retailer where the product was purchased. They can take

this product for environmental safe recycling.

Contents

1 Safety Precautions .............................................................................................. 1

2 Product Introduction ............................................................................................3

2.1 Names of Key Components .....................................................................................3

2.2 Rated Working Condition .........................................................................................3

3 Preparative for Installation...................................................................................4

3.1 Pre-Installation Instruction........................................................................................4

3.2 Important Safety Instructions....................................................................................4

3.3 Requirements for Communication Line ....................................................................6

3.4 Wiring Requirements................................................................................................7

4 Installation Instructions........................................................................................ 8

4.1 Dimension Data .......................................................................................................8

4.2 Location...................................................................................................................9

4.3 Piping Work............................................................................................................10

4.4 Condensate Removal............................................................................................. 11

4.5 Ductwork................................................................................................................11

4.6 Installation of Wired Controller ...............................................................................12

5 Wiring Work.......................................................................................................12

5.1 Connection of Wire and Patch Board Terminal.......................................................12

5.2 Power Cord Connection.........................................................................................13

5.3 Connection of Communication Wire between Indoor Unit and Outdoor Unit (or indoor

unit)..............................................................................................................................13

5.4 Connect Communication Wire of Wired Controller .................................................14

5.5 Illuminate for Connection of Wired Controller and Indoor Units Network ................15

6 Routine Maintenance......................................................................................... 17

6.1 Cleaning of Filter....................................................................................................17

6.2 Maintenance before the Seasonal Use...................................................................17

6.3 Maintenance after the Seasonal Use......................................................................17

7 Table of Error Codes for Indoor Unit.................................................................. 18

8 Troubleshooting................................................................................................. 18

GMV DC Inverter VRF

1 Safety Precautions

WARNING

(1) Follow this instruction to complete the installation work. Please carefully read this manual before unit

startup and service.

(2) Wire size of power cord should be large enough.The damaged power cord and connection wire should be

replaced by exclusive cable.

(3) After connecting the power cord, please fix the electric box cover properly in order to avoid accident.

(4) Never fail to comply with the nitrigen charge requirements.Charge nitrogen when welding pipes.

(5) Never short-circiut or cancel the pressure switch to prevent unit damage.

(6) Please firstly connect the wired controller before energization, otherwise wired controller can not be used.

(7) Before using the unit, please check if the piping and wiring are correct to avoid water leakage, refrigerant

leakage, electric shock, or fire etc..

(8) Do not insert fingers or objects into air outlet/inlet grille.

(9) Open the door and window and keep good ventilation in the room to avoid oxygen deficit when the gas/oil

supplied heating equipment is used.

(10) Never start up or shut off the air conditioner by means of directly plug or unplug the power cord.

(11) Turn off the unit after it runs at least five minutes; otherwise it will influence oil return of the compressor.

(12) Do not allow children operate this unit.

(13) Do not operate this unit with wet hands.

(14) Turn off the unit or cut off the power supply before cleaning the unit, otherwise electric shock or injury

may happen.

(15) Never spray or flush water towards unit, otherwise malfunction or electric shock may happen.

(16) Do not expose the unit to the moist or corrosive circumstances.

(17) Under cooling mode, please don't set the room temperature too low and keep the temperature difference

between indoor and outdoor unit within 5℃(41℉).

(18) User is not allowed to repair the unit. Fault service may cause electric shock or fire accidents. Please

contact Gree appointed service center for help.

(19) Before installation, please check if the power supply is in accordance with the requirements specified on the

nameplate. And also take care of the power safety.

(20) Installation should be conducted by dealer or qualified personnel. Please do not attempt to install the unit by

yourself. Improper handling may result in water leakage, electric shock or fire disaster etc..

GMV DC Inverter VRF

(21) Be sure to use the exclusive accessory and part to prevent the water leakage, electric shock and fire

accidents.

(22) Make sure the unit can be earthed properly and soundly after plugging into the socket so as to avoid

electric shock. Please do not connect the ground wire to gas pipe, water pipe, lightning rod or telephone line.

(23) Electrify the unit 8 hours before operation. Please switch on for 8 hours before operation. Do not cut off the

power when 24 hours short-time halting (to protect the compressor).

(24) If refrigerant leakage happens during installation, please ventilate immediately. Poisonous gas will emerge if

the refrigerant gas meets fire.

(25) Volatile liquid, such as diluent or gas will damage the unit appearance.Only use soft cloth with a little neutral

detergent to clean the outer casing of unit.

(26) If anything abnormal happens (such as burning smell), please power off the unit and cut off the main power

supply, and then immerdiately contact Gree appointed service center.If abnormality keeps going, the unit

might be damaged and lead to electric shock or fire.

Any personal injury or property loss caused by improper installation, improper debug,

unnecessary repair or not following the instructions of this manual should not be the

responsibility of Gree Electric Appliances, Inc. of Zhuhai.

GMV DC Inverter VRF

2 Product Introduction

2.1 Names of Key Components

Fig 2.1

2.2 Rated Working Condition

Indoor Side Condition

Outdoor Side Condition

Dry Bulb Temp℃(℉)

Wet Bulb Temp℃(℉)

Dry Bulb Temp℃(℉)

Wet Bulb Temp℃(℉)

Rated Cooling

27(80.6)

19(66.2)

35(95)

24(75.2)

Rated Heating

20(68.0)

15(59.0)

7(44.6)

6(42.8)

Indoor Unit Working Temperature Range: 16°C(60.8 °F)~32°C(89.6 °F)

GMV DC Inverter VRF

3 Preparative for Installation

3.1 Pre-Installation Instruction

3.1.1 Checking Product Received

After receiving the product, please check if there is any damage caused by

transportation.Shipping damage is the responsibility of the carrier. Verify the model number,

specifications and accessories are correct prior to installation. The distributor or manufacturer

will not accept claims from dealers for transportation damage or installation of incorrectly

shipped units.

3.1.2 Before Installation

Carefully read all instructions for the installation prior to installing product. Make sure each

step or procedure is understood and any special considerations are taken into account before

starting installation. Assemble all tools, hardware and supplies needed to complete the

installation. Some items may need to be purchased locally. Make sure everything needed to

install the product is on hand before starting.

3.1.3 Codes & Regulations

This product is designed and manufactured to comply with national codes. It is installer‟s

responsibilities to install the product in accordance with such codes and/or any prevailing local

codes/regulations. The manufacturer assumes no responsibilities for equipment installed in

violation of any codes or regulations.

3.1.4 Replacement Parts

When reporting shortages or damages, or ordering repair parts, give the complete product

model and serial numbers as stamped on the product. Replacement parts for this product are

available through your contractor or local distributor.

3.2 Important Safety Instructions

Recognize Safety Symbols, Words, and Labels

The following symbols and labels are used throughout this manual to indicate immediate or

potential hazards. It is the owner‟s responsibility to read and comply with all safety information

and instructions accompanying these symbols. Failure to heed safety information increases the

risk of serious personal injury or death, property damage and/or product damage.

DANGER: Immediate hazards which will result in property damage, product damage,

severe personal injury or death.

WARNING: Hazards or unsafe pratices could result in property damage, product

damage, severe personal injury or death.

CAUTION: Hazards or unsafe practices which may result in property damage,

product damage, severe personal injury or death.

GMV DC Inverter VRF

WARNING: Before serving or installing this equipment. The electrical power to this

unit must be in the “off” position. Caution, more than one disconnect may exist. Failure to

observe this warning may result in an electrical shock that can cause personal injury or death.

WARNING: The United States environmental protection agency („epa”) has issued

various regulations regarding the introduction and disposal of refrigerants introduced into this

unit. Failure to follow these regulations may harm the enviroment and can lead to the imposition

of substantial fines. These regulations may vary due to the passage of laws. A certified

technician must perform the installation and service of this product. Should questions arise,

contact your local epa office.

WARNING: Due to high system pressure and electrical shock in potential,

installation and service work can be dangerous. Only trained and qualified personnels are

permitted to install or service this equipment. Observe all warnings contained in this manual

and labels/tags attached to the equipment.

WARNING: This product is factory shipped for use with a 208-230/1/60 electrical

power supply. This air handler must not be reconfigured to operate with any other power

supply.

WARNING: The unit must have an uninterrupted, unbroken electric grounding to

minimize the possibility of personal injury if an electric fault occurs. The electric grounding

circuit may consist of an appropriate sized power cord which connected with the grounding

piece located in the unit control box and also connecting to the building electric service panel.

Other methods of grounding are permitted if performed in accordance with the “national electric

code” (nec)/ “american national standards institute” (ansi)/ “national fire protection association”

(nfpa) 70 and local/state codes. In canada, electric grouding conforms to the canadian electric

code csa c22.1. failure to observe this warning can result in electrical shock that can cause

personal injury.

Special warning for installation of furnaces or air handling units in enclosed areas,

such as garages, utility rooms or parking areas.

Carbon monoxide producing devices (such as an automobile, space heater, gas water

heater, etc.) should not be operated in enclosed areas such as unventilated garages, utility

rooms or parking areas because of the danger of carbon monoxide (CO) poisoning resulting

from the exhaust emissions.If a furnace or air handler is installed in an enclosed area such as a

GMV DC Inverter VRF

garge, utility room or parking area and a carbon monoxide producing device is operated therein,

there must be adequate ventilation directly to outside.

This ventilation is necessary to avoid the danger of CO poisoning which can occur if a

carbon monoxide producing device continues to operate in the enclosed area. Carbon

monoxide emission can be (re)circulated throughout the building if the furnace or air handler is

operating in any mode.

CO can cause serious illness including permanent brain damage or death.

3.3 Requirements for Communication Line

Note:

If the unit is installed in the place with strong electromagnetic interference, shielded

wire must be applied on the communication wire between indoor unit and wired

controller. Twisted pair line with shielding function must be applied on the

communication wire between indoor unit and indoor unit (outdoor unit).

3.3.1 Select communication line for indoor unit and wired controller

Fig 3.3.1

Wire type

Total length of

communication wire

between indoor unit and

wired controller (m/feet)

Wire diameter

(AWG)

Wire standard

Remark

Light/Ordinary

polyvinyl

chloride

sheathed cord.

(UL60335-2011)

L≤250(850)

2×18~2×16

UL60335-201

1. Total length of

communication cable can't

exceed 250m (850feet).

2. The cord shall be Circular

cord (the cores shall be

twisted together).

3. If unit is installed in places

with intense magnetic field or

strong interference, it is

necessary to use shielded

wire.

GMV DC Inverter VRF

3.3.2 Select communication line for indoor unit and outdoor unit

Fig 3.3.2

Wire type

Total length of

communication wire

between indoor unit and

indoor unit(outdoor unit)

(m/feet)

Wire diameter

(AWG)

Wire standard

Remark

(communication

line for indoor

unit)

Light/Ordinary

polyvinyl chloride

sheathed cord.

(UL60335-2011)

L≤1000(3280)

≥2×18

UL60335-2011

1. If the wire diameter is

enlarged to 18AWG, the

total communication cable

length can reach 1500m

(4920 feet).

2. The cord shall be Circular

cord (the cores shall be

twisted together).

3. If unit is installed in places

with intense magnetic field

or strong interference, it is

necessary to use shielded

wire.

(communication

line for outdoor

unit)

Light/Ordinary

polyvinyl chloride

sheathed cord.

(UL60335-2011)

L≤1000(3280)

≥2×18

UL60335-2011

3.4 Wiring Requirements

(1) Power Cord Size and Air Switch Capacity

Model

Power Cord Size

Air Switch

apacity

(A)

Minimum

Sectional Area of

Ground

Wire(AWG)

Minimum Sectional

Area of Power

Cord(AWG)

GMV-ND24A/A-T(U)

208/230V-1Ph-60HZ

GMV-ND30A/A-T(U)

GMV-ND36A/A-T(U)

GMV-ND42A/A-T(U)

GMV-ND48A/A-T(U)

GMV-ND54A/A-T(U)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gree Klimaanlage Handbücher

Gree

Gree GMV-140WL/A-T Bedienungsanleitung

Gree

Gree GAC09AA-A3RNB4C Bedienungsanleitung

Gree

Gree MULTI30HP230V1CO Bedienungsanleitung

Gree

Gree FGR20Pd/DNa-X Bedienungsanleitung

Gree

Gree GWH09KF-K3DNA6G/I Bedienungsanleitung

Gree

Gree GWH18QD-K3DNA3G Bedienungsanleitung

Gree

Gree GWH07QA-K3NNA1A Bedienungsanleitung

Gree

Gree NCHS1B(U) Bedienungsanleitung

Gree

Gree GWH09AB-A3DNA1B Bedienungsanleitung

Gree

Gree GWC30LB-D3DNA3G Bedienungsanleitung

Gree

Gree GMV6 Series Bedienungsanleitung

Gree

Gree GWH12ACC-K6DNA1D Bedienungsanleitung

Gree

Gree GEH09AA-K6DNA1E/I Bedienungsanleitung

Gree

Gree GMV-ND28TS/B-T Bedienungsanleitung

Gree

Gree GWH(07)UA-K3DNA1A/I Bedienungsanleitung

Gree

Gree VIREO+ VIR12HP115V1B Bedienungsanleitung

Gree

Gree GWH09AGA-K6DA1A Bedienungsanleitung

Gree

Gree KF-70DW/NA1 Betriebsanleitung

Gree

Gree GWH09RB-K3DNA3G Bedienungsanleitung

Gree

Gree GMV-Y96WM/A-F(U) Bedienungsanleitung

Gree

Gree GWC09QB-K3DNB2B Bedienungsanleitung

Gree

Gree GMV-ND28C/A-T Bedienungsanleitung

Gree

Gree GWH12UB-K3DNA4F Bedienungsanleitung

Gree

Gree KW09HQ3D6D Series Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung