Gree GWCN24 B9NK1BA Bedienungsanleitung

GREE ELECTRIC APPLIANCES.INC.OF ZHUHAI

ＧＲＥＥＥＬＥＣＴＲＩＣＡＰＰＬＩＡＮＣＥＳ．ＩＮＣ．ＯＦＺＨＵＨＡＩ

C GREE 66162311 (GB4706.32-2004) V1.0

GWCN24(12×2)B9NK1BA

OWNER'S MANUAL

Models:

Thank you for choosing GREE air conditioner,

for correct operation, please read this owner's

manual carefully before operating the unit and

keep it carefully for consultation.

GREEN HARBOR

GWHN24(12×2)B9NK1BA

GWHN24(12×2)B9NK2BA

GWCN24(12×2)B9NK3BA

GWHN24(12×2)B9NK3BA

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．５

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．６

■ ．．．．．．．．．．．．．．．．．．．．．．７

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１１

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１３

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．４

CONTENTS

Operation and maintenance

Notices for operation

Models and specifications

Notices for operation

Names and functions of each part

Operation of wireless remote control

Clean and care

Troubleshooting

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１７

■．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１８

■．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．２０

■．．．．．．．．．．．．．．．．２１

■ ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．１５

Installation service

Notices for installation

Install indoor unit

Install outdoor unit

Test operation and check after installation

Thank you for choosing this air conditioner, please read this owner's

manual carefully before operating the unit and keep it carefully for consultation.

Installation dimension diagram

This symbol stands for the items should be forbidden This symbol stands for the items should be followed

１

★

Please read the following carefully before operating.

WARNING

When having a burning smell

or smoke, please turn off the power

supply and contact with the service

may be damaged, and may cause

center .

If the abnormity still exists, the unit

electric shock or fire.

Don't operate the air conditioner

with wet hands.

Otherwise, it can cause an electric

shock or fire.

Never cut off or damage power

cables and control wires. If the power

cable and signal control wire were

damaged, change them by professional

Power must adopts the special

circuit to prevent fire.

Otherwise, it can cause an electric

shock or fire.

Be sure to pull out the power

plug as the air conditioner not in use

for a long time.

Otherwise, the accumulated dusts

that may cause overheating or fire.

Never damage the electric wire

or use the electric wire, which is not

appointed.

Otherwise, it will cause overheating

or fire.

When cleaning, it is necessary

to stop driving and turn off the power

supply.

Cut off power supply

Otherwise, it may cause electric

shock or damage.

Rated voltage of this air cond-

itioner 230V, with a tolerable fluctu-

ation at The compressor

will vibrate sharply if the voltage is

too low, resulting in damage to

refrigerating system. Electrical

elements are easy to damage

if the voltage is too high.

The power supply must adopt

the special circuit that with air switch

protection and assure it has enough

capacity. The unit will be turned on

or off according to your requirement

automatically, please do not turn on

or turn off the unit frequently, othe-

rwise disadvantage effect may be

caused to the unit.

Operation and maintenance-Notices for operation

±23V.

２

★

★★

★

５℃

★

Earth:The ground

be connected!

If not, please ask the qualified person-

nel to install. Furthermore, don't conn-

ect each wire to the gas pipe, water

pipe, drainage pipe or any other impr-

oper places.

Select the most appropriate tem-

perature.

It can preclude the electricity wasted.

Keep room cool-

er than outside

about

Don't leave windows and

doors open for a long time

while operating the air conditi-

oner.

Don't block the air intake or outlet

vents of both the outdoor and indoor

units.

Keep combustible spray away

from the units more than 1m.

It can cause fire or explosion.

It can decrease the air conditioning

capacity or cause a malfunction.

It can decrease the air conditioning

capacity.

Please note whether the install-

ed stand is firm enough.

If it is damaged, it may lead to

the fall of the unit and cause

injury.

As falling off the outdoor unit

can be dangerous.

Don't step on the top of the

outdoor unit or place something

on it.

Don't attempt to repair

the air conditioner by yourself.

The wrong repair will lead to

electric shock or fire, so

you should contact with the service

center repairing.

Notices for use

★

The temperature of refrige-

rant circuit will be high, please

keep the interconnection cable

away from the copper tube.

The appliance shall not be

installed in the laundry.

３

★

Don't blow the wind to animals and plants

directly. It can cause bad influence to them.

Don't insert your hands or stick into the air

intake or outlet vents.

Splashing water on the air conditioner can

cause electric shock and malfunction.

Don't place heater near the air

conditioner.

Or CO toxicosis may occur for imcomplete

burning.

Don't apply the cold wind to the body for a

long time.

It can cause the health problems.

Don't use the air conditioner for other purposes,

such as drying clothes, preserving foods, etc.

Notices for use

To adjust the airflow and direction appropriately.

At operating the louvers of air conditioner could be

adjusted by pressing the SWING button on wireless

remote control to change the airflow direction.

Guide louver

The power cords of this air conditioner adopt

Y-type connection, please don't cut off or damage

the power cords and control cords. If they are

damaged, please ask the qualified personnel to

If the supply cord is damaged,it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid a hazard.

change them.

Models and specifications

Air volume （ｍ３／ｈ）

Model

Function

Cooling capacity (W)

Heating capacity(W)

Rated voltage(V)

Cooling/heating rated current(A)

Max. input current(A)

Cooling/heating rated power(W)

Max. input power (W)

Refrigerant volume (kg)

Water proof level

(Indoor/outdoor)outline dimensioon

Climate type

Isolation

(Indoor/outdoor)weight (kg)

(WXHXD) cm

Noise(indoor/outdoor)dB(A)

80.5×28.0×18.0

95.0×84.0×41.2

If there is any change, please see the nameplate for actual data.

＊

（３２℃／２３℃，４３℃／２６℃）

＊

Rated frequency

Cooling only

50Hz

220-240V~

1650×2

39 /59

480×2

1300×2/－－

R22 1.1×2

IP24

9×2 / 72

４

Indoor unit:

Outdoor unit:

The above parameters are tested according to GB/T7725-2004, moreover, the cooling capacity, heating capacity, noise index are tested before leaving factory;

The max. input power are tested under the max. cooling condition （２７℃／－－，２４℃／１８℃）

and max. heating condition

Cooling and heating Cooling and heating Cooling only Cooling and heating

R407C 1.2×2

R410A 1.2×2

9×2 / 72 9×2 / 72 9×2 / 72 9×2 / 72

39 /59 39 /59

R221.25×2R410A 1.3×2

480×2480×2480×2480×2

1650×2

／

1650

×2

1750×2

／

1500

×2

1600×21600×2

／

1560

×2

1300×2/1350×2 1350×2/1350×2 1250×2/－－ 1250×2/1250×2

9.3×2 9.3×2

／

9.3

×2

9.9×2

／

8.2

×2

9.0×2 9.0×2

／

8.6

×2

6.1×2/－－ 6.1×2

／

6.5

×2

6.5×2

／

6.5

×2

5.6×2/－－ 5.6×2

／

5.6

×2

3700×23700×23700×2

3500×23500×2 3500×2 3500×23500×2

GWCN24(12×2)B9NK1BA GWHN24(12×2)B9NK1BAGWHN24(12×2)B9NK2BAGWCN24(12×2)B9NK3BA

GWHN24(12×2)B9NK3BA

５

★

24℃

-５℃

27℃

4３℃

21℃

18℃

Notices for operation

Working principle and special functions for cooling

Principle:

Air conditioner absorbs heat in the room and transmit to outdoor and discharged,

so that indoor ambient temperature decreased, its cooling capacity will increase

or decrease by outdoor ambient temperature.

Anti-freezing function

If the unit is running in COOL mode and in low termperature, there will be frost formed

on the heat exchanger, when indoor heat exchanger temperature decreased below 0℃,

the indoor unit microcomputer will stop compressor running and protect the unit.

Working principle and special functions for heating

Principle:

The unit absorbs heat from outdoor air, carrys and emits the heat in indoors

to make indoor air temperature higher. Its heating capacity would be lower

according to the low weather of outdoor ambient.

This heating air circulation system can enhance the indoor temperature

in a short while.

If outdoor temperature got lower, please operate with the other heating ventilating

equipments.

Defrosting:

When outdoor temperature is low but with high humidity, after a long while running,

frost will form on outdoor unit, that will affect the heating effect, at this time,

the auto defrosting function will act, the heat running will stop for 8-10mins.

During the auto defrost, the fan motors of indoor unit and outdoor unit will stop.

During the defrost, the indoor indicator flashes, the outdoor unit may emit vapor.

This is due to the defrosting, it isn't malfunction.

After defrost finished,the heating will recover automatically.

Anti-freezing function:

In "HEAT" mode, under the following three states, if indoor heat exchanger didn't reach certain

temperature, indoor fan would not operae to prevent blowing out cool air:

(Within 3mins)

1.Heating starts. 2.Afer Auto defrosting finished. 3.Heating under the low temperature.

The conditions of unit can't normally run

The following temperature range protection device may act, that may cause stop running.

"HEAT"

running

Under the relative humidity above 80%( doors and windows opened) when cooling or dehu-

midifying for a long time, there will be dew drip off near the air vent.

"COOL"

running

"DRY"

running

Outdoor temp above

Outdoor temp below

Indoor temp. above

Outdoor temp above

Indoor temp. below

６

Indoor unit

Outdoor unit

⑸

⑷⑹

⑺

⑻

Ａｉｒｉｎ

⑽

⑴

⑶

⑼

⑵

⑴Manual switch

Wireless remote control

Names and functions of each part

Air in

Air out

⑷Filter

⑸Guide louver

⑹Wall pipe

⑺Bind tape

⑻Receiving window

⑼Connection wire

⑵Indicator

⑽Drainage pipe

⑶Front panel

DRY

SET TEMP

RUN

COOL

HEAT(only for cooling and heating

type unit)

Air out

７

●

１℃，按

●

Operation of wireless remote control

Name and function of wireless remote control

Note: Be sure that there are no obstructions between receiver and remote controller;

Don't drop or throw the remote control; Don't let any liquid in the remote control and

put the remote control directly under the sunlight or any place where is very hot.

Signal transmitter

Temperature button

TEMP.

Remote control

ON/OFF

MODE Mode button

ON/OFF button

Press this button, the unit will start to run,

when repressed, the unit will stop to run.

Press this button, the running mode will change

as below.

AUTO

COOL

DRY

FAN

Only for cooling and heating unit

FAN Fan speed button

Press this button once, fan speed will change

as follow:

AUTO

Low fan

Middle fan

High fan

FAN Fan speed button

When pressing+, the setting temperature

will be increased , when pressing -,

the setting temperature will be decreased

(When continuously press and holding

１℃

+ or-button, the temperature will be changed

quickly). The temperature setting range is 16-30

℃

COOL

HEAT

COOL button

HEAT button

At operating, pressing this button could

enter into the COOL mode directly.

At operating, pressing this button could

enter into the HEAT mode directly.

Pressing this button once the guide louver

will start swinging at certain angle, when

repressed, it will stop swinging.

Pressing this button, will display the last Timer

setting, and sample of Hour Off (On) will flash.

At this time, to press + or - button could adjust

the Timer (when continuously press and holding

+ or - button, the time value will be changed

swiftly) the setting range is 0.5-24hours; when

pressing this button again to confirm the time,

to send relevant information by the wireless

remote control immediately, then the sample

of Hour Off (On) will not flash anymore. If it is

flashing, and the TIMER button hasn't been

pressed, it will quit the Timer setting after 10s.

At operating, press this button could set Timer

off; When the unit is stopped, press this button

could set Timer on. If the time has been confirmed,

and repress this button will cancel the TIMER.

TIMER TIMER button

８

●



●

Operation of wireless remote control

Names and functions of wireless remote control

This wireless remote control is general, and it could be used for many units, some buttons

of this control which are not available to this unit will not be described below.

Wireless remote control

SLEEP

TURBO button

TURBO

At COOL and HEAT mode, press this button

could set TURBO ON (and displays "TURBO")

or OFF ("TURBO" disappear).

After powered on, it is default to TURBO

OFF. At AUTO, DRY, FAN mode, the TURBO

function cannot be set, and there is no

"TURBO" displayed.

BLOW BLOW button

SLEEP

At COOL and DRY modes, press this button, could

set BLOW ON (and Displays the "BLOW") or OFF (the

"BLOW" will disappear). After powered on,that is default

to BLOW OFF. At AUTO, FAN or HEAT modes, the

BLOW function cannot be set, and there is no "BLOW"

displayed.

Pressing this button, enter into SLEEP state or

quit the SLEEP state. After unit is turned off and

cancel the SLEEP function. At FAN and AUTO

mode, the SLEEP function cannot be set.

It is for SLEEP.

At COOL, DRY mode: Enter into SLEEP state

and after one hour running later, the temp. of

main unit be increased 1 , 2hours later, the

setting temp. will be increased 2 , after pressing

this button, the unit normally runs at the setting

temp.

In HEAT mode: After entered the SLEEP mode

and run for 1hour later, the temperature of main

unit will be decreased 1 , 2hours later, setting

temperature will be decreased 2

, after pressing

this button, the unit normally runs at the setting

temp. After SLEEP mode is set up, the setting

of wireless remote control will not change.



Light LIGHT button

Pressing this button, can select the Light On

and Light Off.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gree Klimaanlage Handbücher

Gree

Gree 4LIV09 Bedienungsanleitung

Gree

Gree GPA05AK Bedienungsanleitung

Gree

Gree G17-10ESHWAC-CA Bedienungsanleitung

Gree

Gree GMV-Q224WM/B-X Bedienungsanleitung

Gree

Gree G1407R Bedienungsanleitung

Gree

Gree ForestAir 13-04588 Bedienungsanleitung

Gree

Gree GEH09AA-K6DNA1E/I Bedienungsanleitung

Gree

Gree GMV-ND22ZA/A-T Bedienungsanleitung

Gree

Gree GJC08BK-A6NRNC5B Bedienungsanleitung

Gree

Gree GWC09QB-K3DNB2B Bedienungsanleitung

Gree

Gree GIS409AE Bedienungsanleitung

Gree

Gree GUD71PH/A-T Bedienungsanleitung

Gree

Gree GWH09KF-A3DNB1A Bedienungsanleitung

Gree

Gree UML600H/A-MP Bedienungsanleitung

Gree

Gree GWH09UC-D3DNA4AGWH12UC-D3DNA4AGWH18UC-D3DNA4A Bedienungsanleitung

Gree

Gree TTW Series Bedienungsanleitung

Gree

Gree Neo COZY9K Bedienungsanleitung

Gree

Gree TOSOT MOMA-19 Bedienungsanleitung

Gree

Gree GWH(09)KF-K3DNA6E/I Bedienungsanleitung

Gree

Gree GWC09QB-K3DNA1B Bedienungsanleitung

Gree

Gree MULTI18HP230V1AO Bedienungsanleitung

Gree

Gree G17-8PACSW Bedienungsanleitung

Gree

Gree GEH09AA-K6DNA1F/I Bedienungsanleitung

Gree

Gree GWH28AAE-K3NNA1A Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung