Gree XK86 Bedienungsanleitung

Owner's Manual

Original Instructions

Wired Controller (XK86 and XE76-33/H)

To Users

Thank you for selecting Gree’s product. Please read this instruction manual

carefully before installing and using the product, so as to master and correctly use the

product. In order to guide you to correctly install and use our product and achieve

expected operating effect, we hereby instruct as below:

(1) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsibility for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

(2) This instruction manual is a universal manual, some functions are only

applicable to particular product. All the illustrations and information in the

instruction manual are only for reference, and control interface should be

subject to actual operation.

(3) In order to make the product better, we will continuously conduct

improvement and innovation. We have the right to make necessary revision

to the product from time to time due to the reason of sales or production, and

reserve the right to revise the contents without further notice.

(4) For personal injury or property loss and damage caused by improper

operation such as improper installation and debugging, unnecessary

maintenance, violation of related national laws and rules and industrial

standard, and violation of this instruction manual, etc., we will bear no

liability.

(5) The final right to interpret for this instruction manual belongs to Gree Electric

Appliances Inc. of Zhuhai.

This marking indicates that this product should not be disposed

with other household wastes throughout the EU. To prevent

possible harm to the environment or human health from

uncontrolled waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To return your used

device, please use the return and collection systems or contact

the retailer where the product was purchased. They can take

this product for environmental safe recycling.

Contents

1 Safety Notices (Please be sure to abide them) .................1

2 Operation Notices................................................................2

3 Appearance and Display .....................................................4

4 Status Bar Instructions .......................................................5

5 Installation and Commissioning.........................................7

5.1 Installation of Wired Controller ...............................................11

5.2 Commissioning ..................................................................... 20

6 Operation Instructions ......................................................30

6.1 On/Off ................................................................................... 30

6.2 Mode Setting......................................................................... 31

6.3 Temperature Setting.............................................................. 33

6.4 Fan Setting ........................................................................... 34

6.5 Schedule Setting................................................................... 35

6.6 Function Setting .................................................................... 40

6.7 Service Hotline Query ........................................................... 51

6.8 Language Setting.................................................................. 52

6.9 Sound Setting ....................................................................... 52

6.10 Date and Time Setting......................................................... 52

6.11 Remote Shield Function ...................................................... 52

6.12 Gate-control Function.......................................................... 53

6.13 Inquiry of Indoor Temperature with One Button ................... 53

7 Error Display ......................................................................53

7.1 Table of Error Codes for Outdoor Unit ................................... 54

7.2 Table of Error Codes for Indoor Unit...................................... 56

7.3 Table of Debugging Codes .................................................... 59

7.4 Table of Status Codes ........................................................... 61

Wired Controller (XK86 and XE76-33/H)

1 Safety Notices (Please be sure to abide them)

WARNING: If not abide them strictly, it may cause severe damage to the unit or the

people.

NOTE: If not abide them strictly, it may cause slight or medium damage to the unit or the

people.

This sign indicates that the items must be prohibited. Improper operation may cause

severe damage or death to people.

This sign indicates that the items must be observed. Improper operation may cause

damage to people or property.

WARNING!

This product can’t be installed at corrosive, inflammable or explosive

environment or the place with special requirements, such as kitchen.

Otherwise, it will affect the normal operation or shorten the service life of the

unit, or even cause fire hazard or serious injury. As for the above special

places, please adopt special air conditioner with anti-corrosive or

anti-explosion function.

Wired Controller (XK86 and XE76-33/H)

2 Operation Notices

The power supply for all indoor units must be unified.

Prohibit installing the wired controller at wet or sunshine places.

Do not knock, throw or frequently disassemble the wired controller.

Do not operate the wired controller with wet hands.

When the system mode priority is the master-slave mode, in one system network,

you must set one indoor unit as the master indoor unit, Other indoor units are slave

indoor units .

When the system mode priority is the master-slave mode, the operation mode of

the system is basing on that of the master indoor unit. The master indoor unit can

be set to any mode (including auto mode), while the slave indoor unit can’t set to

the mode that conflicts with the system mode.

When the system mode priority is: Cooling mode is prioritized, heating mode is

prioritized, first-set mode is prioritized, or last-set mode is prioritized. The indoor

unit can be set to any mode (excluding auto mode). The indoor unit will

automatically switch to the system mode, when the operation mode of the indoor

unit conflicts with the system operation mode.

When the system mode priority is the voting mode (indoor unit’s capacity is

prioritized / number of indoor units is prioritized). The indoor unit can be set to any

mode (excluding the auto mode). The indoor unit will be stopped, when the

operation mode of the indoor unit conflicts with the system operation mode after

voting.

Wired Controller (XK86 and XE76-33/H)

System mode priority defaults to master-slave mode, and only certain units have

other system mode priorities.

When two wired controllers control one (or more) indoor unit(s), the address of

wired controller should be different.

Functions with “*” are optional for indoor units. If a function is not included in an

indoor unit, wired controller can’t set the function, or setting of this function is

invalid to the indoor unit.

Wired Controller (XK86 and XE76-33/H)

3 Appearance and Display

Fig.3.1 Appearance and display

Wired Controller (XK86 and XE76-33/H)

Table 3.1 Appearance and display instructions

No.

Name

Instructions

1 LED Light up when buttons are pressed or signals are

received from remote controller

2 Remote signal receiving

window

For receiving signals from remote controller

3 Mode display Indicating the operating mode

4 Names of buttons Indicating the names of buttons

5 Touch buttons Corresponding to the names of buttons

6 Temperature display Display set temperature or environment temperature

7 Fan speed display Indicating set fan speed

Status bar

Indicating date, time, and activated functions

4 Status Bar Instructions

Table 4.1 Status bar instructions

Icon

Name

Instructions

Up and down

swing Up and down swing

Left and right

swing Left and right swing

Master

If the current wired controller is connected with a master indoor

unit, this icon will be displayed (If it is connected with a heat

recovery unit or temperature-humidity dual-control duct type

indoor unit, this icon won’t be displayed)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Gree Controller Handbücher

Gree

Gree CE54-24/F(C) Bedienungsanleitung

Gree

Gree XK-19 Bedienungsanleitung

Gree

Gree XK75 Bedienungsanleitung

Gree

Gree XK-19 Bedienungsanleitung

Gree

Gree XK60 Bedienungsanleitung

Gree

Gree CE53-24/F(C) Bedienungsanleitung

Gree

Gree ME20-24/D1(T) Bedienungsanleitung

Gree

Gree XE73-44/E Bedienungsanleitung

Gree

Gree XK55 Bedienungsanleitung

Gree

Gree LE60-13/C1 Bedienungsanleitung

Gree

Gree XK76 Bedienungsanleitung

Gree

Gree XK41 Bedienungsanleitung

Gree

Gree XK55 Bedienungsanleitung

Gree

Gree CE52-24/F(C) Bedienungsanleitung

Gree

Gree XE70-13/E Bedienungsanleitung

Gree

Gree CE53-24/F(C) Bedienungsanleitung

Gree

Gree XK60 Bedienungsanleitung

Gree

Gree CE55-24/F Bedienungsanleitung

Gree

Gree XK49 Bedienungsanleitung

Gree

Gree XE70-33/H Bedienungsanleitung

Gree

Gree XK46 Bedienungsanleitung

Gree

Gree CE50-24/E Bedienungsanleitung

Gree

Gree XK46 Bedienungsanleitung

Gree

Gree XE71-42/G Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch