Gree ME30-24/F1 K Bedienungsanleitung

S2S KNX Gateway

Model:

ME30-24/F1(K)

To Users

Thank you for selecting Gree product. Before installing the product, please

read this instruction manual carefully to know well about the product and use it

correctly. In order to install and use the product correctly to reach the expected

operational effect, the following instructions are hereby issued:

(1)The appliance is not intended to be used by the people with physical,

sensory or mental handicap or the people without using experience and

knowledge (including children), except that they are supervised or guided by a

person responsible for their safety when using the appliance. Children should be

supervised to ensure that they do not play with the appliance.

(2)This instruction manual is a general version, some functions are only

applicable to specific product, so all the illustrations and information in the

instruction manual are only for reference, the control interface should be subject

to the actual product.

(3)In order to better meet the customers’ demand, our company will

improve the product continuously and we have the right to conduct necessary

modification at any time due to the reason of sales or production, and will

reserve the right of modication without further notication.

(4)We will bear no responsibility for the personal injury, property loss or

damage of equipment due to improper installation and debugging, unnecessary

maintenance, non-observance of related national laws, regulations, and

industrial standards, violation of any stipulations of this instruction manual, etc.

(5)The final authority for the interpretation of this instruction manual

belongs to Gree Electric Appliances, Inc. of Zhuhai.

CONTENTS

1 User Notices..............................................................................1

2 Display.......................................................................................3

3 Introduction to Functions ...........................................................4

4 Wire Connection and Installation...............................................6

5 ETS5 Conguration ...................................................................9

6 ETS System Parameters......................................................... 11

7 Instruction of KNX Communication Objects ............................ 18

8 Product Specication...............................................................29

9 Error Code...............................................................................31

S2S KNX Gateway

1 User Notices

Distinguished users:

Before installing or use this appliance, please read this instruction manual

carefully, and install and use according to the process stipulated in the instruction

manual.

The following marks should be specially noted:

Warning! It means misoperation may cause personal casualty or

severe injury.

Caution! It means misoperation may cause damage of unit.

Warning!

(1) It should be installed by professional personnel, improper installation

may cause re or electric shock.

(2) Insert the socket only after ensuring the socket of power cord is dry and

clean.

(3) Before touching the electric components, please make sure that the

appliance is power-failed.

(4) Please do not touch this appliance with wet hands, which may cause

electric shock.

(5) Please use the power cord with designated specication; poor contact or

improper installation may cause re hazard.

(6) Power of this equipment is supplied by IDU of air conditioner; it is not

allowed to connect other power source into this equipment, otherwise it may

cause re hazard and damage the appliance.

(7) For the equipment with power plug, the power socket should be installed

near the equipment for convenient using.

S2S KNX Gateway

(8) Please do install the appliance inside the inapproachable and locked

electric control cabinet indoors.

(9) Please install this appliance in the place where is without interference of

electromagnetic wave or dust.

Caution!

(1)It is not allowed to install the equipment in wet place or under direct

sunlight.

(2) Please make sure that the equipment is installed in the correct position,

otherwise it may cause communication error.

(3) Make sure that the communication wire is connected into the correct

interface, otherwise it may cause communication error.

(4) After connecting the wires, please use insulated adhesive tape to protect

the wire to prevent oxidation or short circuit.

(5) Requirement for normal working environment of S2S KNX Gateway:

①Temperature: 0℃~ +45℃;

②Humidity: less than 85%, except for the condensation of dew;

③It should be installed inside the electric control cabinet and prevent direct

sunlight, rain, snow, etc.

(6) All the illustrations in the instruction manual are only for reference.

S2S KNX Gateway

2 Display

H2 H1

Fig.2.1

S2S KNX Gateway can connect Gree air conditioner into KNX system.

Compatibility:

All IDUs of GMV5 series for export.

Major features:

(1) Save space, it is installed inside the electric control cabinet;

(2) Fast and concealed installation;

(3) No need to supply extra power;

S2S KNX Gateway

(4) Can directly connect to KNX EIB bus bar;

(5) Can directly connect to Gree IDU;

(6) Multiple controllable objects (including different types: bit, byte…)

(7) Support 4 preset scenes;

(8) Can be monitored via KNX bus bar, including status and error

information of air conditioner.

3 Introduction to Functions

3.1 Indicators

HBS indicator: if the communication between S2S KNX Gateway and the

unit is normal, the HBS indicator will be on constantly; if there is communication

error between S2S KNX Gateway and the unit, the indicator is off.

RUN indicator: if the S2S KNX Gateway works normally, RUN indicator

ashes.

Prog. indicator: when the indicator is on, it means the S2S KNX Gateway

is under programming status; when the indicator is off, it means the S2S KNX

Gateway quits programming status.

3.2 Functional Dial Codes

Setting area of S2S KNX Gateway DIP switch is located inside the product.

The first knob of functional dialer S1 is used for setting the master and

slave HBS equipment, after altering the setting of master and slave HBS

S2S KNX Gateway

equipment, it will come into force only after re-energizing the gateway. When the

rst bit is in number end, it is set as master HBS equipment, when the rst bit is

in ON end, it is set as slave HBS equipment.

The second bit of functional dialer S1 is reserved.

master HBS equipment slave HBS equipment

Remark: the default S2S KNX Gateway is master HBS equipment. When

there is multiple equipment in the HBS bus bar, it is recommended to set the S2S

KNX Gateway as slave equipment, the wired controller as master equipment.

S2S KNX Gateway

3.3 Program Button

H2 H1

Fig.3.3

Program button: as shown in the above picture, it is used for making the

S2S KNX Gateway enter/quit programming status. When the physical address

of equipment is altered via ETS5, please press the program button (ETS5 will

prompt) to make the S2S KNX Gateway enter into program status (module

program indicator is on).

4 Wire Connection and Installation

Connect to IDU:

First, cut off the power of IDU. Open the interface panel of IDU and nd the

HomeBus wire terminals (H1, H2), and use twisted pair to connect the H1 and

Inhaltsverzeichnis

Andere Gree Tor Handbücher

Gree

Gree ME30-24/E5 Bedienungsanleitung

Gree

Gree ME30-24/E6 Bedienungsanleitung

Gree

Gree VRF Bedienungsanleitung

Gree

Gree ME30-44/D2 B Bedienungsanleitung

Gree

Gree ME30-24/E6 Bedienungsanleitung

Gree

Gree TDmetal Modbus Gateway Bedienungsanleitung

Gree

Gree ME30-24/D1(BM) Bedienungsanleitung

Gree

Gree ME30-24/E5 Bedienungsanleitung

Gree

Gree GRJW05-J Bedienungsanleitung

Gree

Gree GMV BACnet Betriebsanleitung

Gree

Gree MG30-24/D1(B) Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung