Greenheck No Flow Duct Smoke Detector Bedienungsanleitung

NO FLOW DUCT

SMOKE DETECTOR

Purpose/Application

National and local safety standards and codes recognize the

ability of air duct systems to transfer smoke, toxic gases, and

ﬂame from area to area. Sometimes smoke can be of such

quantity as to be a serious hazard to life safety unless blowers

are shut down and dampers are actuated. The primary purpose

of duct smoke detection is to prevent injury, panic, and property

damage by reducing the spread (recirculation) of smoke. The

detector samples air currents passing through a duct and

gives dependable performance for management of smoke and

combination ﬁre smoke dampers. Duct smoke detection can

also serve to protect the air conditioning system itself from ﬁre

and smoke damage.

There are several important documents that provide guidance

concerning the performance, application and installation of duct

detectors:

1) NFPA Standard 90A, Installation of Air Conditioning

and Ventilation Systems

2) NFPA Standard 92A, Recommended Practice for

Smoke Control Systems

3) NFPA Standard 72, National Fire Alarm Code

4) NFPA Standard 101, Life Safety Code

5) UL Standard 268A, Standard for Smoke Detectors for

Duct Applications

6) ASHRAE Handbook and Product Directory, “Fire and

Smoke Control”

7) System Sensor, Guide for Proper Use of Smoke

Detectors in Duct Applications.

Duct detectors are:

NOT a substitute for an open area smoke detector

NOT a substitute for early warning detection

NOT a replacement for a building’s regular ﬁre detection

system

Speciﬁcations

Type: Photoelectric

Air Duct Velocity: 0 to 3000 fpm (0 to 15.2 m/s)

Operating Temperature Range: 32°F to 120°F (0° to 49°C)

Operating Humidty Range: 10% to 93% RH

Operation Voltage: 120 VAC

Features

•Designed for mounting on standard electrical box

• Low-proﬁle smoke detector design

• Field adjustable sensitivity

• Built-in test switch

Listings

UL 268A

Refer to Greenheck Installation Supplement: Part # 465915- No

ﬂow smoke detector IOM

#10 TEK SCREW

4 X 4 X 2 1/8 HANDI BOX

SMOKE DETECTOR ASSEMBLY

Sleeve Length

Height less than 11 in. (279mm): 21 in. (533mm) sleeve with

12 in. (305mm) “A” dimension

Height equal to or greater than 11 in. (279mm): 16 in. (406mm) sleeve with

9.5 in. (241mm) “A” dimension

Ordering Options

Factory Mounted

Smoke detector will be wired to a 4 x 4 handi-box. The closure device (if RRL or TOR) will also be wired to the

handi-box. Dampers provided with the smoke detector option will include single point wiring as standard (includes

RRL, OCI, TOR, and detectors).

Shipped Loose

Shipped loose smoke detector will only include the detector itself (no mounting hardware or bracket seals). Note:

Dampers ordered with shipped loose smoke detectors will have the standard sleeve length, not a longer sleeve to

accommodate the smoke detector installation. If smoke detectors are intended to be ﬁeld mounted on the damper

sleeve, the damper sleeve length and ‘A’ dimension will need to be manually changed to the requirements indicated

under ‘Sleeve Length’.

WHITE

MOTOR

BLACK

OCI

YELLOW

SWITCH #1

SWITCH #2

BLUE

RED

BLUE

BLACK

RED

WHITE

MOTOR

BLACK

ORANGE

BLACK

RRL

BLUE

RED

BLUE

BLACK

RED

Wiring Diagrams

RRL

OCI

Wiring Diagrams

(PRIMARY)

WHITE

MOTOR

SWITCHING DEVICE

(BY OTHERS)

L1 (OVERRIDE)

BROWN

BLACK

ORANGE

BLACK

TOR

YELLOW

SWITCH #1

SWITCH #2

WHITE

BLUE

RED

BLUE

BLACK

RED

WHITE

MOTOR

BLACK

ORANGE

BLACK

RRL/OCI

BLUE

RED

BLUE

BLACK

RED

YELLOW

SWITCH #2

SWITCH #1

RRL/OCI

TOR

Wiring Diagrams with

EP Switch

BLACK

ORANGE

RRL

BLUE

RED

BLUE

BLACK

RED

E/P SWITCH

WHITE

RED RED

BLACK

RRL

Wiring Diagrams with

EP Switch continued..

(PRIMARY)

WHITE

SWITCHING DEVICE

(BY OTHERS)

L1 (OVERRIDE)

BROWN

BLACK

ORANGE

BLACK

TOR

YELLOW

SWITCH #1

SWITCH #2

WHITE

BLUE

RED

BLUE

BLACK

RED

E/P SWITCH

WHITE

RED RED

BLACK

WHITE

OCI

YELLOW

SWITCH #1

SWITCH #2

BLUE

RED

BLUE

BLACK

613

RED

E/P SWITCH

RED RED

BLACK

WHITE

OCI

YELLOW

SWITCH #1

SWITCH #2

BLUE

RED

BLUE

BLACK

613

RED

E/P SWITCH

RED RED

BLACK

OCI

RRL/OCI

TOR

No Flow Smoke Detector Rev. 3 Sept 2007

Inhaltsverzeichnis

Andere Greenheck Rauchmelder Handbücher

Greenheck

Greenheck FSDR-XXX Montageanleitung

Greenheck

Greenheck Combination Fire Smoke Dampers SSFSDR-511 Bedienungsanleitung

Greenheck

Greenheck Duct SD Bedienungsanleitung

Greenheck

Greenheck Smoke Dampers SMD-203 Bedienungsanleitung

Greenheck

Greenheck Smoke Dampers SSSMDR-501 Bedienungsanleitung

Greenheck

Greenheck Smoke Dampers SMD-401M Bedienungsanleitung

Greenheck

Greenheck Combination Fire Smoke Damper SEFSDR-511 Bedienungsanleitung

Greenheck

Greenheck FSD Series Betriebsanleitung

Greenheck

Greenheck DH100ACDCLP Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung