Greenheck BR-30 Series Bedienungsanleitung

Application and Design

The BR-30 series is an eccentrically pivoted backdraft damper for low velocity systems. BR-30 series is a vertical mounted

damper and designed to allow horizontal airflow and prevent reverse airflow. To increase sensitivity and reduce blade mounted

counterbalance, the blade skin is formed aluminum. On-blade counterweights are provided to fine tune start-to-open and full

open blade operation. Ball bearings minimize friction.

Recommended Applications:

• Gravity hood intake and exhaust

• Stairwell pressurization

• Room pressurization

• Ductwork outlets

Poor Applications:

• Propeller fan outlets (high velocity)

• Centrifugal fan outlets (high velocity)

• Building pressurization (sensitive to wind)

• Pressure relief exceeding 0.13 in. wg (32 Pa)

Ratings

Back Pressure: 2.0 in. wg (500 Pa)

Start-to-Open Pressure: 0.05 in. wg (12 Pa)

Velocity: 2000 fpm (10.2m/s)

Temperature: 180°F (82ºC)

Standard Construction

Frame: Insert mount 16 ga. (1.5mm) galvanized steel

hat channel

Blades: 0.063 in. (1.6mm) thick formed aluminum,

eccentrically pivoted

Axles: 3

/8in. (9.5mm) square plated steel

Bearings: Galvanized steel press-fit ball

Linkage: Side mounted (out of airstream)

Blade Seals: Pressure activated vinyl

Counterbalance: Blade mounted with adjustable

weights

Size Limitations

Minimum Size: 8 in. W x 6 in. H

(203mm x 152mm)

Maximum Panel Size: 48 in. W x 74 in. H

(1220mm x 1880mm)

Options

• EPDM segmented jamb seals

• Stainless steel or aluminum frame

• Stainless steel axles and linkage

• Type 316 ball bearings with acetal races

• Selectable start open from .05 to .13 in. wg (12 Pa - 32 Pa)

BR-30 SERIES

Vertical Mount Horizontal Airflow

BAROMETRIC RELIEF DAMPER

ADJUSTABLE COUNTERBALANCE

DAMPERS AND LOUVERS

*W & H dimensions furnished approximately 1

/4in.(6mm) under size.

1.5 in.

5 in.

1 in.

MAX

4 3/8 in.

MAX

1.5 in.

BR-30

No flange

BR-31

Flange on

Discharge

BR-32

Flange on

Intake

Airflow

Specifications

Barometric backdraft dampers meeting the following specifications shall be furnished and installed where shown on plans

and/or as described in schedules.

Dampers shall consist of: 16 ga. (1.5mm) insert mount galvanized steel hat channel frame with 5 in. (127mm) depth; blades

from 0.063 in. (1.6mm) thick formed aluminum, eccentrically pivoted; 3⁄8in. (9.5mm) square plated steel axles with galvanized

steel press-fit ball bearings; damper shall be equipped with pressure activated vinyl blade seals; and internal plated steel

blade-to-blade linkage with blade mounted counterbalance weights.

Damper manufacturer's printed application and performance data including pressure, velocity and temperature limitations

shall be submitted for approval showing damper suitable for pressures to 2 in. wg (500 Pa), velocities to 2000 fpm (10.2m/s)

and temperatures to 180°F (82ºC). Testing and ratings to be in accordance with AMCA Standard 500D.

Basis of design is Greenheck model BR-30.

Performance data results from testing a 12 in. x 12 in. and 36 in. x 36 in. damper in accordance with AMCA Standard 500D

using Figure 5.3 (fully ducted), 5.2 (ducted exhausting into an open area), and 5.5 (plenum mounted) . All data has been

corrected to represent standard air density at 0.075 lb/ft3 (1.201 kg/m3).

BR-30 SERIESPERFORMANCE DATA

BR-30 series

Rev. 1 April 2004

Damper size

12 in. x 12 in.

Damper size

36 in. x 36 in.

Velocity (fpm)

Pressure Loss ( in. wg)

Velocity (fpm)

Pressure Loss ( in. wg)

Inhaltsverzeichnis

Andere Greenheck Dunstabzugshaube Handbücher

Greenheck

Greenheck KFD Series Bedienungsanleitung

Greenheck

Greenheck FGI Series Bedienungsanleitung

Greenheck

Greenheck TCB Bedienungsanleitung

Greenheck

Greenheck Steel Airfoil Blades OFSD-311 Bedienungsanleitung

Greenheck

Greenheck FSD Series Betriebsanleitung

Greenheck

Greenheck Vektor-MH Bedienungsanleitung

Greenheck

Greenheck Centrifugal Roof Exhaust Fans NYB Bedienungsanleitung

Greenheck

Greenheck Smoke Dampers SMD-301V Bedienungsanleitung

Greenheck

Greenheck Combination Fire Smoke Dampers SSFSD-211 Bedienungsanleitung

Greenheck

Greenheck Vektor-M Compact ERS Bedienungsanleitung

Greenheck

Greenheck UL555S Leakage Class I SMDR-501 Bedienungsanleitung

Greenheck

Greenheck Steel Airfoil Blades SMD-301M Bedienungsanleitung

Greenheck

Greenheck SEFSD Series Bedienungsanleitung

Greenheck

Greenheck Multi-blade Fire Damper DFD-M210 Bedienungsanleitung

Greenheck

Greenheck UL 762 Betriebsanleitung

Greenheck

Greenheck Vektor-H Bedienungsanleitung

Greenheck

Greenheck Steel 3V Blades OFSD-212 Bedienungsanleitung

Greenheck

Greenheck Series L Bedienungsanleitung

Greenheck

Greenheck Smoke Dampers SMD-401 Bedienungsanleitung

Greenheck

Greenheck Steel Airfoil Blades FSD-311V Bedienungsanleitung

Greenheck

Greenheck MSX Bedienungsanleitung

Greenheck

Greenheck Extruded Backdraft Damper EM-40 Bedienungsanleitung

Greenheck

Greenheck Stainless Steel 3V Blades SEFSD-211 Bedienungsanleitung

Greenheck

Greenheck Centrifugal Sidewall Exhaust Fans CW/CWB Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch