Greenlee 93-603 Benutzerhandbuch

Read and understand this material before operating this

meter. Failure to understand how to safely operate the meter

could result in an accident causing serious injury or death.

This meter should only be operated by qualified personnel.

93-603 MULTIMETER

OPERATION, MAINTENANCE AND

SAFETY INSTRUCTIONS

Español; p. 22

Français; p. 43

DCV

OHMh

BATT TEST

OFF

ACV

20A mA COM VΩBAT

Safety Alert Symbol ........................................................................................3

Safety Information ...................................................................................... 4-5

Description......................................................................................................6

Features ..........................................................................................................7

Operation

Preparation for Use ....................................................................................8

Voltage Measurement ................................................................................9

Current Measurement ..............................................................................10

Resistance Measurement .........................................................................11

Continuity Check ......................................................................................12

Diode Check .............................................................................................13

Battery Check ...........................................................................................14

Transistor Check ......................................................................................15

Specifications.......................................................................................... 16-19

Maintenance

Replacing the Battery or Fuse ..................................................................20

Warranty .......................................................................................................21

Spanish Version............................................................................................22

French Version..............................................................................................43

TABLE OF CONTENTS

93-603 Multimeter

Hazards or unsafe practices which, if not avoided, COULD result in minor

personal injury or property damage.

Hazards or unsafe practices which, if not avoided, COULD result in severe

personal injury or death.

Immediate hazards which, if not avoided, WILL result in severe personal

injury or death.

SAFETY ALERT SYMBOL

The symbol above is used to call your attention to instructions concerning

your personal safety. Watch for this symbol. It points out important safety

precautions. It means “ATTENTION! Become alert! Your personal safety is

involved!” Read the message that follows and be alert to the possibility of

personal injury or death.

SAVETHESE INSTRUCTIONS

Additional copies of this manual are available upon request at no extra charge.

• Do not use the meter if it is wet or damaged.

• Do not attempt to measure more than 750 VAC or 1000 VDC.

• Do not attempt to measure more than 20 amps.

• Do not connect the meter to a source of voltage or current when the

range selector is in an Ωposition, the position, the

position, or the hFE position.

Failure to observe these warnings may result in serious injury or death.

SAFETY INFORMATION

Contact with live circuits will result in severe

injury or death.

93-603 Multimeter

• Disconnect the test leads and turn the range selector to OFF before

removing the back of the case to replace the fuse or battery.

• Disconnect the test leads from the component or circuit under test

before changing the position of the range selector.

• Use only properly rated fuses when replacement is necessary.

See the Specifications section of this manual.

• Do not perform any service or maintenance other than as described

in this manual.

• Replace weak or discharged batteries as soon as either of these

conditions is detected.

• Do not expose meter to extremes in temperature or high humidity.

See Specifications section of this manual.

Failure to observe these precautions may result in injury and damage

to this instrument.

SAFETY INFORMATION (cont’d)

DESCRIPTION

The Greenlee 93-603 Multimeter is a multipurpose meter with the following measurement

functions and measurement ranges.

AC Voltage: 0–750 volts DC Current: 0–20 amps

DC Voltage: 0–1000 volts

Resistance: 0–20 megohms

Continuity Check

Diode Check

Battery Check: 1.5-volt and 9-volt batteries

Transistor Check

93-603 Multimeter

FEATURES (Fig. 1)

Fig. 1

1. Digital Display

• 3-1/2 LCD readout (maximum reading is ‘1999’)

• over-range indication (“1” or “-1” appears at far left of the display)

• automatic polarity indication

• “LB” low battery icon.

2. Range Selector

Used to select the desired function and/or range:

• AC or DC voltage • DC current

• Resistance • Continuity Check

• Diode Check • Battery Check (for 1.5-volt and 9-volt batteries)

• Transistor Check

3. Transistor Receptacle - receptacles for the emitter (E), base (B), and collector (C) leads of

NPN or PNP transistors

4. 20A Input Terminal - positive (+) input terminal for DC current measurements between

200 mA and 20 A

5. mA Input Terminal - positive (+) input terminal for DC current measurements below

200 mA

6. COM Input Terminal -

negative (-) input terminal

for voltage, current, and

resistance measurements,

and for continuity, diode,

battery, and transistor

checks

7. VΩBAT Input Terminal -

positive (+) input terminal

for voltage and resistance

measurements and for

continuity, diode, battery,

and transistor checks

OPEN

DCV

OHM

BATT TEST

OFF

ACV

20A mA COM VΩBAT

5 6

OPERATION

Preparation for Use

Before using the meter, check a functioning circuit or component. If the meter fails to perform

as expected, refer to the following troubleshooting list until the problem is solved:

1. Test leads are not fully plugged into the input terminals.

2. The test lead tips or test lead connectors are corroded.

3. The battery should be replaced.

4. A test lead is damaged.

5. The input terminals are corroded.

6. The meter needs service.

93-603 Multimeter

Disconnect the test leads from the component or circuit under test

before changing the position of the range selector.

Failure to observe this precaution may result in minor injury and/or

damage to this instrument.

Do not attempt to measure more than 750 VAC or 1000 VDC.

Failure to observe this warning may result in serious injury or death.

Contact with live circuits will result in severe

injury or death.

Voltage Measurement

1. Plug the black test lead into the COM input terminal, and plug the red test lead into the

VΩBAT input terminal.

2. Set range selector to the appropriate DCV or ACV range.

Note: When measuring an unknown voltage, start at the highest range.

3. Touch the test leads to the circuit under test and read the display.

Note: If the resolution of the reading is not satisfactory, disconnect the meter from the circuit

and switch to the next lower range. Reconnect the meter to the circuit and read the

display. Repeat this procedure until the resolution is satisfactory.

Current Measurement

Do not attempt to measure more than 20 amps.

Failure to observe this warning may result in serious injury or death.

Contact with live circuits will result in severe

injury or death.

1. Shut off and disconnect power to the circuit to be tested.

2. Open the branch of the circuit where the current is to be measured.

3. Plug the black test lead into the COM input terminal, and plug the red test lead into the

appropriate current input terminal.

Note: When measuring an unknown current, start with the red test lead plugged into the

20 A input terminal.

4. Set range selector to the appropriate DCA range.

Note: When measuring an unknown current, start at the 20 A range.

5. Connect the test leads to the circuit.

6. Apply power to the circuit under test and read the display.

Note: If the resolution of the reading is not satisfactory, shut off power to the circuit and

switch to the next lower range. Turn on the power to the circuit and read the display.

Repeat this procedure until the resolution is satisfactory.

Note: If the range selector must be changed from 20A range to the 200 mA range to obtain

finer resolution, you must also unplug the red test lead from the 20 A input terminal and

plug it into the mA input terminal.

7. Shut power off and disconnect the meter from the circuit.

8. Reconnect the circuit.

Inhaltsverzeichnis

Sprachen:

Andere Greenlee Multimeter Handbücher

Greenlee

Greenlee DM-60 Bedienungsanleitung

Greenlee

Greenlee DM-200 Bedienungsanleitung

Greenlee

Greenlee DM-40 Bedienungsanleitung

Greenlee

Greenlee SDMM-1 Bedienungsanleitung

Greenlee

Greenlee CMPL-100 Bedienungsanleitung

Greenlee

Greenlee DM-100 Bedienungsanleitung

Greenlee

Greenlee CM-1050 Bedienungsanleitung

Greenlee

Greenlee CM-1500 Bedienungsanleitung

Greenlee

Greenlee DM-60 A Bedienungsanleitung

Greenlee

Greenlee AM-6 Bedienungsanleitung

Greenlee

Greenlee DM-25 Bedienungsanleitung

Greenlee

Greenlee CMT-80 Bedienungsanleitung

Greenlee

Greenlee 93-105 Bedienungsanleitung

Greenlee

Greenlee 93-500 Bedienungsanleitung

Greenlee

Greenlee DM-200 Bedienungsanleitung

Greenlee

Greenlee DM-20 Bedienungsanleitung

Greenlee

Greenlee DM-200A Bedienungsanleitung

Greenlee

Greenlee CM-1300 Bedienungsanleitung

Greenlee

Greenlee CMP-200 Bedienungsanleitung

Greenlee

Greenlee DM-300 Bedienungsanleitung

Greenlee

Greenlee DM-860A Bedienungsanleitung

Greenlee

Greenlee DM-820A Bedienungsanleitung

Greenlee

Greenlee 93-606 Bedienungsanleitung

Greenlee

Greenlee DM-830A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung