GREENLINE IMD-C Series Bedienungsanleitung
Greenline Industrial Monitors
IMD-C Series
User Manual
2
Warning!
___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Disclaimer
This information in this document is subject to change without notice. In no event shall
Indumicro.com be liable for damages of any kind, whether incidental or consequential,
arising from either the use or misuse of information in this document or in any related
materials.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.
___________________________________
Table of contents
Chapter 1: System description
1.1 Specifications.............................................................................................................................. 1
1.2 Ordering information ................................................................................................................... 1
1.3 Features of the IMD-C series...................................................................................................... 2
Chapter 2: Touch screen configuration
2.1 Configuring a resistive touch screen (IMD-CxxxT)...................................................................... 3
2.2 Configuring a projected capacitive touch screen (IMD-CxxxPT)............................................... 15
Chapter 3: Dimension drawings
3.1 Dimension drawing IMD-C070[P]T............................................................................................25
3.2 Dimension drawing IMD-C080[P]T............................................................................................26
3.3 Dimension drawing IMD-C120[P]T............................................................................................27
3.4 Dimension drawing IMD-C150[P]T............................................................................................28
IMD-C Series User Manual 1
Chapter 1: System description
1.1 Specifications
Model IMD-C070[P]T IMD-C080[P]T IMD-C120[P]T IMD-C150[P]T
Display
Display type 7” TFT-LCD 8” TFT-LCD 12.1” TFT-LCD 15” TFT-LCD
Max. resolution 800x480 800x600 800x600 1024x768
Max. color 262K 16.2M 16.2M 16.2M
Luminance (cd/m²) 350 350 330 330
View angle (H/V) 140° / 110° 140° / 125° 160° / 140° 160° / 145°
Touch Screen
Type Resistive touch (IMD-CxxxT) / ‘Anti-scratch’ projected capacitive touch (IMD-CxxxPT)
Light transmission 80% (IMD-CxxxT) / 90% (IMD-CxxxPT)
Connectivity
Connectors 1 x USB for touch
1 x VGA
1 x DVI
1 x 3-pin terminal block for power
Power
Input voltage 9~36V DC
Power consumption Max. 2.4W Max. 4.6W Max. 7W Max. 11W
Mechanical
OSD keypad 5-key keypad located on the backside
Construction Aluminum front and chassis
IP Rating IP65 front panel
Mounting Panel mount / VESA 75 Panel mount / VESA 100
Dimensions (mm) 202 x 149 x 39 231 x 176 x 51 319 x 245 x 52 410 x 310 x 55
Environmental
Operating temperature 0~50°C
Storage temperature -20~60°C
Storage humidity 10 to 90% @ 40°C, non- condensing
Certification CE / FCC Class A
1.2 Ordering information
IMD-C070T 7” Industrial display with resistive touch screen
IMD-C070PT 7” Industrial display with projected capacitive touch screen
IMD-C080T 8” Industrial display with resistive touch screen
IMD-C080PT 8” Industrial display with projected capacitive touch screen
IMD-C120T 12” Industrial display with resistive touch screen
IMD-C120PT 12” Industrial display with projected capacitive touch screen
IMD-C150T 15” Industrial display with resistive touch screen
IMD-C150PT 15” Industrial display with projected capacitive touch screen
IMD-C-Series User Manual
2
1.3 Features of the IMD-C series
The IMD-C series feature an excellent viewing ability for monitoring and control applications.
The front panel of the display monitor is sealed with a gasket for NEMA 4/IP 65 rating when it is panel mounted
in a NEMA rated cabinet or enclosure.
The ‘T’ models are equipped with an analog resistive touch screen while the ‘PT’ models come with a projected
capacitive touch screen.
Projected capacitive touch screens are not only resistant to scratch and abrasion but also to most chemicals.
Apart from that, glass is transparent and does not impair the brilliance of the picture at all.
IMD-C070[P]T
IMD-C150[P]T
IMD-C-Series User Manual 3
Chapter 2: Touch screen configuration
2.1 Configuring a resistive touch screen (IMD-CxxxT)
PenMount Control Panel
The functions of the PenMount Control Panel are Device, Multiple Monitors ,Tools and About, which are
explained in the following sections.
Device
In this window, you can find out that how many devices are detected on your system.
Calibrate
This function offers two ways to calibrate your touch screen. ‘Standard Calibration’ adjusts most touch
screens. ‘Advanced Calibration’ adjusts aging touch screens.
Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or
stylus to touch the red squares in sequence. After the fifth red point calibration is
complete. To skip, press ‘ESC’.
Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch
panel linearity of aged touch screens. Click this button and touch the red squares
in sequence with a stylus. To skip, press ‘ESC’.
IMD-C-Series User Manual 4
To calibrate your touch screen:
1. Please select a device then click “Configure”. You can also double click the device too.
2. Click “Standard Calibration” to start calibration procedure.
IMD-C-Series User Manual 5
NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate
calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below:
3. Come back to “PenMount Control Panel”, select Device to calibrate, then click Advanced
Calibration.
NOTE: It is recommended to use a stylus during Advanced Calibration for greater accuracy.
IMD-C-Series User Manual 6
Plot Calibration Data Check this function to have touch panel linearity comparison graph appear
when you finish Advanced Calibration.
The black lines reflect the ideal linearity assumed by Penmount’s application
program while the blue lines show the approximate linearity calculated by
Penmount’s application program as the result of user’s execution of
Advanced Calibration.
Turn off EEPROM storage This function disables the write-in of calibration data in the controller.
This function is enabled by default.
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
