GreenWorks Pro SN60L611 Bedienungsanleitung

SN60L611

EN OPERATOR MANUALSNOW THROWER

ES MANUAL DEL OPERADOREQUIPO QUITANIEVE

1 Description.................................... 4

1.1 Purpose...................................................... 4

1.2 Overview.................................................... 4

2 General power tool safety

warnings........................................ 4

2.1 Training...................................................... 4

2.2 Preparation.................................................5

2.3 Operation....................................................6

2.4 Maintenance...............................................8

3 Proposition 65............................... 9

4 Symbols on the product.................9

5 Risk levels................................... 10

6 Installation................................... 10

6.1 Unpack the machine.................................10

6.2 Install the battery pack............................. 10

6.3 Remove the battery pack......................... 10

6.4 Install the upper handle............................ 11

6.5 Install the middle handle...........................11

6.6 Install the chute deflector......................... 11

6.7 Install the chute control rod...................... 11

7 Operation.....................................12

7.1 Cold weather operation............................ 12

7.2 Start the machine..................................... 12

7.3 Stop the machine..................................... 12

7.4 Adjust the discharge chute....................... 12

7.5 Adjust the chute deflector.........................13

7.6 LED headlights......................................... 13

7.7 Operation tips........................................... 13

8 Maintenance................................13

8.1 General maintenance............................... 13

8.2 Replace the scraper................................. 14

8.3 Replace the impeller.................................14

8.4 Store the machine.................................... 14

9 Troubleshooting...........................14

10 Technical data............................. 15

11 Limited warranty.......................... 15

12 Exploded view............................. 16

English EN

1 DESCRIPTION

1.1 PURPOSE

This machine is used to remove and clear away snow

from pavements, gardens, driveways and other ground-

level surfaces.

1.2 OVERVIEW

1Handle bar

2Bail Lever

3Safety switch button

4Upper handle

5Carrying or lifting handle

6Battery compartment

7Chute deflector

8Discharge chute

9Impeller

10 Scraper

11 Wheel

12 Lower handle

13 Chute control rod

14 Middle handle

15 LED lights

2 GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool.

2.1 TRAINING

• This power tool can be used

by children aged from 8

years and above and

persons with reduced

physical, sensory or mental

capabilities or lack of

experience and knowledge

if they have been given

supervision or instructions

concerning use of the

power tool in a safe way

and understand the hazards

involved. Children shall not

play with the power tool.

Cleaning and user

maintenance shall not be

made by children without

supervision.

• Read the operating and

service instruction manual

carefully. Be thoroughly

familiar with the controls

and the proper use of the

power tool. Know how to

stop the unit and disengage

the controls quickly.

• Never allow children to

operate the power tool.

Never allow adults to

operate the power tool

without proper instruction.

English

• Keep the area of operation

clear of all persons,

particularly small children,

and pets.

• Exercise caution to avoid

slipping of falling, especially

when operating in reverse.

• Do not use on graveled

surface unless the snow

mover is adjusted for such a

surface in accordance with

the operator’s manual.

• Dress Properly – Do not

wear loose clothing or

jewelry. They can be caught

in moving parts.

• Wear rubber boots when

operating the snow thrower.

• Operation of the snow

thrower in the hand-held

position is unsafe, except in

accordance with the special

instructions for such use

provided in the operator’s

manual.

• Avoid Accidental Starting–

Don’t carry battery pack in

snow thrower with finger on

switch. Be sure switch is off

when insert battery pack.

2.2 PREPARATION

• Thoroughly inspect the area

where the power tool is to

be used and remove all

doormats, sleds, boards,

wires, and other foreign

objects.

• Do not operate the power

tool without wearing

adequate winter garments.

Wear footwear, which will

improve footing on slippery

surfaces.

• Adjust the collector housing

height to clear gravel or

crushed rock surface.

• Never attempt to make any

adjustments while the

machine is running (except

where specifically

recommended by

manufacturer).

• Always wear safety glasses

or eye shields during

operation or while

performing an adjustment or

repair to protect eyes from

foreign objects that may be

thrown from the machine.

• Prevent unintentional

starting. Ensure the switch

English EN

is in the off-position before

connecting to battery pack,

picking up or carrying the

appliance. Carrying the

appliance with your finge on

the switch or energizing

appliance that have the

switch on invites accidents.

• Disconnect the battery pack

from the appliance before

making any adjustments,

changing accessories, or

storing appliance. Such

preventive safety measures

reduce the risk of starting

the appliance accidentally.

• When battery pack is not in

use,keep it away from other

metal objects,like paper

clips,coins,keys,nails,screw

s or other small metal

objects,that can make a

connection from one

terminal to another.Shorting

the battery terminal

stogether may cause burns

or a fire

2.3 OPERATION

• Do not put hands or feet

near or under rotating parts.

Keep clear of the discharge

opening at all times.

• Exercise extreme caution

when operating on or

crossing gravel drives,

walks, or roads. Stay alert

for hidden hazards or traffic.

• After striking a foreign

object, turn the machine off

and remove the battery

pack, and then inspect it for

damage. Repair any

damage before restarting

and using the machine.

• If the power tool should

start to vibrate abnormally,

stop the machine and check

immediately for the cause.

Vibration is generally a

warning of trouble.

• Stop the machine whenever

you leave the operating

position, before unclogging

the collector/impeller

housing or discharge guide,

and when making any

repairs, adjustments, or

inspections.

• When cleaning, repairing, or

inspecting, make certain the

collector/impeller and all

moving parts have stopped.

English

• Exercise extreme caution

when operating on slopes.

• Never operate the snow

thrower without proper

guards, keep other safety

protective devices in place

and working.

• Never direct the discharge

toward people or areas

where property damage can

occur. Keep children and

others away.

• Don’t Overreach – Keep

proper footing and balance

at all times.

• Do not overload the

machine capacity by

attempting to clear snow at

too fast a rate.

• Don’t Force Snow Mover –

It will perform better and

safer at the rate for which it

was designed.

• Never operate the power

tool at high transport

speeds on slippery

surfaces. Use care when

reversing.

• Never direct discharge at

bystanders or allow anyone

in front of the power tool.

• Disengage power to the

collector/impeller when the

power tool is transported or

not in use.

• Use only attachments and

accessories approved by

the manufacturer of the

snow thrower (such as

wheel weights,

counterweights, or cabs).

• Never operate the power

tool without good visibility or

light. Always be sure of your

footing, and keep a firm

hold on the handles.

• Walk, never run.

• Never touch a hot engine or

muffler.

• Clearing a Clogged

Discharge Chute.

• Hand contact with the

rotating impeller inside the

discharge chute is the most

common cause of injury

associated with snow

throwers. Never use your

hand to clean out the

discharge chute. To clear

the chute:

1.SHUT THE ENGINE

（Motor） OFF!

English EN

2.Wait 10 seconds to be

sure the impeller blades

have stopped rotating.

3.Always use a clean-out

tool, not your hands.

• If the snow thrower strikes a

foreign object follow these

steps:

1.Stop snow thrower.

Release the switch.

2.Remove the battery pack.

3.Inspect for damage.

4.Repair any damage

before restarting and

operating the snow

thrower.

2.4 MAINTENANCE

• Check shear bolts; engine-

mounted bolt, etc., at

frequent intervals for proper

tightness to be sure the

power tool is in safe

working condition.

• Always refer to owner’s

guide instructions for

important details if the

power tool is to be stored

for an extended period.

• Store Idle Snow Movers

Indoors – When not in use,

snow movers should be

stored indoors in dry,

locked-up place – out of

reach of children.

• Store Idle Snow Movers

Indoors – When not in use,

snow movers should be

stored indoors in dry,

locked-up place – out of

reach of children.

• Run the power tool a few

minutes after throwing snow

to prevent freeze-up of the

collector/impeller.

• Do not use a battery pack

or appliance that is

damaged or

modified.Damaged or

modified batteries may

exhibit unpredictable

behavior resulting in fire，

explosion or risk of injury.

• Do not expose a battery

pack or appliance to fire or

excessive

emperature.Exposure to fire

or temperature

above130°Cmay cause

explosion.The temperature

of 130°C can be replaced

by the temperature of

265°F.

English

• Follow all charging

instructions and do not

charge the battery pack or

appliance outside of the

temperature range specifie

in the instructions. Charging

improperly or at

temperatures outside of the

specifie range may damage

the battery and increase the

risk of fire.

• Have servicing performed

by a qualifie repair person

using only identical

replacement parts. This will

ensure that the safety of the

product is maintained.

• Do not modify or attempt to

repair the appliance or the

battery pack (as applicable)

except as indicated in the

instructions for use and

care.

• Maintain Snow Thrower

With Care – Follow

instructions for lubricating

and changing accessories.

3 PROPOSITION 65

WARNING

This product contains a chemical known to the state of

California to cause cancer, birth defects or other

reproductive harm. Some dust created by power

sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and other

masonry products;

• Arsenic and chromium from chemically treated

lumber.

Your risk of exposure to these chemicals varies

depending on how often you do this type of work. To

reduce your exposure to these chemicals, work in a

well-ventilated area, and work with approved safety

equipment, such as dust masks that are specially

designed to filter out microscopic particles.

Save these instructions.

4 SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.

Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate

the tool better and safer.

Symbol Explanation

Direct current

Precautions that involve your

safety.

Read and understand all instruc-

tions before operating the prod-

uct, and follow all warnings and

safety instructions.

Wear eye and ear protection.

Thrown objects can ricochet and

result in personal injury or proper-

ty damage. Wear protective cloth-

ing and boots.

Keep bystanders a safe distance

from the machine.

Keep hands away from the dis-

charge area.

English EN

Symbol Explanation

Stay away from moving parts.

Keep all guards and shields in

place.

Keep feet out of impeller. Keep

feet away from rotating impeller.

Stop the motor and remove the

battery before leaving the product.

5 RISK LEVELS

The following signal words and meanings are intended

to explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL MEANING

DANGER Indicates an imminently

hazardous situation,which,

if not avoided, will result in

death or serious injury.

WARNING Indicates a potentially haz-

ardous situation,which, if

not avoided, could result in

death or serious injury.

CAUTION Indicates a potentially haz-

ardous situation, which, if

not avoided, may result in

minor or moderate injury.

CAUTION (Without Safety Alert Sym-

bol) Indicates a situation

that may result in property

damage.

6 INSTALLATION

WARNING

Do not change or make accessories that are not

recommended by the manufacturer.

WARNING

Do not connect to power supply until you assemble all

the parts.

6.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine

before use.

WARNING

• If the parts have damage, do not use the machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, speak to the

service center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with

local regulations.

6.2 INSTALL THE BATTERY PACK

WARNING

• If the battery pack or charger is damaged, replace

the battery pack or the charger.

• Stop the machine and wait until the engine stops

before you install or remove the battery pack.

• Read, know, and do the instructions in the battery

and charger manual.

1. Open the battery door(1).

2. Align the ribs on the battery pack(2) with the

grooves in the battery compartment.

3. Push the battery pack(2) into the battery

compartment until the battery pack(2) locks into

place.

4. When you hear a click, the battery pack(2) is

installed.

5. Close the battery door(1).

6.3 REMOVE THE BATTERY PACK

1. Open the battery door(1).

English

Inhaltsverzeichnis

Sprachen:

Andere GreenWorks Pro Schneefräse Handbücher

GreenWorks Pro

GreenWorks Pro GLSS80000 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNC406 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SN60L02 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SN60L02 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SS60L00 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro 2608402CO Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNB403 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNB403 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SSB403 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro 060-0799-6 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNC407 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNC405 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro 2600402 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SN80L620 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SN60L522 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro 2601302 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SNC403 Bedienungsanleitung

GreenWorks Pro

GreenWorks Pro SN60L00 Bedienungsanleitung

Beliebte Schneefräse Handbücher anderer Marken

Murray

Murray 624504X4A Bedienungsanleitung

Blizzard

Blizzard POWER PLOW 8100PP Bedienungsanleitung

Craftsman

Craftsman 486.24837 Bedienungsanleitung

Yard-Man

Yard-Man E2B5 Bedienungsanleitung

ST ST 526 A Bedienungsanleitung

MTD

MTD 3AA Bedienungsanleitung

Toro

Toro Power TRX 1428 OHXE Bedienungsanleitung

Ryobi

Ryobi RYAC800 Bedienungsanleitung

Poulan Pro

Poulan Pro 416829 Bedienungsanleitung

MTD

MTD 319-180-00 Bedienungsanleitung

Poulan Pro

Poulan Pro 437986 Bedienungsanleitung

Brute

Brute 1695565 Bedienungsanleitung

Egholm

Egholm City Ranger 2250 Bedienungsanleitung

Poulan Pro

Poulan Pro 420915 Bedienungsanleitung

GreenWorks

GreenWorks SNF402 Bedienungsanleitung

LOFTNESS

LOFTNESS 601D1 Bedienungsanleitung

LOFTNESS

LOFTNESS 1082I Bedienungsanleitung

LOFTNESS

LOFTNESS 481EL Bedienungsanleitung