GreenWorks Pro WL60A00 Bedienungsanleitung

WL60A00

EN OPERATOR MANUAL

FR MANUEL D’OPÉRATEUR

WORK LIGHT

LAMPE DE TRAVAIL

ES MANUAL DEL OPERADORLUZ DE TRABAJO

www.greenworkstools.com

1 Description.........................................4

1.1 Purpose.............................................................. 4

1.2 Overview........................................................... 4

1.3 Packing list........................................................ 4

2 General power tool safety

warnings.............................................4

2.1 General work light safety warnings...................4

2.2 Electrical safety................................................. 4

2.3 Extension cords..................................................4

2.4 Power tool use and care.....................................5

2.5 Battery tool use and care................................... 5

2.6 Service............................................................... 5

3 Symbols on the product.................... 5

4 Risk levels...........................................6

5 Child safety........................................ 6

6 Proposition 65....................................6

7 Environmentally safe battery

disposal...............................................6

8 Installation......................................... 7

8.1 Unpack the work light....................................... 7

8.2 Install the battery pack.......................................7

8.3 Remove the battery pack................................... 7

8.4 Install the light head.......................................... 8

8.5 Remove the light head....................................... 8

9 Operation........................................... 8

9.1 Start the work light............................................ 8

9.2 Stop the work light............................................ 8

9.3 Swivel the light head......................................... 9

10 Maintenance.......................................9

10.1 Clean the work light.......................................... 9

11 Technical data....................................9

12 Limited warranty.............................. 9

13 Exploded view..................................10

English EN

1 DESCRIPTION

1.1 PURPOSE

The work light is used to illuminate the work area.

1.2 OVERVIEW

3412756

1Auxiliary handle

2Lens

3Knob

4Hook

5Plug

6ON/OFF switch

7S Hook

1.3 PACKING LIST

1. Work light

2. Hook

3. S Hook

4. Manual

2 GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

2.1 GENERAL WORK LIGHT SAFETY

WARNINGS

• Verify that the work light is secure while transporting.

• Store the work light in a dry area that will prevent

unauthorized use or damage. Keep out of the reach of

children.

• Keep handles dry, clean, and free of debris. Clean the

work light after each use. Refer to the Maintenance

Section in this manual for more information.

• Keep these instructions in a safe place for future

reference. Refer to them often and use them to instruct

other users. Anyone who uses this work light must read

these instructions carefully.

• Maintain the work light with care. Follow the instructions

for lubricating and changing accessories.

2.2 ELECTRICAL SAFETY

• To disconnect, turn all controls to the off (″O″) position,

then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Unplug from outlet when not in use and before servicing

or cleaning.

• Do not operate any work light with a damaged cord or

plug, or after the work light malfunctions or is dropped or

damaged in any manner. Return work light to the nearest

authorized service facility for examination, repair, or

electrical or mechanical adjustment.

• Don’t Abuse Cord – Never carry work light by cord or

yank it to disconnect from receptacle. Keep cord away

from heat, oil, and sharp edges.

• Disconnect the work light from the power supply when

not in use, before servicing, when changing bulbs (lamp),

cleaning, and similar actions.

• When using a power tool at a considerable distance from

a power source, be sure to use an extension cord that has

the capacity to handle the current the work light will

draw. An undersized cord will cause a drop in line

voltage, resulting in overheating and loss of power. Use

the chart to determine the minimum wire size required in

an extension cord. Only round jacketed cords listed by

Underwriter’s Laboratories (UL) should be used.

• Do not insert foreign objects into this work light.

2.3 EXTENSION CORDS

• Use only extension cords which have plugs and

receptacles which accept the work light ’s plug. Replace

damaged extension cords.

• When working outdoors with a work light , use an

extension cord that is designed for outside use. This type

of cord is designated with “W-A” or “W” on the cord’s

jacket. Before using any extension cord, inspect it for

loose or exposed wires and cut or worn insulation.

• Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy

enough to carry the current your work light will draw. An

undersized extension cord will cause a drop in line

voltage resulting in loss of power and overheating. The

table on the next page shows the correct size to use

depending on cord length and nameplate ampere rating. If

in doubt, use the next heavier gauge. The smaller the

gauge number, the heavier the cord.

English

Minimum Gauge for Extension Cords (AWG)

(when using 120 V only)

Amp Rating Total Length of Cord in Feet (meters)

Than

Not

Than

25' (7.6

50' (15

100' (30

150'

(45m)

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommen-

ded

Keep the extension cord clear of the working area. Position

the cord so that it will not get caught on lumber, tools, or

other obstructions while you are working with a work light .

Failure to do so can result in serious personal injury.

Check extension cords before each use. If damaged replace

immediately. Never use the work light with a damaged cord

since touching the damaged area could cause electrical shock

resulting in serious injury.

2.4 POWER TOOL USE AND CARE

• If operating a work light in a damp location is

unavoidable, then the work light should only be

connected to a circuit that is protected by a ground-fault

circuit-interrupter (GFCI). Use of a GFCI reduces the risk

of electric shock.

• Store work light indoors when not in use.

• Keep out of reach of children.

• Do not clean this work light with a water spray or the

like. Follow manufacturers cleaning instructions.

• Avoid direct eye exposure. Do not direct the light beam at

persons or animals and do not stare into the light beam

yourself (not even from a distance). The work light can

cause flash blindness.

• Do not use the work light in road traffic. The cordless

work light is not approved for illumination in road traffic.

• The lens gets very hot during use. To reduce the risk of

burns, do not touch hot lens. Only use power extension

cord set with NEMA 5-15R receptacle and NEMA 5-15P

plug.

2.5 BATTERY TOOL USE AND CARE

• Disconnect the battery pack from the work light before

making any adjustments, changing accessories, or storing

power tools, etc.

• Do not permit children to use the work light; it is not a

toy. Children can unintentionally blind themselves or

other persons.

• Recharge only with the battery charger specified by the

manufacturer. A battery charger that is suitable for one

type of battery pack may create a risk of fire when used

with another battery pack.

• Use only with specifically designated battery packs. Use

of any other battery packs may create a risk of injury and

fire.

• When battery pack is not in use, keep it away from other

metal objects like paper clips, coins, keys, nails, screws,

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery

terminals together may cause burns or a fire.

• The battery can be damaged by pointed objects such as

nails or screwdrivers or by force applied externally. An

internal short circuit can occur and the battery can burn,

smoke, explode or overheat.

• Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

• Battery disposal should be in compliance with the local

regulations that address the disposal of hazardous

materials. Do not incinerate battery pack.

2.6 SERVICE

•Have your work light serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the work light is maintained.

•Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers.

3 SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this work

light. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the

tool better and safer.

Symbol Explanation

V Voltage

A Current

Hz Frequency (cycles per second)

Wh Energy Storage Capacity

Ah Current Capacity

Lm Lumen

Alternating Current

Direct current

English EN

Symbol Explanation

Safety alert

Read and understand all instructions be-

fore operating the product, and follow all

warnings and safety instructions.

Do not expose the product to rain or

moist conditions.

4 RISK LEVELS

The following signal words and meanings are intended to

explain the levels of risk associated with this work light

SYM-

BOL

SIGNAL MEANING

DANGER Indicates an imminently haz-

ardous situation, which, if not

avoided, will result in death

or serious injury.

WARNING Indicates a potentially hazard-

ous situation, which, if not

avoided, could result in death

or serious injury.

CAUTION Indicates a potentially hazard-

ous situation, which, if not

avoided, may result in minor

or moderate injury.

CAUTION (Without Safety Alert Sym-

bol) Indicates a situation that

may result in property dam-

age.

5 CHILD SAFETY

Tragic accidents can occur if the operator is not aware of the

presence of children.

• Keep children out of the working area and under the

watchful care of a responsible adult.

• Do not allow children under the age of 14 to operate this

work light. Children who are 14 years of age and older

must read and understand the operating instructions and

safety rules in this manual and must be trained and

supervised by a parent.

• Stay alert, and turn the work light off if a child or any

other person enters the working area.

• Use extreme care when approaching blind corners,

doorways, shrubs, trees, or other objects that may obscure

your view of a child who may run into the path of the

work light.

6 PROPOSITION 65

WARNING

This product contains a chemical known to the state of

California to cause cancer, birth defects or other

reproductive harm. Some dust created by power sanding,

sawing, grinding, drilling, and other construction activities

contains chemicals known to cause cancer, birth defects or

other reproductive harm. Some examples of these chemicals

are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and other

masonry products;

• Arsenic and chromium from chemically treated lumber.

Your risk of exposure to these chemicals varies depending

on how often you do this type of work. To reduce your

exposure to these chemicals, work in a well-ventilated area,

and work with approved safety equipment, such as dust

masks that are specially designed to filter out microscopic

particles.

Save these instructions.

7 ENVIRONMENTALLY SAFE

BATTERY DISPOSAL

The toxic and corrosive materials below are in the batteries

used in this machine: Lithium-Ion, a toxic material.

WARNING

Discard all toxic materials in a specified manner to prevent

contamination of the environment. Before discarding

damaged or worn out Li-ion battery, contact your local

waste disposal agency, or the local Environmental

Protection Agency for information and specific instructions.

Take the batteries to a local recycling and/or disposal center,

certified for lithium-ion disposal.

English

WARNING

If the battery pack cracks or breaks, with or without leaks,

do not recharge it and do not use. Discard it and replace

with a new battery pack. DO NOT TRY TO REPAIR IT! To

prevent injury and risk of fire, explosion, or electric shock,

and to avoid damage to the environment:

• Cover the terminals of the battery with heavy-duty

adhesive tape.

• DO NOT try to remove or destroy any of the battery

pack components.

• DO NOT try to open the battery pack.

• If a leak develops, the released electrolytes are

corrosive and toxic. DO NOT get the solution in the

eyes or on skin, and do not swallow it.

• DO NOT put these batteries in your regular household

trash.

• DO NOT incinerate.

• DO NOT put them where they will become part of any

waste landfill or municipal solid waste stream.

• Take them to a certified recycling or disposal center.

8 INSTALLATION

8.1 UNPACK THE WORK LIGHT

WARNING

It is not necessary to assemble the work light.

• If parts are damaged, do not use the work light.

• If you do not have all the parts, do not operate the work

light.

• If the parts are damaged or missing, contact the service

center.

1. Open the package.

2. Read the documentation in the box.

3. Remove the work light from the box.

4. Discard the box and packaging material in compliance

with local regulations.

8.2 INSTALL THE BATTERY PACK

WARNING

• If the battery pack or charger is damaged, replace the

battery pack or the charger.

• Stop the work light and wait until the motor stops

before you install or remove the battery pack.

• Read, know, and follow the instructions in the battery

and charger manual.

1. Align the lift ribs on the battery pack with the grooves in

the battery compartment.

2. Push the battery pack into the battery compartment until

the battery pack locks into place.

3. When you hear a click, the battery pack is installed.

8.3 REMOVE THE BATTERY PACK

1. Push and hold the battery release button.

2. Remove the battery pack from the work light

English EN

8.4 INSTALL THE LIGHT HEAD

WARNING

• Battery tools are always in operating condition.

Therefore, always turn off the light when the light is not

in use or when carrying the work light at your side.

1. Align the bolt the the hole (on the bracket).

2. Insert the bolt into the hole until it kocks into place and

then tighten them with knobs.

3. Do the same operation on the other side.

8.5 REMOVE THE LIGHT HEAD

1. Unlock the right and left knobs.

2. Remove the bolts.

9 OPERATION

WARNING

Do not use any attachments or accessories not

recommended by the manufacturer of this work light.

9.1 START THE WORK LIGHT

1. Install the battery pack or connect the power source.

2. Press the ON/OFF switch to turn the work light on. The

work light will be turned on at maximum brightness.

3. To reduce the brightness, press the ON/OFF switch again.

Low voltage operation

When the battery pack is less than 5%, the work light will

flash three times with a brightness of 500 lumens.

WARNING

• Do not continue to press the ON/OFF switch after the

work light has automatically switched off. The battery

can be damaged.

9.2 STOP THE WORK LIGHT

1. Press the ON/OFF switch to turn the work light off.

English

9.3 SWIVEL THE LIGHT HEAD

1. Hold the auxiliary handle and unlock the right and left

knobs.

2. Turn the light head to the necessary position.

3. Tighten the knobs.

10 MAINTENANCE

WARNING

Remove the battery pack from the work light before

maintenance.

WARNING

Do not use strong solvents or detergents on the plastic

housing or components.

10.1 CLEAN THE WORK LIGHT

CAUTION

The work light must be dry. Humidity can cause risks of

electrical shocks.

• Clear the unwanted material out of the air vent with a

vacuum cleaner.

• Do not spray the air vent or put the air vent in solvents.

• Clean the housing and the plastic components with a

moist and soft cloth.

11 TECHNICAL DATA

Voltage 60 V

Lumens 2500 lm

Run time (when used with

60V 2ah battery)

Up to 4 hours ( high ) Up to

7.9 hours ( low )

Rotation angle 360°

Weight without battery 4.4 lbs (2 kg)

Weight with 60V 2ah battery 7.27 lbs (3.3 kg)

Battery model LB602 and other BAC series

Charger model CAC801 and other CAC ser-

ies

The recommended ambient temperature range:

Item Temperature

Appliance storage tempera-

ture range

32°F (0°C) - 158°F (70°C)

Appliance operation temper-

ature range

32°F (0°C) - 104°F (40°C)

Battery charging temperature

range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-

ture range

39°F (4°C) - 104°F (40°C)

Battery storage temperature

range

32°F (0°C) - 73°F (23°C)

Battery discharging tempera-

ture range

32°F (0°C) - 113°F (45°C)

12 LIMITED WARRANTY

•

GARANTIE OUTIL &

BATTERIE • GARANTÍA PARA

HERRAMIENTAS Y BATERÍAS

Greenworks hereby warranties this product, to the original

purchaser with proof of purchase, for a period of four (4)

years against defects in materials, parts or workmanship.

Greenworks, at its own discretion will repair or replace any

and all parts found to be defective, through normal use, free

of charge to the customer. This warranty is valid only for

units which have been used for personal use that have not

been hired or rented for industrial/commercial use, and that

have been maintained in accordance with the instructions in

the owners’ manual supplied with the product from new.

English EN

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper

maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear, except as noted below;

4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline,

at 1-855-345-3934.

TRANSPORTATION CHARGES:

Transportation charges for the movement of any power

equipment unit or attachment are the responsibility of the

purchaser. It is the purchaser’s responsibility to pay

transportation charges for any part submitted for replacement

under this warranty unless such return is requested in writing

by Greenworks.

USA address: Canadian address:

Greenworks Tools Greenworks Tools Canada Inc.

P.O. Box 1238 P.O. Box 93095, Newmarket,

Ontario

Mooresville, NC 28115 L3Y 8K3

13 EXPLODED VIEW

1 2

No. Item No. QTY Description

1. R0201158-00 2 Knob

2. R0201156-00 1 S Hook

3. R0201157-00 1 Hook

4. R0201155-00 1 Bracket

English

1 Description.......................................12

1.1 But................................................................... 12

1.2 APERÇU......................................................... 12

1.3 Liste du contenu de l’emballage......................12

2 Avertissements généraux de

sécurité des outils électriques......... 12

2.1 Avertissements généraux de sécurité des

outils électriques..............................................12

2.2 Sécurité électrique........................................... 12

2.3 Rallonges électriques.......................................12

2.4 Utilisation et entretien des outils électriques...13

2.5 Utilisation et entretien de l’outil sur batterie...13

2.6 Service............................................................. 14

3 Symboles figurant sur la machine. 14

4 Niveaux de risques...........................14

5 Sécurité des enfants.........................14

6 Proposition 65..................................14

7 Élimination des batteries sans

danger pour l'environnement.........15

8 Installation....................................... 15

8.1 Déballez la machine.........................................15

8.2 Installez le bloc-batterie...................................15

8.3 Retirez la batterie.............................................16

8.4 Installez la tête d'éclairage...............................16

8.5 Retirez la tête d'éclairage.................................16

9 Utilisation.........................................16

9.1 Démarrez la machine.......................................16

9.2 Arrêtez la machine...........................................16

9.3 Faites pivoter la tête d'éclairage.......................17

10 Entretien...........................................17

10.1 Nettoyez la machine........................................ 17

11 Données techniques......................... 17

12 Garantie limitée...............................17

13 Vue éclatées...................................... 18

Français

Inhaltsverzeichnis

Sprachen:

Andere GreenWorks Pro Arbeitsleuchte Handbücher

GreenWorks Pro

GreenWorks Pro WL80B00 Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

IKEA

IKEA STRÖMLINJE Bedienungsanleitung

Regent

Regent CHSL300 Bedienungsanleitung

Monzana

Monzana Spodaj MZUL277 Bedienungsanleitung