GreenWorks STG307 Bedienungsanleitung

24V 12" String Trimmer

EN

FR

OPERATOR MANUAL

MANUEL DE L’UTILISATEUR

STRING TRIMMER

COUPE-HERBE

9.7 ADJUST THE LENGTH OF THE

CUTTING LINE

While you operate the machine, the cutting line gets worn and

shorter. You can adjust the length of the cutting line.

1. Hit the trimmer head against the ground while you

operate the machine.

2. Line is automatically released and the cut-off blade cuts

the excess length.

9.8 ADJUST THE CUTTING

DIAMETER

NOTE

The machine is set at a 12 in. (305 mm) cutting diameter.

You can adjust to a 10 in. (254 mm) cutting diameter.

Set the cutting diameter to 10 in. (254 mm) for greater

runtime and 12 in. (305 mm)for a larger cutting area.

1. Remove the battery pack.

2. Remove the blade screws from the cut-off blade (16).

3. Turn the cut-off blade 180°.

4. Tighten the blade screws.

9.9 LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade on the

guard. The line cut off blade continuously trims the line to

ensure a consistent and efficient cut diameter. Advance line

whenever you hear the engine running faster than normal, or

when trimming efficiency diminishes. This will maintain best

performance and keep line long enough to advance properly.

10 MAINTENANCE

IMPORTANT

Read and understand the safety regulations and the

maintenance instructions before you clean, repair or do the

maintenance work on the machine.

IMPORTANT

Make sure that all nuts, bolts and screws are tight. Examine

regularly that you install the handles tightly.

IMPORTANT

Use only the replacement parts and accessories of the initial

manufacturer.

10.1 GENERAL INFORMATION

IMPORTANT

Only your dealer or approved service center can do the

maintenance that is not given in this manual.

Before the maintenance operations:

• Stop the machine.

• Remove the battery pack.

• Cool the motor.

• Store the machine in cool and dry place.

• Use correct clothing, protective gloves and safety glasses.

10

English

EN

Andere Handbücher für STG307

3

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere GreenWorks Trimmer Handbücher

GreenWorks

GreenWorks PSG301 Bedienungsanleitung

GreenWorks

GreenWorks STE404 Bedienungsanleitung

GreenWorks

GreenWorks Elite ST-140-T Bedienungsanleitung

GreenWorks

GreenWorks G40HT61K2 Bedienungsanleitung

GreenWorks

GreenWorks 2101602 Bedienungsanleitung

GreenWorks

GreenWorks STF456 Bedienungsanleitung

GreenWorks

GreenWorks GH 260 Bedienungsanleitung

GreenWorks

GreenWorks G48HT Bedienungsanleitung

GreenWorks

GreenWorks ELITE ST-140-AT Bedienungsanleitung

GreenWorks

GreenWorks 2101602CT Bedienungsanleitung

GreenWorks

GreenWorks HTF301 Bedienungsanleitung

GreenWorks

GreenWorks G48ST8 Bedienungsanleitung

GreenWorks

GreenWorks HTG329 Bedienungsanleitung

GreenWorks

GreenWorks PH40B210 Bedienungsanleitung

GreenWorks

GreenWorks G24LT25 Bedienungsanleitung

GreenWorks

GreenWorks STE456 Bedienungsanleitung

GreenWorks

GreenWorks 22147T Bedienungsanleitung

GreenWorks

GreenWorks G24PSHK2 Bedienungsanleitung

GreenWorks

GreenWorks PH40B210 Bedienungsanleitung

GreenWorks

GreenWorks 2101202 Bedienungsanleitung

GreenWorks

GreenWorks 21342 Bedienungsanleitung

GreenWorks

GreenWorks G24ST Bedienungsanleitung

GreenWorks

GreenWorks HT24B05 Bedienungsanleitung

GreenWorks

GreenWorks STF310 Bedienungsanleitung

Beliebte Trimmer Handbücher anderer Marken

MTD

MTD HT 51 E Bedienungsanleitung

McCulloch

McCulloch T22 LS Bedienungsanleitung

COCKRAFT

COCKRAFT PRO HL36-S Bedienungsanleitung

Grizzly

Grizzly CT 1800 Li Bedienungsanleitung

Peco

Peco Z Trimmer ZT-3000 Bedienungsanleitung

Solo

Solo 116 Bedienungsanleitung

Stiga

Stiga ST 1200 Bedienungsanleitung

Echo

Echo GT-225 - 10-09 Bedienungsanleitung

RedMax

RedMax BT17 Bedienungsanleitung

Parkside

Parkside PHSL 900 A3 Bedienungsanleitung

Gardeo

Gardeo PRO GPTHT2560 Bedienungsanleitung

Park

Park DT-810870 Bedienungsanleitung

Worx

Worx WG209 Bedienungsanleitung

Gardenline

Gardenline 43671/HTKS26 Bedienungsanleitung

Makita

Makita 3710 Bedienungsanleitung

Champion

Champion 100683 Bedienungsanleitung

Stihl

Stihl FS 311 Bedienungsanleitung

Efco

Efco STARK 38 Handbuch