Grizzly T33682 Bedienungsanleitung

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T33682

DRILL PRESS TRAY

INSTRUCTIONS

Introduction

***Keep for Future Reference***

The Model T33682 holds bits, chucks and other

equipment for your drill press. It easily mounts to a

drill press column up to 43⁄4" in diameter, and can

be conveniently rotated 360° during operations for

closer access.

The tray size is 113⁄8" across and has pre-drilled

mounting holes for bit sizes 1⁄16" to 1⁄2" in 32nd and

64th increments.

To reduce risk of serious

injury, read this entire

manual BEFORE using

drill press tray. Read and

understand instructions/

safety warnings provided

by manufacturer for any

machine or tool you plan to

use with this tray.

Figure 1. Model T33682.

Inventory

Contents (Figure 2) Qty

A. Tool Tray ..................................................... 1

B. Z-Bar 1⁄2" ..................................................... 1

C. Z-Bar 3⁄8" ..................................................... 1

D. Key Hose Clamps 5" .................................. 2

E. Z-Bar Adapter ............................................. 1

F. Mounting Block ........................................... 1

Figure 2. Inventory.

A B

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 07/23) #JM22675 PRINTED IN CHINA V1.07.23

-2- Model T33682 (Mfd. Since 07/23)

Installation

Installing the Model T33682 consists of clamping

the mounting block to the drill press column, and

installing the Z-bars, adapter, and tool tray.

Figure 4. 1⁄2" Z-bar installed.

Mounting

Block

1⁄2" Z-Bar

6. Mount Z-bar adapter on 1⁄2" Z-bar

(see Figure 5).

Note: Z-bar adapter has one end drilled at 3⁄8"

and one end drilled at 1⁄2".

7. Mount 3⁄8" Z - b a r i n t o Z - b a r a d a p t e r

(see Figure 5).

8. Insert tool tray on top of 3⁄8" Z - b a r

(see Figure 5).

5. Mount 1⁄2" Z-bar into mounting block

(see Figure 4).

Figure 5. Drill press tray installed.

Tool Tray

3⁄8" Z-Bar

Z-Bar

Adapter

To install drill press tray:

1. Unscrew hose clamp key until band is free of

shroud, then repeat with second hose clamp.

2. Feed clamp bands through slots in mounting

block, then slide clamp bands underneath

drill press rack (see Figure 3).

Note: Do not position clamps over rack. They

will interfere with movement of drill press

column.

3. Position mounting block on drill press column

(see Figure 3).

Note: Position mounting block high enough

on column so it does not interfere with table

movement.

4. Insert clamp bands in shrouds and tighten

until snug (see Figure 3).

Figure 3. Mounting block attached on drill press

column.

Column

Rack

Key Hose

Clamps

(1 of 2)

Mounting

Block

Mounting

Block

Slot

(1 of 2)

Clamp

(1 of 2)

Andere Grizzly Bohren Handbücher

Grizzly

Grizzly G1131 Bedienungsanleitung

Grizzly

Grizzly H6364 Bedienungsanleitung

Grizzly

Grizzly G0517g Bedienungsanleitung

Grizzly

Grizzly G0484 Bedienungsanleitung

Grizzly

Grizzly G8600 Bedienungsanleitung

Grizzly

Grizzly T33127 Bedienungsanleitung

Grizzly

Grizzly G0761 Bedienungsanleitung

Grizzly

Grizzly G0463 Bedienungsanleitung

Grizzly

Grizzly G0643 Bedienungsanleitung

Grizzly

Grizzly G7943 Bedienungsanleitung

Grizzly

Grizzly G9908 Bedienungsanleitung

Grizzly

Grizzly G8597 Kurzanleitung

Grizzly

Grizzly G0669X Bedienungsanleitung

Grizzly

Grizzly G0705 Bedienungsanleitung

Grizzly

Grizzly G9909 Bedienungsanleitung

Grizzly

Grizzly G8597 1 /2-inch Bedienungsanleitung

Grizzly

Grizzly G5351 Bedienungsanleitung

Grizzly

Grizzly G0669X Bedienungsanleitung

Grizzly

Grizzly G8594 Bedienungsanleitung

Grizzly

Grizzly G0720R Bedienungsanleitung

Grizzly

Grizzly G0463 Bedienungsanleitung

Grizzly

Grizzly G7945 Bedienungsanleitung

Grizzly

Grizzly T23093 Bedienungsanleitung

Grizzly

Grizzly G4008 Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung