Grizzly T10043 Bedienungsanleitung

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#JB10063 PRINTED IN CHINA

MODEL T10043

38" LAWN SWEEPER

INSTRUCTION SHEET

• Read the vehicle and sweeper owner's

manuals and know how to operate your

vehicle and sweeper before using this

sweeper attachment.

• Maximum speed limit while towing this

sweeper is 6mph.

• Do not allow children or anyone without

proper training to operate the sweeper.

• Do not use sweeper as a trailer for

carrying people or animals.

• Keep all hardware tightened to be sure

the sweeper is in safe working order.

Figure 1. Model T10043 38" Lawn Sweeper.

Introduction

The Model T10043 38" Lawn Sweeper features

four rows of bristle brushes, a large capacity leaf

bag that swings up for dumping, adjustable height

settings, and a universal hitch for towing behind

any riding lawn mower.

Tools Needed for Assembly

• 10, 13, 14mm wrench and/or socket.

• Awl or similar tool.

• Crescent wrench (optional).

• Never attach the leaf bag dump rope to

any part of your body or clothing. Do

not hold onto the rope while towing the

sweeper.

• Attach the leaf bag dump rope to the

towing vehicle and make sure it is kept

away from wheels and rotating parts.

• If an object becomes lodged in the

sweeper, do not attempt to remove it

while the sweeper brush is moving.

• Only use the hitch for towing the trailer.

Do not attempt to use rope or chain for

towing.

To reduce the risk of injury when using this product:

-2- T10043 38" Lawn Sweeper

Unpacking

After all the parts have been removed from the

box, you should have the following items:

Box Contents (Figure 2) Qty

A. Leaf Bag (Not Shown) ................................ 1

B. Sweeper Assembly ..................................... 1

C. Leaf Bag Dump Rope ................................. 1

D. Hitch Tube Set ........................................... 1

Box Contents (Figure 3) Qty

E. Bag Frame Bar ........................................... 1

F. Support Rods ............................................. 2

G. Lower Bag Tubes ....................................... 2

H. Upper Bag Tubes ....................................... 2

I. Rear Bag Tubes ......................................... 2

J. Hitch Spacers ............................................. 2

K. Rubber Caps .............................................. 2

L. Height Adjustment Lever ............................ 1

M. Height Adjustment Lock Plate .................... 1

N. Flat Hitch Bracket ....................................... 1

O. Raised Hitch Bracket .................................. 1

P. Bag Mounting Tubes .................................. 2

Q. L Bracket .................................................... 1

Hardware (Figure 4) Qty

R. Hex Bolts M8-1.25 x 65 .............................. 2

S. Hex Bolts M8-1.25 x 55 .............................. 2

T. Hex Bolts M8-1.25 x 40 .............................. 2

U. Hex Bolts M8-1.25 x 16 .............................. 2

V. Hex Bolts M6-1 x 40 ................................... 4

W. Lock Nuts M6-1 .......................................... 4

X. Carriage Bolt M8-1.25 x 20 ........................ 1

Y. Lock Nuts M8-1.25 ..................................... 8

Z. Clevis Pins M6 x 33 ................................... 4

AA. Clevis Pins M8 x 50 ................................... 2

BB. Clevis Pins M10 x 15 ................................. 2

CC. Hairpin Cotter Pins 2mm ............................ 4

DD. Hairpin Cotter Pins 3mm ............................ 5

EE. Plastic Plugs ............................................... 4

FF. Fender Washer 8mm ................................. 1

GG. Spacer 15MM x 3.5mm .............................. 1

HH. Flat Washer 8mm ....................................... 1

II. Friction Washers 8mm ............................... 2

JJ. Knob ........................................................... 1

KK. Hitch Pin ..................................................... 1

If any nonproprietary parts are missing (e.g. a

nut or a washer), we will gladly replace them, or

for the sake of expediency, replacements can be

obtained at your local hardware store.

Figure 2. Box contents 1.

Figure 3. Box contents 2.

Figure 4. Hardware.

GG HH

-3- T10043 38" Lawn Sweeper

Assembly

1. Attach the hitch tubes to the sweeper assem-

bly as shown in Figure 5. Do not tighten the

hardware at this time. Refer to the inventory

figures on Page 2 for hardware identifica-

tion.

Note: Make sure the rear ends of the hitch

tubes angle slightly upward, as shown in

Figure 5, Detail A. If they angle downward,

this means the left tube is positioned on the

right side and vice-versa. Reverse the place-

ment of the hitch tubes, then attach them.

3. Tighten all hardware from Steps 1 and 2.

4. Insert the hitch pin and the hitch spacers, and

secure them with a 3mm hairpin cotter pin, as

shown in Figure 8.

Figure 6. Hitches under 11".

Flat Hitch Bracket

Raised Hitch Bracket

Hex Bolts

Hex Nuts (Obscured

From View)

Figure 7. Hitches over 11".

Flat Hitch Bracket

Raised Hitch Bracket

Hex Bolts

Hex Nuts (Obscured

From View)

Figure 8. Hitch Pin.

Hitch Pin

Spacers

Hairpin Cotter Pin

2. Measure the height of the hitch on your riding

lawn mower.

—If the mower hitch height is less than 11",

then assemble the sweeper as shown in

Figure 6.

—If the mower hitch height is more than 11",

then assemble the sweeper as shown in

Figure 7.

Assemble the hitch using the flat hitch brack-

et, the raised hitch bracket, the M8-1.25 x 55

hex bolts, and two of the M8-1.25 hex nuts.

Be sure the hex bolts fit between the hex

bolts from Step 1 (Figures 6 and 7).

Figure 5. Frame assembly.

Hitch Tubes

Sweeper

Assembly

W,X (x 2)

Upward Angle

S,Z (x 2)

Detail A Detail B

-4- T10043 38" Lawn Sweeper

5. Assemble the height adjustment lever, as

shown in Figure 9. Refer to the inventory fig-

ures on Page 2 for hardware identification.

Figure 9. Height adjustment lever.

Height Adjustment Lever Latch Plate

Knob

L Bracket

V,Z

II Z

6. Insert one of the rear bag tubes through the

loops in the leaf bag. Make sure the holes in

the tube are facing down, as shown in Figure

10.

Figure 10. Rear bag tube placement.

Rear Bag Tube

Leaf Bag

7. Insert the upper bag tube through the pocket

in the leaf bag and into the rear bag tube,

then secure it with a plastic plug, as shown in

Figure 11. Repeat for both sides.

Figure 11. Rear bag tube placement.

Leaf Bag Pocket

Plastic Plug

Upper Bag Tube

Rear Bag Tube

8. Assemble the lower bag tubes, the remain-

ing rear bag tube, and the remaining plastic

plugs, as shown in Figure 12. Make sure the

holes in the rear bag tube are facing up.

Figure 12. Lower leaf bag frame assembly.

Rear Bag Tube

Plastic Plugs

Lower Bag Tubes

Holes Facing Up

Holes Facing Down

-5- T10043 38" Lawn Sweeper

9. Place the assembled lower leaf bag frame

into the leaf bag and connect it to the upper

frame tubes with the M10 x 15 clevis pins

and two 3mm hairpin cotter pins, as shown in

Figure 13. Repeat for both sides.

Figure 13. Upper and lower frame connection.

Lower Leaf Bag Frame

Leaf Bag

Upper Frame Tube

Clevis Pin

Hairpin Cotter Pin

10. Connect the snaps, as shown in Figure 14,

then slide the bag frame bar into the pocket

in the leaf bag and secure it with two M6 x 33

clevis pins and two 2mm hairpin cotter pins.

12. Feel along the length of the upper bag tube

for the hole in the area indicated by the

Figure 16 inset. Puncture the leaf bag using

an awl or similar device, as shown. Attach

the bag mounting tube to the upper bag tube

with an M8 x 50 clevis pin, and secure it with

a 3mm hairpin cotter pin. Place a rubber cap

over the end of the bag mounting tube, as

shown in Figure 16. Repeat for both sides.

Figure 16. Bag mounting tube.

Upper Bag Tube

Bag Mounting Tube

Clevis Pin

Rubber Cap

Hairpin

Cotter Pin

11. Insert the two support rods between the

upper and lower bag frame assemblies, as

shown in Figure 15.

Figure 15. Support rods.

Figure 14. Bag frame bar.

Snaps

Pocket Bag Frame Bar

Clevis Pin

Hairpin Cotter Pin

Frame Assemblies

Support Rods

-6- T10043 38" Lawn Sweeper

Operations

The Model T10043 can be raised or lowered to

achieve the optimal sweeping height for different

surfaces.

Adjust the position of the brushes so that they

extend approximately ½" into the grass.

To adjust the brush height:

1. Loosen the height adjustment knob, then

reposition the height adjustment lever. When

the desired height is reached, tighten the

height adjustment knob (Figure 19).

Figure 8. Height adjustment.

13. Attach the leaf bag assembly to the sweeper

assembly using an M6 x 33 clevis pin and a

2mm hairpin cotter pin, as shown in Figure

17. Repeat for both sides.

Figure 17. Bag attachment.

Sweeper

Assembly

Leaf Bag

Assembly

Clevis Pin

Hairpin

Cotter Pin

14. Attach the leaf bag dump rope to the leaf bag

frame, as shown in Figure 18.

Figure 18. Rope attachment.

Leaf Bag Frame

Rope Tips for using the Model T10043 Lawn

Sweeper:

• Empty the leaf bag after every use.

• To dump the leaf bag, pull the leaf bag dump

rope forward or lift the rear of the leaf bag.

• For best results and ease of use, be sure the

height is properly adjusted for both the sur-

face being swept and the hitch height of the

mower.

• Follow the maintenance schedule outlined

in these instructions to prevent unnecessary

wear on your sweeper.

Height Adjustment Knob

Lock Plate

Height Adjustment Lever

Figure 19. Height Adjustment.

Make sure the leaf bag dump rope is

secured to the riding mower during use but

does not interfere with the operation of the

mower. Additionally, make sure the leaf bag

dump rope is not in a position to become

entangled in the wheels or brushes of the

sweeper. Failure to safely secure the rope

during use can damage the sweeper or

cause you to lose control of the mower.

-7- T10043 38" Lawn Sweeper

Every two years, the ratchet assemblies in each

wheel should be cleaned and greased.

Note: When performing this procedure, take

notes on the position of all washers, spacers,

and retaining rings. Work on one side at a time to

avoid mixing directional components.

To grease the ratchet assemblies:

1. Remove the dust cover, wheel nut, and

washer, as described in Step 2 of "To

Lubricate the Bushings", then remove the

wheel (Figure 23).

Figure 23. Wheel removed.

Ratchet Gear

Wheel

Maintenance

To prevent excessive wear, periodically lubricate

the brush shaft bushings, the wheel bushings,

and grease the ratchet assemblies in each wheel

unit.

To lubricate the bushings:

1. Tilt the sweeper onto its side and apply a few

drops of light oil to the brush shaft, as shown

in Figure 20.

Figure 20 Brush shaft bushing lubrication.

Apply Oil Here

Brush Shaft

2. With the sweeper still on its side, remove

the dust cap on the exposed wheel, then

remove the wheel nut and washer, as shown

in Figure 21.

Figure 22. Wheel nut removal.

3. Apply a few drops of light oil to the wheel

bushings, as shown in Figure 22, and spin

the wheel to distribute the oil. Replace the

washer, wheel nut, and the dust cap. Flip

the sweeper on to the other side and repeat

Steps 1-3 for the other bushings.

Figure 21. Wheel nut removal.

Wheel Nut

Washer

Dust Cap

Apply Oil Here

Brush Shaft

Bushing

-8- T10043 38" Lawn Sweeper

Figure 26. Brush assembly (end view).

Brush

Rotation

Brush

Rotation

Remove

Overlap Bristles

With extensive use, the brushes on the Model

T10043 may become worn and require replace-

ment.

To replace the brushes:

1. Tilt the sweeper all the way forward to allow

easy access to the brushes. For the sake of

simplicity, only replace one brush at a time.

2. Remove the lock nuts and hex bolts indicated

in Figure 26, and remove the old brushes.

It is not necessary to remove the bolts and

nuts connecting the brush holder to the brush

shaft.

2. Remove the retaining clip from the brush

shaft, then remove the spacers (Figure 24).

Figure 25. Ratchet gear assembly.

Ratchet Gear

Ratchet Pin

Brush Shaft

4. Thoroughly clean, then grease the parts

using multi-purpose grease. Re-assemble in

the reverse order from disassembly.

5. Repeat for the other wheel.

3. Remove the ratchet gear, the spacers on

either side of the ratchet gear, and the ratchet

pin (Figure 25).

Figure 24. Ratchet gear assembly.

Ratchet Gear

Retaining Clip

Brush Shaft

Ratchet Gear

Spacers

3. Install the new brush, making sure the over-

lap bristles are properly oriented in relation-

ship to the direction of brush rotation, as

shown in Figure 26. Tighten the hex nuts.

-9- T10043 38" Lawn Sweeper

T10043 Parts & Labels Breakdown



























 

























 









 





 





 

















































 





























 















T10043 Parts & Labels List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PT10043001 RIGHT HITCH TUBE 42 PB94M HEX BOLT M5-.8 X 25

2 PT10043002 LEFT HITCH TUBE 43 PT10043043 WHEEL BACKING PLATE

3 PT10043003 RIGHT SIDE ENDPLATE 44 PT10043044 REAR BAG TUBE

4 PT10043004 LEFT SIDE ENDPLATE 45 PT10043045 UPPER BAG TUBE

5 PT10043005 SWEEPER BODY 46 PT10043046 LOWER BAG TUBE

6 PB02M HEX BOLT M6-1 X 12 47 PT10043047 PLASTIC PLUG

7 PS08M PHLP HD SCR M5-.8 X 12 48 PT10043048 LEAF BAG

8 PT10043008 REAR SUPPORT BRACE 49 PT10043049 CLEVIS PIN M10 X 15

9 PB03M HEX BOLT M8-1.25 X 16 50 PT10043050 BAG FRAME BAR

10 PT10043010 ANGLE BRACKET 51 PT10043051 SUPPORT ROD

11 PT10043011 OUTER SHAFT FLANGE 52 PT10043052 BASKET ROPE

12 PT10043012 HEIGHT ADJUST TUBE ASSEMBLY 53 PT10043053 END CAP

13 PB15M HEX BOLT M8-1.25 X 40 54 PT10043054 HEIGHT ADJUST LOCK PLATE

14 PLN02M LOCK NUT M5-.8 55 PT10043055 RAISED HITCH BRACKET

15 PT10043015 WHEEL SPACER 56 PT10043056 FLAT HITCH BRACKET

16 PLN03M LOCK NUT M6-1 57 PT10043057 HEIGHT ADJUST LEVER

17 PT10043017 SPECIAL WASHER 58 PT10043058 BAG MOUNTING TUBE

18 PT10043018 INNER SHAFT FLANGE 59 PT10043059 CLEVIS PIN M8 X 50

19 PT10043019 BRUSH SHAFT BUSHING 60 PT10043060 WHEEL ASSEMBLY

20 PT10043020 BRUSH SHAFT 61 PT10043061 WHEEL BUSHING

21 PT10043021 BRUSH 62 PB86M HEX BOLT M8-1.25 X 65

22 PB08M HEX BOLT M6-1 X 20 63 PB22M HEX BOLT M8-1.25 X 50

23 PLN03M LOCK NUT M6-1 65 PB52M HEX BOLT M6-1 X 35

24 PT10043024 BRUSH HOLDER 66 PT10043066 SPACER

25 PT10043025 BRUSH HOLDER CLAMP 67 PT10043067 KNOB

27 PT10043027 RATCHET PIN 68 PCB30M CARRIAGE BOLT M8-1.25 X 30

28 PB03M HEX BOLT M8-1.25 X 16 69 PW01M FLAT WASHER 8MM

29 PLN04M LOCK NUT M8-1.25 70 PT10043070 RUBBER GRIP

30 PT10043030 AXLE SPACER 71 PWF08M FENDER WASHER 8MM

31 PT10043031 OUTER SPACER 72 PT10043072 HITCH PIN

32 PT10043032 BUSHING 73 PT10043073 HITCH SPACER

33 PR05M EXT RETAINING RING 15MM 74 PT10043074 HAIRPIN COTTER PIN 3MM

34 PT10043034 INNER SPACER 75 PT10043075 HAIRPIN COTTER PIN 2MM

35 PW04M FLAT WASHER 10MM 76 PT10043076 CLEVIS PIN M6 X 33

36 PLN05M LOCK NUT M10-1.5 77 PB03M HEX BOLT M8-1.25 X 16

37 PT10043037 WHEEL DUST CAP 80 PTLW17M INT TOOTH WASHER 5MM

38 PT10043038 HEX BOLT M10-1.5 X 85 81 PT10043081 FRICTION WASHER 8MM

39 PT10043039 SPACER BUSHING 82 PT10043082 GRIZZLY 1-800 LABEL

40 PT10043040 RATCHET GEAR RIGHT 83 PT10043083 GRIZZLY.COM LABEL

41 PT10043041 RATCHET GEAR LEFT

Inhaltsverzeichnis

Andere Grizzly Rasenkehrmaschine Handbücher

Grizzly

Grizzly T10042 Bedienungsanleitung

Beliebte Rasenkehrmaschine Handbücher anderer Marken

Starmix

Starmix StarSweep 65 Bedienungsanleitung

HAKO

HAKO Hako-Profi-Flipper Bedienungsanleitung

RedMax

RedMax RMSZ2500 Betriebsanleitung

Black & Decker

Black & Decker GWC1800L Bedienungsanleitung

Sanitaire

Sanitaire SC6093A Bedienungsanleitung

Zenoah

Zenoah RMSZ2601 Bedienungsanleitung

Craftsman

Craftsman 486.242231 Bedienungsanleitung

YARD Commander

YARD Commander SP31128 Bedienungsanleitung

Agri-Fab

Agri-Fab 45-0570 Bedienungsanleitung

FLORABEST

FLORABEST FKM 2400 A1 Bedienungsanleitung

Craftsman

Craftsman 486.24212 Bedienungsanleitung

Kärcher

Kärcher KM 120 Bedienungsanleitung

Agri-Fab

Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Bedienungsanleitung

Nordic

Nordic WS-L0118 Bedienungsanleitung

Smithco

Smithco 72-000-A Bedienungsanleitung

Parker

Parker Suburbanite 895803 Bedienungsanleitung

Agri-Fab

Agri-Fab 45-0290 Bedienungsanleitung

Agri-Fab

Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Bedienungsanleitung