Grizzly T32795 Bedienungsanleitung

NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

(FOR MODELS MFD. SINCE 07/21) #CS21970 PRINTED IN CHINA

Introduction

The Model T32795 Shears Sharpening Jig is

a fixture designed for sharpening scissors and

shears on the Model T32720 10" Wet Grinder.

Description Qty

A. Jig ............................................................... 1

B. Clamp ......................................................... 1

C. Knob Bolts M6-1 x 22 ................................. 2

Inventory

Figure 1. Example of Model T32795 in use.

V1.06.21

To reduce your risk of

serious injury, read this

entire manual BEFORE

using machine.

NOTICE

If you cannot find an item on this list, care-

fully check around/inside the machine and

packaging materials. Often, these items get

lost in packaging materials while unpack-

ing or they are pre-installed at the factory.

Figure 2. Inventory.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

MODEL T32795

SHEARS SHARPENING JIG

FOR T32720 WET GRINDER

INSTRUCTIONS

-2- Model T32795 (Mfd. Since 07/21)

Using Jig

Attach the jig support to the tool rest on your

Model T32720 10" Wet Grinder to sharpen scis-

sors, shears, and clippers.

To use jig:

1. DISCONNECT GRINDER FROM POWER!

2. Install tool rest in vertical position so it is

about 1" away from grinding wheel.

3. Slide jig onto tool rest and secure with (2)

M6-1 x 22 knob bolts (see Figure 3).

Eye and face injuries and respiratory prob-

lems can occur while operating this tool.

Wear personal protective equipment to

reduce your risk from these hazards.

Keep hair, clothing, and

jewelry away from mov-

ing parts at all times.

Entanglement can result

in death, amputation, or

severe crushing injuries!

Figure 3. Jig installed on tool rest.

x 2

Tool Rest

Jig

4. Loosen (2) clamp knobs on clamp enough to

allow one blade of scissors or shears to slide

in (see Figure 4).

5. Loosen (2) lock knobs on clamp enough so

they do not extend through upper portion of

clamp (see Figure 4).

Lock Knob

(1 of 2)

Clamp Knob

(1 of 2)

Figure 4. Clamp components.

6. Insert (1) blade of scissors or shears into

clamp, as shown in Figure 5, and tighten

clamp knob to secure.

Note: If blade extends to second triangle

clamp, tighten both clamp knobs.

7. Tighten lock knob to secure (see Figure 5).

Note: If blade extends to second triangle

clamp, tighten both lock knobs.

Figure 5. Example of scissor blade secured in

clamp.

Clamp Knob

(1 of 2)

Lock Knob

(1 of 2)

Triangle

Clamp

(1 of 2)

Model T32795 (Mfd. Since 07/21) -3-

8. Rest clamp against rails of jig and grinding

wheel (see Figure 6).

9. Adjust tool rest closer to or further from grind-

ing wheel and angle of jig until beveled edge

of blade sits flat against grinding wheel (see

Figure 6).

Grinding Wheel

Sharpening

Jig

Scissor

Blade

Rails

Beveled

Edge

Figure 6. Adjusting angles for beveled edge of

scissor blade.

10. Tilt scissor jig away from grinding wheel, con-

nect grinder to power, and turn machine ON.

11. Use firm grip to return scissor blade to sur-

face of grinding wheel to perform operation.

Use smooth stroking motion and even pres-

sure with beveled edge of blade flat against

grinding wheel and against wheel rotation

(see Figure 7).

Figure 7. Example of grinding scissor blade.

Andere Grizzly Elektrowerkzeuge Handbücher

Grizzly

Grizzly Extreme Series Bedienungsanleitung

Grizzly

Grizzly G9927 Bedienungsanleitung

Grizzly

Grizzly G1182 Bedienungsanleitung

Grizzly

Grizzly G1778 Bedienungsanleitung

Grizzly

Grizzly G4016 Bedienungsanleitung

Grizzly

Grizzly G5912Z Bedienungsanleitung

Grizzly

Grizzly H6069 Kurzanleitung

Grizzly

Grizzly G4017 Bedienungsanleitung

Grizzly

Grizzly T1244 Bedienungsanleitung

Grizzly

Grizzly G0483 Kurzanleitung

Grizzly

Grizzly Extreme Series Bedienungsanleitung

Grizzly

Grizzly H2801 Bedienungsanleitung

Grizzly

Grizzly G0608X Bedienungsanleitung

Grizzly

Grizzly H3236 Bedienungsanleitung

Grizzly

Grizzly G0836 Bedienungsanleitung

Grizzly

Grizzly G0604X EXTREME SERIES Bedienungsanleitung

Grizzly

Grizzly T10827 Bedienungsanleitung

Grizzly

Grizzly G0634 Kurzanleitung

Grizzly

Grizzly H0778 Bedienungsanleitung

Grizzly

Grizzly G0452Z Bedienungsanleitung

Grizzly

Grizzly G0827 Bedienungsanleitung

Grizzly

Grizzly G0725 Bedienungsanleitung

Grizzly

Grizzly G0654 Bedienungsanleitung

Grizzly

Grizzly H2871 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch