Grizzly T10880 Bedienungsanleitung

Model T10880 & T10881

G0442 & G0601 Cartridge Filter Replacement

with HEPA Filter Upgrade Kit

Step One:

Remove the filter L-braces from the blower housing, as shown above, by loosening and removing (6) 5/16” x

1” hex bolts, (12) 5/16” flat washers, and (6) 5/16” hex nuts. Remove and set the cartridge filter aside.

Step Two:

Remove the outlet port from the blower housing by loosening and removing (4) 5/16” x 1” hex bolts, (8) 5/16”

flat washers, and (4) 5/16” hex nuts.

Step Three:

Remove the mounting bracket that secures the intake barrel to the upper stand leg by loosening and removing (8)

5/16” x 1” hex bolts, (16) 5/16” flat washers, and (8) 5/16” nuts. Next, loosen and remove (8) 3/8” x 3/4” hex

bolts, (16) 3/8” flat washers, and (8) 3/8” nuts on the leg stand side. NOTE: Replace the mounting brackets with

the new types one at a time. DO NOT remove all old mounting brackets at once.

Step Four:

After each mounting bracket has been replaced with the new type, make sure to tighten all the bolts and nuts

securely before moving on to the next step.

Step Five:

Attach the rubber gasket to the outlet opening on the blower housing, then attach the outlet connector by

securing and fastening (10) 3/8” x 1” hex bolts, (20) 3/8” flat washers, and (10) 3/8” nuts.!

Step Six:

Assemble the HEPA leg stand, which consists of three segments: upper, middle and lower. Secure and fasten

using (8) 3/8” x 1” hex bolts, (16) 3/8” flat washers, and (8) 3/8” nuts. !

Step Seven:

Attach the HEPA leg stand to the outlet connector, as shown above, by securing and fastening (4) 3/8” x 1” hex

bolts, (8) 3/8” flat washers, and (4) 3/8” nuts. !

Step Eight:

Attach the rubber gasket to the square top of the HEPA filter, as shown above. Take the filter adapter and attach

it to the square top of the HEPA filter with (16) 5/16” x 1” hex bolts and 5/16” flat washers. Tighten and secure

all bolts and nuts.

Step Nine:

Attach the rubber gasket to the outlet opening, then attach the filter adapter and HEPA filter to the blower

housing with (16) 3/8” x 1” hex bolts, (30) 3/8” flat washers, and (14) 3/8” nuts. Tighten and secure all bolts

and nuts.

Step Ten:

Fit the plastic canister collection bag over the bottom of the HEPA canister filter, and clamp in place with the

metal bag clamp, as shown above.

UPGRADE COMPLETE!

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Grizzly Wasserfiltersystem Handbücher

Grizzly

Grizzly G0738 Bedienungsanleitung

Grizzly

Grizzly G5955 Bedienungsanleitung

Grizzly

Grizzly G0863 Bedienungsanleitung

Grizzly

Grizzly G0572 Bedienungsanleitung

Grizzly

Grizzly T10882 Bedienungsanleitung

Grizzly

Grizzly T33150 Bedienungsanleitung

Grizzly

Grizzly H3258 Bedienungsanleitung

Grizzly

Grizzly G9956 Bedienungsanleitung

Grizzly

Grizzly G0572 Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung