Ground logic Rover Bedienungsanleitung

15105863_-_HI

ROVER, ROVER XR

OPERATOR’S MANUAL

Congratulations on the purchase of your Ground Logic, Inc. machine.

This product has been carefully designed and manufactured to be a de-

pendable piece of equipment that will provide years of trouble-free opera-

tion.

BEFORE OPERATING YOUR MACHINE, CAREFULLY READ AND UN-

DERSTAND THIS MANUAL IN ITS ENTIRETY.

For future reference, place the serial number of the machine and date of

purchase below:

Serial Number: ________________

Date of Purchase: _____________

GROUND LOGIC, INC.

ROV-12000-2 AND ROV-22000-2

S/N: 2018036122 & Above

1.1 Table of Specications

1.2 Operator Controls

2.1 Proposition 65 Statement

2.2 Operating Safely

2.3 Chemical Safety

2.4 Training

2.5 Preparation

2.6 Children

2.7 Safe Handling of Gasoline

4.1 Operation

4.2 User Controls

4.3 Before First Time Operation

4.4 Pre-Start

4.5 Starting the Machine

4.6 Stopping the Machine

4.7 Transporting the Machine

4.8 Operating the Spreader

6.1 Spreader Flow Rate Calibration

6.2 Centering the Spread Pattern

7.1 Maintenance and Storage Safety

7.2 Periodic Service Intervals

8.1 Machine Does Not Start

8.2 Spreading System Operates Incorrectly

1. MACHINE SPECIFICATIONS

TABLE OF CONTENTS

2. GENERAL OPERATIONAL SAFETY

4. OPERATING INSTRUCTIONS

6. CALIBRATION

7. MAINTENANCE, STORAGE, AND SERVICE

8. FAULT ISOLATION

9. WARRANTY INFORMATION

4-5

6-7

7-8

17-18

18-19

21-22

22-24

26-27

5. SLOPE OPERATIONAL SAFETY

5.1 Slope Identication Guide

5.2 Slope Operation

5.3 Operating on Slopes

19-20

20-21

3. SAFETY AND INSTRUCTIONAL DECALS

3.1 Introduction to Safety Alert Symbols and Signal Words

3.2 Safety Icons and Warning Decals

3.3 Instructional Decals

3.4 Honda Engine Decals and Engine Controls

9-10

10-11

35105863_-_HI

MODEL NUMBER This manual is for model number 5901723

(ROV-12000-2).

This manual is for model number 5901724

(ROV-22000-2).

ENGINE •Engine Model: GX160-URH2

•Engine specications: See your Honda

engine owner’s manual.

•RPM:

o Full speed: 3750 rpm (no load)

o Idle: 1400 rpm.

•2:1 gear reduction with wet clutch.

•Engine Model: GX160-URH2

•Engine specications: See your Honda

engine owner’s manual.

•RPM:

o Full speed: 3750 rpm (no load)

o Idle: 1400 rpm.

•2:1 gear reduction with wet clutch.

FUEL SYSTEM •Capacity: 0.82 gal (3.1 L).

•Type of fuel: Regular unleaded gasoline, 87

octane or higher.

•Fuel shut-off valves: Located on engine.

•Capacity: 0.82 gal (3.1 L).

•Type of fuel: Regular unleaded gasoline, 87

octane or higher.

•Fuel shut-off valves: Located on engine.

TRANSMISSION •Transmission Model: Peerless 855 Series.

•Gear selections: 2 forward, 1 reverse,

neutral.

•Speed: 3.5 mph (5.6 km/hour) low gear, 5.0

mph (8.0 km/hour) high gear.

•Transmission Model: Peerless 855 Series.

•Gear selections: 2 forward, 1 reverse,

neutral.

•Speed: 3.5 mph (5.6 km/hour) low gear, 5.0

mph (8.0 km/hour) high gear.

TIRES AND WHEELS •Front tires: 18” x 950 – 8, RV antifreeze

added for ballast and traction.

•Rear tires: 13” x 650

•Front tires: 18” x 950 – 8, RV antifreeze

added for ballast and traction.

•Rear tires: 13” x 650

SPREADER •Spreader model: Spyker 120 Series.

•Capacity: 120 lb.

•Spreader model: Spyker 220 Series.

•Capacity: 220 lb.

DIMENSIONS •Overall length: 53.0” (137 cm).

•Overall width: 35.5” (90 cm).

•Overall height: 49.0” (124 cm).

•Weight:

o 320 lb. (145 kg) dry

o 440 lb. (200 kg) full

o 640 lb. (290 kg) full with 200 lb. (91 kg)

rider.

•Overall length: 54.0” (137 cm).

•Overall width: 35.5” (90 cm).

•Overall height: 49.0” (124 cm).

•Weight:

o 330 lb. (150 kg) dry

o 550 lb. (249 kg) full

o 750 lb. (340 kg) full with 200 lb. (91 kg)

rider.

ELECTRICAL

SYSTEM

•Charging system: N/A

•Charging capacity: N/A

•Safety interlock system: This machine is

equipped with a neutral safety start module.

To start the engine, the transmission must be

in the neutral (N) position.

•Charging system: N/A

•Charging capacity: N/A

•Safety interlock system: This machine is

equipped with a neutral safety start module. To

start the engine, the transmission must be in

the neutral (N) position.

1. MACHINE SPECIFICATIONS

1.1 TABLE OF SPECIFICATIONS

ROVER ROVER XR

1. MACHINE SPECIFICATIONS CONTINUED

1.2 OPERATOR CONTROLS

• The handlebars provide access to most of the machine controls.

• Turning the handlebars while standing on the operator platform provides steering control.

• Squeezing the throttle lever on the right side of the handlebars provides speed control.

• Depressing the brake pedal on the operator platform provides braking control.

• The gate lever controls the ow of granular product out of the hopper.

• The engine ignition switch controls the operation or shutdown of the engine.

• The spread control lever controls the center of the spread pattern of granular product.

• The gate stop on the front of the hopper controls the maximum gate opening for granular product.

2. GENERAL OPERATIONAL SAFETY

2.1 PROPOSITION 65 STATEMENT

WARNING

This product can expose you to chemicals including gasoline engine exhaust, which is known to the State of

California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth de-

fects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of the

unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

2.2 OPERATING SAFELY

The safety alert triangle ( ) in text signies important caustions or warnings which must be followed.

Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are de-

signed and manufactured to meet or exceed all industry standards for safety.

Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual

is a way to train yourself.

Figure 1

55105863_-_HI

2. GENERAL OPERATIONAL SAFETY

2.2 OPERATING SAFELY CONTINUED

Keep both feet on the operator platform at all times. Power equipment is only as safe as the operator. If it is

misused, or not properly maintained, it can be dangerous! Remember, you are responsible for your safety and

that of those around you.

Use common sense, and think through what you are doing. If you are not sure that the task you are about to

perform can be safely done with the equipment you have chosen, ask a professional: contact your local autho-

rized dealer.

2.3 CHEMICAL SAFETY

WARNING

Chemicals used in this machine such as herbicides and pesticides may be hazardous to apply and produce

gasses that are hazardous if inhaled or with contact to your skin. Caustic liquid or chemical burns could occur

if chemicals are not used properly.

• Read and follow all the instructions and warnings on Material Safety Data Sheets (MSDS) from manu-

facturer for all chemicals used.

• Become familiar with and follow all warnings, recommendations, instructions and procedures for: rst

aid measures, safe use, mixing, handling, applying, spills clean-up, storage and disposal of all chemi-

cals as listed on the manufacturer’s label or MSDS of any herbicides, pesticides or other chemicals.

• Wear all personal protective equipment as recommended on the manufacturer’s label or MSDS of any

herbicides, pesticides or other chemicals. Personal protective equipment may include safety glasses

or goggles and/or face shields, chemical resistant gloves, rubber boots, and a respirator or air purifying

lter mask.

• Before working on this machine, valve system and hopper has been thoroughly rinsed according to

the recommendations of the chemical manufacturer (see MSDS and product labels).

• Obtain the proper training before using or handling any chemicals. Follow all local, state and federal

requirements for the handling and spreading of chemicals.

• Be sure to verify there is an adequate supply of clean water and soap nearby and immediately wash

off any chemicals that may contact you.

• Handle chemicals in a well-ventilated area.

• Keep clean water available for immediate rinsing off and clean-up of any spilled chemicals.

• Never enter the hopper with your unprotected hands, or place your mouth or face over or into this

opening. Chemicals and fumes may be hazardous to your health.

WARNING

• Reduce your speed and minimize the weight of your load (in the hopper) when operating on hills or

rough terrain to avoid possible instability, tipping or rollover of the machine.

• Granular materials in the hopper may shift during operation. This is most common while turning,

going up, down or across hills, when suddenly changing speed, or operating on rough terrain. This shift

in load may cause possible instability, tipping or rollover of the machine. Reduce your speed in these

situations.

2. GENERAL OPERATIONAL SAFETY CONTINUED

2.4 TRAINING

• Read, understand, and follow all instructions in the manual and on the unit before starting. If the

operator(s) or mechanic(s) cannot read English it is the owner’s responsibility to explain this material to

them.

• Become familiar with the safe operation of the equipment, operator controls, and safety signs.

• All operators and mechanics should be trained. The owner is responsible for training the users.

• Only allow responsible adults, who are familiar with the instructions, to operate the unit.

• Never let children or untrained people operate or service the equipment. Local regulations may restrict

the age of the operator.

• The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other

people or property.

2.5 PREPARATION

• Evaluate the terrain to determine what accessories and attachments are needed to properly and

safely perform the job. Use only accessories and attachments approved by the manufacturer.

• Wear appropriate clothing including safety shoes, safety glasses and ear protection. Long hair, loose

clothing or jewelry may get tangled in moving parts.

• Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and

wire, which can be thrown by the machine.

• Use extra care when handling gasoline and other fuels. They are ammable and vapors are explosive.

• Use only an approved container for gasoline.

• Never remove fuel cap or add fuel with the engine running. Allow engine to cool before refueling. Do

not smoke. Never refuel or drain the machine indoors.

• Check that safety switches and shields are attached and functioning properly. Do not operate unlesss

they function properly.

• Become familiar with and follow all warnings, recommendations, instructions and procedures for safe

use, handling, applying, storage and disposal of all chemicals as listed on the manufacturer’s label of

any herbicides, pesticides or other chemicals.

• Wear all personal protective equipment as recommended on the manufacturer’s label or MSDS of any

herbicides, pesticides or other chemicals. Personal protective equipment may include safety glasses or

goggles and/or face shields, chemical resistant gloves, rubber boots and a respirator or lter mask.

WARNING

It is a violation of California Public Resource Code, Section 4442, to use or operate the engine on any for-

est-covered, brush-covered or grass-covered land unless the exhaust system is equipped with a spark arrest-

er, as dened in Section 4442, maintained in effective working order. Other states or federal jurisdictions may

have similar laws. Contact an Authorized Service Dealer to obtain a spark arrester designed for the exhaust

system installed on this engine.

• OSHA regulations may require the use of hearing protection when exposed to sound levels greater

than 85 dBA for an 8 hour time period.

75105863_-_HI

2. GENERAL OPERATIONAL SAFETY CONTINUED

CAUTION

This machine produces sound levels in excess of 85 dBA at the operator’s ear and can cause hearing loss

though extended periods of exposure. Wear hearing protection when operating this machine.

2.6 CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to

the unit and the operating activity. Never assume that children will remain where you last saw them.

• Keep children out of the operating area and under the watchful care of another responsible adult.

• Be alert and turn unit off if children enter the area.

• Before and during reverse operation, look behind and down for small children.

• Never carry children, even with spreader spinner off. They may fall off and be seriously injured or

interfere with safe unit operation. Children who have been given rides in the past may suddenly appear

in the operation area for another ride and be run over or backed over by the machine.

• Never allow children to operate the unit.

• Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure

vision.

2.7 SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely

ammable and the vapors are explosive.

• Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

• Use only approved gasoline containers.

• Never remove the gas cap or add fuel with the engine running. Allow the engine to cool before

refueling.

• Never fuel the machine indoors.

• Never store the machine or fuel container where there is an open ame, spark, or pilot light such as

near a water heater or other appliance.

• Never ll containers inside a vehicle or on a truck bed with a plastic bed liner. Always place containers

on the ground away from your vehicle before lling.

• Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not

possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline

dispenser nozzle.

• Keep nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is

complete. Do not use a nozzle lock-open device.

• If fuel is spilled on clothing, change clothing immediately.

2. GENERAL OPERATIONAL SAFETY CONTINUED

2.7 SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely

ammable and the vapors are explosive.

• Never over-ll the fuel tank. Replace gas cap and tighten securely.

• Use extra care in handling gasoline and other fuels. They are ammable and vapors are explosive.

• If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spill-

age and avoid creating any source of ignition until fuel vapors have dissipated.

• Replace all fuel tank caps and fuel container caps securely.

3. SAFETY AND INSTRUCTIONAL DECALS

3.1 INTRODUCTION TO SAFETY ALERT SYMBOLS AND SIGNAL WORDS

Before operating your unit, read the safety decals. The cautions and warnings are for your safety. To avoid a

personal injury or damage to the unit, understand and follow all safety decals.

The safety alert symbol is used to identify safety information about hazards that can result in personal in-

jury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood

and the potential severity of injury. In addition, a hazard symbol may be used to represent the type of hazard.

DANGER indicates a hazard which, if not avoided, will result in death or serious injury.

WARNING indicates a hazard which, if not avoided, could result in death or serious injury.

CAUTION indicates a hazard which, if not avoided, could result in minor or moderate injury.

NOTICE indicates a situation that could result in damage to the product.

WARNING

If any safety decals become worn or damaged, and cannot be read, order replacement decals from your local

dealer.

95105863_-_HI

3. SAFETY AND INSTRUCTIONAL DECALS CONTINUED

3.2 SAFETY ICONS AND WARNING DECALS

Figure 2: Safety Icons

Explanation of Icons in Figure 2

Callout Description

A Alert

B Read the Manual

C Thrown Objects

D Slope Direction for Safe Operation

E Amputation - Rotating Parts

F Caustic Liquid/Chemical Burn

G Gas Inhilation Hazard

Figure 3: Explanation of Icons in Figure 2

Figure 4: Amputation and Pinch Point Hazard Decal

3. SAFETY AND INSTRUCTIONAL DECALS CONTINUED

3.2 SAFETY ICONS AND WARNING DECALS CONTINUED

3.3 INSTRUCTIONAL DECALS

Figure 5: Warning and Danger Combination Decal

Figure 6: Foot Break Decal

Foot Brake Decal: See section 4.2 CONTROLS for brake pedal operating instructions.

Releasing the brake pedal disengages the band brakes on the rear wheels (OFF position).

Depressing the brake pedal engages the band brakes on the rear wheels (ON position).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ground logic Spritzpistole Handbücher

ground logic

ground logic Pathfinder Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Graco

Graco 246737 Gebrauchs- und Pflegehandbuch

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

Conrad

Conrad Hobby Airbrush K3 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

ground logic Rover Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken