Grundfos CIM 500 Bedienungsanleitung

CIM 500 Ethernet module

Installation and operating instructions

CIM 500 Ethernet

Installation and operating instructions

Other languages

http://net.grundfos.com/qr/i/98407037

GRUNDFOS INSTRUCTIONS

CIM 500 Ethernet module

English (GB)

Installation and operating instructions ..................................4

Deutsch (DE)

Montage- und Betriebsanleitung .....................................27

Dansk (DK)

Monterings- og driftsinstruktion ......................................51

Español (ES)

Instrucciones de instalación y funcionamiento............................74

Suomi (FI)

Asennus- ja käyttöohjeet ..........................................97

Français (FR)

Notice d'installation et de fonctionnement..............................120

Italiano (IT)

Istruzioni di installazione e funzionamento .............................143

Português (PT)

Instruções de instalação e funcionamento .............................166

Română (RO)

Instrucţiuni de instalare şi utilizare...................................189

中文 (CN)

安装和使用说明书 ..............................................212

日本語 (JP)

取扱説明書...................................................233

한국어 (KO)

설치 및 작동 지침 ..............................................256

Appendix A..................................................279

Appendix B..................................................298

Declaration of conformity .......................................299

Declaration of conformity .......................................300

Operating manual EAC .........................................302

Table of contents

English (GB) Installation and operating instructions

Original installation and operating instructions

Table of contents

1. General information ............. 4

1.1 Hazard statements .............. 4

1.2 Notes ..................... 4

2. Applications ................. 5

2.1 Abbreviations ................. 5

2.2 CIM 500 Ethernet module .......... 6

3. Installation .................. 7

3.1 Security .................... 7

3.2 Connecting the Ethernet cable ........ 8

3.3 Selection of Industrial Ethernet protocol . .. 9

3.4 Setting the IP addresses ........... 9

3.5 Connection to the webserver .........10

4. Status LEDs .................11

5. Data activity and link LEDs .........12

6. Fault finding .................13

6.1 PROFINET IO.................13

6.2 Modbus TCP or BACnet IP ..........15

6.3 EtherNet/IP ..................17

6.4 GRM IP ....................19

7. Technical data ................21

7.1 PROFINET technical specifications .....22

7.2 Modbus TCP technical specifications ....23

7.3 BACnet IP technical specifications ......23

7.4 EtherNet/IP technical specifications .....25

8. Disposing of the product ..........26

1. General information

Read this document before you install the

product. Installation and operation must

comply with local regulations and accepted

codes of good practice.

1.1 Hazard statements

The symbols and hazard statements below may

appear in Grundfos installation and operating

instructions, safety instructions and service

instructions.

DANGER

Indicates a hazardous situation which, if

not avoided, will result in death or serious

personal injury.

WARNING

Indicates a hazardous situation which, if

not avoided, could result in death or

serious personal injury.

CAUTION

Indicates a hazardous situation which, if

not avoided, could result in minor or

moderate personal injury.

The hazard statements are structured in the following

way:

SIGNAL WORD

Description of the hazard

Consequence of ignoring the warning

• Action to avoid the hazard.

1.2 Notes

The symbols and notes below may appear in

Grundfos installation and operating instructions,

safety instructions and service instructions.

Observe these instructions for explosion-

proof products.

A blue or grey circle with a white graphical

symbol indicates that an action must be

taken.

A red or grey circle with a diagonal bar,

possibly with a black graphical symbol,

indicates that an action must not be taken

or must be stopped.

If these instructions are not observed, it

may result in malfunction or damage to the

equipment.

Tips and advice that make the work easier.

English (GB)

2. Applications

The CIM 500 Ethernet module enables data

transmission between an Industrial Ethernet network

and a Grundfos product.

The module supports various Industrial Ethernet

protocols.

The module is fitted in the product to be

communicated with in a CIU 90x to form a CIU 50x or

in an E-box to form an E-box 500.

Retrofitting of the module is described in the

installation and operating instructions of the Grundfos

product.

Configuration is done via the built-in webserver, using

a standard web browser on a PC.

You can download the specific functional profile for

the product in question from Grundfos Product

Center.

Related information

3.3 Selection of Industrial Ethernet protocol

2.1 Abbreviations

APDU Application Protocol Data Unit.

ARP Address Resolution Protocol. Translates

IP addresses to MAC addresses.

CAT5 Ethernet cable type with four twisted-pair

cables.

CAT5e Enhanced CAT5 cable with better

performance.

CAT6 Ethernet cable compatible with CAT5 and

CAT5e, and with very high performance.

CIM Communication Interface Module.

CIU Communication Interface Unit.

DHCP

Dynamic Host Configuration Protocol.

Used to configure network devices so

that they can communicate via an IP

network.

DNS Domain Name System. Used to resolve

host names to IP addresses.

E-box

Extension Box. Used as a

communication interface between a

Grundfos DDA dosing pump (small) and

a fieldbus.

GENIpro

Grundfos Electronics Network

Intercommunication protocol. Proprietary

Grundfos fieldbus protocol.

GiC Grundfos iSOLUTIONS Cloud.

GND Ground.

GRM Grundfos Remote Management.

HTTP

Hyper Text Transfer Protocol. The

protocol commonly used to navigate

the World Wide Web.

IANA Internet Assigned Numbers Authority.

IP Internet Protocol.

LED Light-emitting diode.

MAC Media Access Control. Unique address

for a piece of hardware.

MDI Medium Dependent Interface.

Ping

Packet InterNet Groper. A software utility

that tests connectivity between two

TCP/IP hosts.

PLC Programmable Logic Controller.

RJ45

Registered Jack #45, also called 8P8C

modular connector type. Connects four

twisted-pair cables. Most common

Ethernet connector type.

SELV Separated or Safety Extra-Low Voltage.

SELV-E Separated or Safety Extra-Low Voltage

with earth.

TCP

Transmission Control Protocol. Protocol

for Internet communication and Industrial

Ethernet communication.

UDP User Datagram Protocol.

URL Uniform Resource Locator. The IP

address used to connect to a server.

VPN Virtual Private Networks.

English (GB)

2.2 CIM 500 Ethernet module

34 5 6 78

TM057431

CIM 500 Ethernet module

Pos. Designation Description

1 ETH1 Industrial Ethernet RJ45

connector 1

2 ETH2 Industrial Ethernet RJ45

connector 2

3 DATA1 Data activity LED for RJ45

connector 1

4 LINK1 Link LED for RJ45 connector

5 DATA2 Data activity LED for RJ45

connector 2

6 LINK2 Link LED for RJ45 connector

7 LED1

Red and green status LED

for the selected Ethernet

protocol

8 LED2

Red and green LED for

internal communication

between CIM 500 and the

Grundfos product

9 SW1 Rotary switch for selection of

Industrial Ethernet protocol

Related information

5. Data activity and link LEDs

English (GB)

3. Installation

WARNING

Electric shock

Death or serious personal injury

‐Connect CIM 500 only to SELV or

SELV-E circuits.

QR99462331

QR code for the CIU quick guide

3.1 Security

The connected Grundfos products must be behind a

firewall or connected to a private network.

If a firewall or private network is not in place, the

Grundfos product may be subject to a cyber-security

risk and becomes vulnerable to an attack or

compromise.

Follow the highly recommended configuration

requirements below. If in doubt, consult an IT

Infrastructure Specialist.

Related information

3.5.1 Connection to the webserver using GRM IP /

GiC

3.1.1 CIM 500

CIM 500 is a traditional network-connected device

and must be placed on a private network behind a

firewall. It must not be connected directly to the

Internet. Also, no TCP/IP ports must be forwarded to

the product. If you need remote access to the device,

you must use technologies such as Virtual Private

Networks (VPNs) to ensure a secured connection.

Consider contacting an IT Infrastructure Specialist to

establish such a solution.

For CIM 500 in mode 4, GRM IP (Grundfos Remote

Management), or in mode 5 (GiC), the firewall must

accept connections initialised by the Grundfos

product to the Internet only (outgoing connections).

1 2 3

TM074226

Secure connectivity for CIM 500

Pos. Description

1 Grundfos device

2 Firewall

3 Internet

For CIM 500 in mode 5, GiC (Grundfos iSolution

Cloud), the ports 443 and 8883 must be open for

outbound traffic only and require access to DNS or

port 53.

English (GB)

3.2 Connecting the Ethernet cable

Use RJ45 plugs and an Ethernet cable. Connect the

cable screen to protective earth at both ends.

It is important to connect the cable screen

to protective earth by means of the earth

clamp or in the connector.

For GRM IP communication, ensure that

the network is protected by a firewall.

Maximum cable length

Speed

[Mbit/s] Cable type Max. cable length

[m (ft)]

100/10 CAT5, CAT5e,

CAT6 100 (328)

CIM 500 is designed for flexible network installation.

The built-in two-port switch makes it possible to daisy

chain from product to product without the need of

additional Ethernet switches. The last product in the

chain is only connected to one of the Ethernet ports.

Each Ethernet port has its own MAC address, and

CIM 500 has a built-in switch which means that the

cable can run another 100 metres whenever passing

a CIM 500 module.

3 4 5

TM056435

Example of Industrial Ethernet network

Pos. Description

1 Ethernet switch

2 CIM 500

3 CIM 500

4 CIM 500

5 CIM 500

TM057480

Example of the Ethernet connection

Pos. Description

1 Industrial Ethernet RJ45 connector 1

2 Industrial Ethernet RJ45 connector 2

3 Earth clamp/GND

English (GB)

3.3 Selection of Industrial Ethernet protocol

The module has a rotary switch for selection of the

Industrial Ethernet protocol. See the figure below.

TM057481

Selecting the Industrial Ethernet protocol

Pos. Description

0 PROFINET IO, default

1 Modbus TCP

2 BACnet IP

3 EtherNet/IP

GRM IP for Grundfos Remote

Management. Requires a contract with

Grundfos.

5 Grundfos iSOLUTIONS Cloud (GiC)

6...E Reserved. LED1 is permanently red to

indicate an invalid configuration.

Resetting to factory settings.

Set the rotary switch to this position.

LED1 starts flashing red and green for 20

seconds to indicate that factory reset is

about to take place.

After 20 seconds, LED1 stops flashing and

factory reset is initiated.

When both LED1 and LED2 switch off, the

reset is completed. The rotary switch can

be moved to another position.

If the position of the rotary switch is

changed when the module is powered on,

the module restarts and uses the protocol

associated with the new position.

Related information

2. Applications

3.4 Setting the IP addresses

The module comes with a fixed webserver IP

address. Via the webserver, this address can be

changed to another fixed value, or a DHCP server

can be selected.

Default IP settings

used

by the webserver

IP address: 192.168.1.100

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

Device name and

IP settings for

PROFINET IO

The device name is configured

from the webserver or from the

PROFINET IO configuration

tool. The IP address is

automatically assigned by the

PLC. This assigned PROFINET

IP address must be different

from the webserver's IP

address.

IP settings for

Modbus TCP

It can be given a fixed value via

the webserver, or it can use a

DHCP server.

This assigned Modbus TCP

address must be different from

the webserver's IP address.

IP settings for

BACnet IP

It can be given a fixed value via

the webserver, or it can use a

DHCP server. Note that BACnet

IP and the webserver share the

same IP address.

IP settings for

EtherNet/IP

It can be given a fixed value via

the webserver, or it can use a

DHCP server.

This assigned EtherNet/IP

address must be different from

the webserver's IP address.

IP settings for GiC

GiC uses DHCP, and the

connected router automatically

assigns an IP address.

English (GB)

3.5 Connection to the webserver

The module can be configured by means of the built-

in webserver. To establish a connection from a PC to

CIM 500, proceed as follows:

1. Connect the PC and the module using an

Ethernet cable. See the figure below.

2. Configure the Ethernet port of the PC to belong to

the same subnetwork as CIM 500, for example

192.168.1.101, and the subnet mask to

255.255.255.0. See the section on network

settings in the appendix.

3. Open a standard Internet browser and type

192.168.1.100 in the URL field.

4. Log in to the webserver:

User name Default: admin

Password Default: Grundfos

The first time you log in, you must set a

unique password. Only a factory reset of

CIM 500 can reset the password to

Grundfos.

TM056436

CIM 500 connected to PC via Ethernet cable

Related information

A.1. Webserver configuration

3.5.1 Connection to the webserver using GRM IP /

GiC

To access the webserver via GRM IP / GiC, you need

to connect your PC parallel to the router (RJ45 port 1)

at CIM 500 RJ45 port 2. Look at the router webserver

which address the router assigns to CIM 500. Then

use this IP address for the webserver access.

See also the section on security in the appendix and

the section on webserver configuration.

You can use both ETH1 and ETH2 to

establish a connection to the webserver.

You can access the webserver while the

selected Industrial Ethernet protocol is

active.

When you select "GRM IP" or "GiC", the

connected router automatically assigns an

IP address to the module via DHCP.

TM074565

CIM 500 connected to PC and cellular router

Related information

A.1. Webserver configuration

3.1 Security

English (GB)

Andere Handbücher für CIM 500

Inhaltsverzeichnis

Sprachen:

Andere Grundfos Computerhardware Handbücher

Grundfos

Grundfos CIM 060 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung