Grundig VERTIGA UMS 5100 Bedienungsanleitung

HIFI STEREO MICRO SYSTEM

ENGLISH

VERTIGA

UMS 5100

72011-400.4900

CONTENTS________________________________________________________________________

3 Set-up and safety

4 Overview

Operating elements of the stereo system

The back of the stereo system

The remote control

9 Connection and preparation

12 Settings

Setting the clock

Tuning to radio stations

Storing radio stations

Deleting settings

15 General functions

17 Tuner mode

RDS station service

20 CD mode

Basic CD mode functions

Special CD mode features

Creating a track memory – playing back tracks in selected order

25 Timer mode

Setting the switch-on timer

Setting the sleep timer

27 Information

Cleaning the CD unit

Technical data, rectifying minor problems

GRUNDIG Service

ENGLISH

SET-UP AND SAFETY ______________________________________________

Please note the following information when setting up the system:

This stereo system is designed for the playback of audio signals. Any other use

is expressly prohibited.

Please note when setting up the stereo system that furniture surfaces are coated

with various types of paint and plastic, which often contain chemical additives.

These additives may cause corrosion to the feet of the unit. This may leave stains

on the surface of the furniture which can be difficult or impossible to remove.

If the stereo system is exposed to sudden changes in temperature, for example

when taken from the cold into a warm room, wait at least two hours before

using it.

The stereo system is designed for use in dry rooms. If you do use it in the open,

please ensure that it is protected from moisture, such as rain or water splashes.

Do not place the stereo system close to heating units or in direct sunlight, as this

will impair cooling.

Do not place any vessels such as vases on the stereo system. Do not insert any

foreign bodies in the CD compartment.

Do not open the stereo system under any circumstances. The manufacturer

accepts no liability for damage resulting from improper handling.

Thunderstorms are a danger to all electrical devices. Even if the stereo system is

switched off, it can be damaged by a lightning strike to the mains or the

antenna cable. Always disconnect the mains and antenna plugs during a storm.

OPTICAL

DIGITALOUT

SPEAKERS

IMPEDANCEMIN 4Ω

LINEIN (AUX)

LINEOUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜ACIN

! SERVICE !! SERVICE !

! SERVICE !

OPTICAL

DIGITALOUT

SPEAKERS

IMPEDANCEMIN 4Ω

LINEIN (AUX)

LINEOUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

°C

OVERVIEW _______________________________________________________________________

Operating elements of the stereo system

Operating controls on the front

ON/OFF Switches the stereo system to and from

stand-by mode.

OInfrared receiver for remote control sig-

nals.

•Stand-by indicator.

PHONES Headphone jack for connecting a stereo

headphone set with a jack plug

(ø 3.5 mm). The loudspeakers of the ste-

reo system are automatically switched

off.

– VOLUME + Adjusts the volume.

Operating controls on the top of the

system

TIMER/

SNOOZE

For setting the switch-on timer

Delays the alarm for approximately

5 minutes.

CLOCK For setting the clock.

SLEEP For setting the sleep timer.

X-BASS

For boosting the bass.

DSC Selects the sound settings.

ENGLISH

OVERVIEW__________________________________________________________________________________

AUX operation

AUX Selects the input source »AUX« (external

device).

Radio mode

TUNER Selects the »TUNER« input source.

BAND Selects the frequency band »FM« or

»MW«.

ıı s6 Hold down to start the station search.

5a ľľ Press briefly to change the frequency in

small steps.

NEXT PRESET Selects preset stations.

CD mode

CD/ ıII Selects the »CD« input source.

Starts and interrupts CD playback.

■Ends CD playback.

Deletes the track memory for the CD.

ıı s6 Press briefly to select the next track.

Hold down to look for a particular pas-

sage.

5a ľľ Press briefly to select the previous track.

Hold down to look for a particular pas-

sage.

əOpens and closes the CD compartment.

OVERVIEW__________________________________________________________________________________

The back of the stereo system

ANTENNA FM Socket for the rooftop antenna

EXT or the wire antenna supplied.

ANTENNA AM Antenna terminals for the wire antenna

EXT supplied.

OPTICAL Digital output for copying a CD onto a

DIGITAL OUT digital recording device.

LINE IN (AUX) Audio signal input for an external devi-

ce.

LINE OUT Audio signal output for an external devi-

ce.

SPEAKERS

Connections for the loudspeakers

RL + RL–

supplied.

= right channel,

= left channel.

~ AC IN Socket for power cord.

The only way to separate the stereo

system from the mains is to pull out the

mains plug.

General instructions for laser devices

The laser installed in the device conforms to LASER CLASS 1 and is designed to

ensure that the maximum permissible emission value cannot be exceeded under

any circumstances.

Caution:

If operating devices or methods other than those specified here are

employed, it may lead to dangerous exposure to emissions. Invisible laser

radiation is emitted if the CD compartment is opened or the safety locking

mechanism is shorted. Do not expose yourself to this radiation.

OPTICAL

DIGITAL OUT

SPEAKERS

IMPEDANCE MIN 4Ω

LINE IN (AUX)

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

ENGLISH

OVERVIEW__________________________________________________________________________________

The remote control

9Switches the stereo system to and from stand-by mode.

TIMER

SNOOZE

For setting the switch-on and sleep timers.

CLOCK For setting the clock.

1...0, +10

Numeric keys for various inputs.

To select preset stations 10 to 20, first press »+10«, then

enter the two digit station number using »0...9«.

SLEEP For setting the sleep timer.

PROGRAM In tuner mode – stores preset stations and starts the

AUTO PRESET automatic search programming.

In CD mode – stores a track memory.

REPEAT In tuner mode – switches stereo broadcasts from stereo

STEREO/MONO to mono reception.

In CD mode – repeats a track or the entire CD.

RANDOM In CD mode – activates the playback of tracks in random

order.

CT In tuner mode – selects the RDS time.

RDS In tuner mode – selects the RDS mode.

DISPLAY In tuner mode – calls up various information on the display.

TIMER

SNOOZE

CLOCK

123

456

789

10+SLEEP

REPEAT

STEREO/MONO RANDOM

PROGRAM

AUTO PRESET

DSC X-BASS

VOLUME

AUX BAND

TUNER

DISPLAY

CT RDS

MUTE

OVERVIEW__________________________________________________________________________________

DSC Selects the sound settings.

MUTE Switches the loudspeaker on and off again.

X-BASS For boosting the bass.

AUX Selects the input source »AUX«.

CD ıII In CD mode – starts CD playback, pauses playback.

BAND TUNER Selects the input source »TUNER« and selects the frequency

bands »FM« or »MW«.

5a ľľ In tuner mode – press briefly to change the frequency

ıı s6 in small steps. Hold down to start the station search.

In CD mode – press briefly to select a track.

Hold down to search for a particular passage.

■In CD mode – ends playback of the CD.

+ VOLUME –

Adjusts the volume.

TIMER

SNOOZE

CLOCK

123

456

789

10+SLEEP

REPEAT

STEREO/MONO RANDOM

PROGRAM

AUTO PRESET

DSC X-BASS

VOLUME

AUX BAND

TUNER

DISPLAY

CT RDS

MUTE

ENGLISH

CONNECTION AND PREPARATION_______

Connecting the antenna

1Insert the rooftop antenna in the »ANTENNA FM EXT« socket on the

stereo system.

Note:

If no rooftop antenna system is available, use the auxiliary antenna supplied.

This antenna provides reasonably good reception of local FM (VHF) stations.

Do not shorten the auxiliary antenna.

2Insert the wire antenna into the »ANTENNA AM EXT« terminals on the

stereo system. Adjust the position of the wire antenna until reception is at its

best.

Connecting the loudspeakers

1Connect the loudspeaker cables to the »SPEAKERS RL + RL –« terminals

on the stereo system and the »+ INPUT –« terminals on the loudspeakers.

Connect the cables labelled in red to »+«.

Connecting an external device

1Connect the audio output sockets of the external device (for example a

television or DVD player) to the »LINE IN (AUX)« sockets on the stereo

system using a cinch cable.

Note:

Switch the stereo system off before you connect external devices. Make sure

the stereo channels are properly connected:

R = right channel (red), L = left channel (white).

OPTICAL

DIGITAL OUT

SPEAKERS

IMPEDANCE MIN 4Ω

LINE IN (AUX)

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

TVR

SPEAKERS

IMPEDANCEMIN 4Ω

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

CONNECTION AND PREPARATION_______________________________________

Connecting a digital recording device

1Use an OPTICAL cable to connect the »DIGITAL OPTICAL OUT« jack on

the stereo system to the appropriate jack on the external device (e.g. MD or

CDR).

Note:

This socket enables you to record CD playback with a digital recording

device.

Connecting headphones

1Insert the headphone plug (ø 3.5 mm) into the »PHONES« socket on the

front of the stereo system.

– The loudspeakers of the stereo system are switched off.

Connecting the power cord

Note:

Check that the mains voltage on the type plate (on the back of the device)

corresponds to your local mains supply.

The only way to disconnect the device from the mains supply is to pull out the

plug.

1Plug the mains cable supplied into the »~AC IN« socket on the device.

2Insert the mains cable plug into the mains socket.

PHONES

ME +

OPTICAL

DIGITAL OUT

SPEAKERS

IMPEDANCE MIN 4Ω

LINE IN (AUX)

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

OPTICAL

DIGITAL OUT

SPEAKERS

IMPEDANCE MIN 4Ω

LINE IN (AUX)

LINE OUT

ANTENNA

COA-

XIAL

75Ω

LOOP

EXT

˜AC IN

Andere Handbücher für VERTIGA UMS 5100

Inhaltsverzeichnis

Andere Grundig Stereoanlage Handbücher

Grundig

Grundig V 23 Bedienungsanleitung

Grundig

Grundig Ovation 2i CDS 9000 WEB Bedienungsanleitung

Grundig

Grundig ovation cds 6580 spcd Bedienungsanleitung

Grundig

Grundig M 2050 BT DAB+ Bedienungsanleitung

Grundig

Grundig RR 630 CD Bedienungsanleitung

Grundig

Grundig K-RCD 120 Bedienungsanleitung

Grundig

Grundig FREAXX 40 RRCD 4204 PLL Bedienungsanleitung

Grundig

Grundig PA 6-I Bedienungsanleitung

Grundig

Grundig RR 3200 CD Bedienungsanleitung

Grundig

Grundig CDM 700 Bedienungsanleitung

Grundig

Grundig M 1100 Bedienungsanleitung

Grundig

Grundig UMS 5800 DEC Bedienungsanleitung

Grundig

Grundig CDP-S 150 Bedienungsanleitung

Grundig

Grundig M 48-DC Bedienungsanleitung

Grundig

Grundig MS 235 Bedienungsanleitung

Grundig

Grundig CMS 4000 BT DAB+ Bedienungsanleitung

Grundig

Grundig UMS 15 Bedienungsanleitung

Grundig

Grundig MS 530 DAB+ Bedienungsanleitung

Grundig

Grundig M 27-C Bedienungsanleitung

Grundig

Grundig VERTIGA UMS 5101 CDC Bedienungsanleitung

Grundig

Grundig KM 13 Bedienungsanleitung

Grundig

Grundig CIRFLEXX UMS 4100 Bedienungsanleitung

Grundig

Grundig MS 510 Bedienungsanleitung

Grundig

Grundig CMS 2000 BT Bedienungsanleitung

Beliebte Stereoanlage Handbücher anderer Marken

LG CM3330B Bedienungsanleitung

Sony

Sony SS-CEP50 Bedienungsanleitung

Cetacea Sound

Cetacea Sound CVS-II Bedienungsanleitung

Aiwa

Aiwa XR-H66MD Bedienungsanleitung

Denon

Denon UCD-250 Bedienungsanleitung

Sanyo

Sanyo DC-MX41i Bedienungsanleitung

Sharp

Sharp CD-ES600V Bedienungsanleitung

Exibel

Exibel BDX600-UK Bedienungsanleitung

Sanyo

Sanyo DC-F320 Bedienungsanleitung

Philips

Philips FWM583X Bedienungsanleitung

Sharp

Sharp CD-C462 Bedienungsanleitung

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Bedienungsanleitung

Aiwa

Aiwa XR-EM70 Bedienungsanleitung

Cyrus

Cyrus Lyric Bedienungsanleitung

Philips

Philips MCM159/98 Bedienungsanleitung

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Bedienungsanleitung

RCA

RCA RS3965SB Bedienungsanleitung

Sharp

Sharp XL-UH240 Bedienungsanleitung