Naming Inputs
You can assign a specific name
to each input, either a pre-pro-
grammed standard name or a
custom name of your choice of
up to 8 characters. When NAME
INPUT appears in the display,
press Monitor. SELECT INPUT:
1 will appear in the display. To
choose a different input for nam-
ing, press an Input button to
move up or down through the
five inputs. When the number of
the input which you wish to
name is displayed, press
Monitor. CUSTOM will blink in
the display. If you wish to create
a custom name for the input,
press Monitor and skip to section
1.a. below. If you wish to select a
name from the standard list,
press an Input button so that
STANDARD blinks, then press
Monitor and skip to section 1.b.
below. Please note: If a name
has previously been assigned to
the input, that name will be delet-
ed if you press Monitor while
STANDARD is blinking.
1.a. If you have chosen custom
naming, CUSTOM will appear in
the first line of the display. The
selected input number will
appear in the second line, fol-
lowed by a colon (:) and a cursor
marking the first position in the
8-character name which you can
create. If a custom name has
already been assigned to this
input, it will be displayed. To
select a character (letter, num-
ber, symbol, empty space or
punctuation mark) for the first
position, continuously press one
of the Volume buttons until the
desired character is displayed.
Press Input Up to move to the
next position, then use the
Volume buttons to select the
desired character. Repeat for
each character in the name. If
you make a mistake or change
your mind, use the Input Down
button to move back and change
a previously selected character.
When the name is complete,
press Monitor. The name is now
stored in memory and will be dis-
played each time you select that
input. NAME INPUT will appear
in the display. You can go back
to step 1 above to name another
input or press Menu to select the
next menu-controlled function.
1.b. If you have chosen standard
naming, SELECT STANDARD
NAME will appear in the first line
of the display. The selected input
number and the first name in the
standard list (CD) will appear in
the second line. To select the
name which you wish to assign
to the input, press the volume
buttons to move up or down
through the standard name list in
the following order:
10
