GS CI-7100 Bedienungsanleitung

Contents

Warning & Safety..........................................................................................................................4

Front Panel And Rear Panel Of The Set-Top Box........................................................................5

STB Connections...........................................................................................................................6

Satellite services only............................................................................................................. 6

Satellite services with Hi-Fi system.........................................................................................6

TV with terrestrial & satellite services................................................................................... 6

Other Equipment Connection.......................................................................................................7

Satellite antenna with DiSEqC 1.0......................................................................................... 7

Satellite antenna with DiSEqC 1.2......................................................................................... 7

Remote Control Unit.....................................................................................................................8

Guide to Functions ..................................................................................................................10

Information banner............................................................................................................... 10

Teletext.................................................................................................................................10

Subtitles .............................................................................................................................. 11

Changing services.................................................................................................................11

Volume Control.................................................................................................................... 11

Soundtrack............................................................................................................................11

Service List........................................................................................................................... 12

Favorite list...........................................................................................................................12

Information Call/Help............................................................................................................12

Current Time.........................................................................................................................12

Main Menu Guide........................................................................................................................13

Full-screen menu.................................................................................................................. 13

On-screen display menu.......................................................................................................13

Keyboard...............................................................................................................................14

Installation..................................................................................................................................15

Antenna Setup......................................................................................................................15

Satellite Setup.......................................................................................................................17

Language Setup....................................................................................................................18

A/V Output Setup.................................................................................................................18

Other Settings.......................................................................................................................19

PID Editing............................................................................................................................19

Service Searching....................................................................................................................... 20

Automatic Search..................................................................................................................20

Manual Search...................................................................................................................... 21

Service Organizing......................................................................................................................22

Service Editing......................................................................................................................23

Network Organizing...............................................................................................................23

Data Tranfer................................................................................................................................24

Conditional Access / Default settings.......................................................................................26

TV Guide.....................................................................................................................................27

Parental Control (PIN).................................................................................................................28

Timer Setup................................................................................................................................29

Games.........................................................................................................................................30

Set-Top Box Status / Troubleshooting Guide............................................................................31

Specification................................................................................................................................32

This STB has been manufactured to satisfy international safety standards. We recommend you to

address to the qualified service personnel for installation of the set-top box and satellite system.

However if you have decided to install the system by yourself, please, learn the manual properly.

Please read the following safety precautions carefully.

MAIN SUPPLY: 190 - 250V AC 50/60Hz. Make sure your main supply satisfies the standard.

OVERLOADING: Do not overload a wall outlet, extension cord or adapter as this may result in fire

or electric shock.

LIQUIDS: Keep liquids away from the STB, do not expose the STB to rain or moisture.

FOREIGN INTERFERENCE:

Coins, insects and other small stuff may get into slots and damage the STB or may result in fire.

CLEANING: Disconnect the STB from the wall outlet before cleaning.

Use a light damp cloth (no solvents) to dust the STB.

VENTILATION: The slots on the top of the STB must be left uncovered to allow proper airflow to

the unit.

Do not stand the STB on soft furniture or carpets.

Do not expose the STB to direct sunlight or place it near a heater.

Do not stack other electronic equipment on the top of the STB.

ATTACHMENTS: Do not use any attachments that are not recommended for use with the STB as these

attachments may cause a hazard or may damage the STB.

CONNECTION TO THE SATELLITE DISH LNB:

Disconnect the STB from the mains supply before connecting or disconnecting the cable from the

satellite dish. Failure to do so can damage the lnb .

CONNECTION TO THE TV:

Disconnect the STB from the mains before connecting or disconnecting the cable from the TV set or

video-recorder. FAILURE TO DO SO CAN DAMAGE THE TV/VR/STB.

GROUNDING: the LNB must be grounded by the system for the satellite dish. The system must

comply with SABS 061.

LOCATION : Place the STB indoors (on hard surface) in order to prevent exposure to lightning, rain

or sunlight.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE

NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning :

Please do not insert metal or any other alien substance into the slots for the Modules and Smart

Cards.

Doing so can cause damage to the STB and reduce its life span.

WARNING & SAFETY

1.BUTTONS “CH“

Press to adjust services down and up.

2.BUTTONS “VOL“

Press to increase or decrease the volume.

3.STANDBY LED(RED)

Indicates that the STB is in standby mode.

OPERATING LED(GREEN)

Indicates that the STB is operating

4.Four-valued indicator

5.BUTTON MENU

Press to display the Main Menu on the screen or return to the screen from a sub menu

screen.

6.BUTTON ESC

Press to return to the previous menu and screen.

7.BUTTON OK

This button is used to select the item on the menus.

8.BUTTON POWER

Switches on and switches off the STB. Moves STB from Standby to Operating mode and back.

1.LNB IN

Use to connect an antenna.

2.LNB OUT

Use when connecting to another STB.

3.RS-232C

Use when connecting to your PC.

4.TV SCART

For the audio/video input on the TV.

5.VCR SCART

For the VCR.

6.AUDIO/VIDEO OUTPUT

Audio/video signal for HI-FI system and TV.

7.DIGITAL AUDIO

Output for connection to a digital amplifier.

8.RF OUTPUT

Use to connect a RF signal from your STB to RF(ANT) input jack on your TV.

9.RF INPUT

Use to connect a general Aerial Antenna and CABLE jacks to a RF input jack on the STB.

10.S-VIDEO

Output for connection with TV.

FRONT PANEL AND REAR PANEL OF THE SET-TOP BOX

76543

10 9

There are several ways of connecting the STB to your existing Audio/TV system.

We recommend using one of the following set-ups for best results:

1.Connect one end of the 21-pin SCART cable

to the TV SCART connector on the STB and

the other end to the SCART socket on your

TV. You can also connect TV to the STB by the

SVHS cable.

2.If you do not have an SVHS and a SCART con-

nector on your TV you can connect the STB to

RF IN connector on your TV by the RF cable.

3.Connect the coaxial cable from the LNB to

the LNB IN socket on the STB.

1.1, Connect an AUDIO L,R sockets on the back

of the STB to the input socket on your Hi-Fi sys-

tem. Also you can connect Digital Audio socket

to the input socket on your Hi-Fi system.

2.Connect S-VIDEO socket on the STB to the

input socket on your TV.

3.Connect the coaxial cable from the LNB to

the LNB IN socket on the STB.

1.Connect one end of the RF lead to the RF

OUT connector on the STB and the other end

to the RF IN connector on your TV.

2.Connect one end of the RF lead to the RF IN

connector on the STB and the other end to the

connector on your TV antenna.

3.Connect the coaxial cable from the LNB to

the LNB IN socket on the STB.

SATELLITE SERVICES ONLY

SATELLITE SERVICES WITH HI-FI SYSTEM

TV WITH TERRESTRIAL & SATELLITE SERVICES

STB CONNECTIONS

DiSEqC — provides STB interaction with other equipment. To transmit commands it uses particu-

lar 22 kHz signal and interval combinations.

The STB supports DiSEqC 1.0 and DiSEqC 1.2

SATELLITE ANTENNA WITH DISEQC 1.0

You can connect a single satellite antenna directly to the set-top box. DiSEqC 1.0 allows multiple

antennas to be connected to the STB simultaneously. If you have two or more fixed antennas or

LNBs, you can use a DiSEqC 1.0 switch.

1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the

DiSEqC switch.

2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of

the DiSEqC switch.

3. Do the same for other LNBs.

4. Connect one end of a coaxial cable to the RF OUT connector of the DiSEqC switch and the

other end to the LNB IN socket on the STB.

SATELLITE ANTENNA WITH DISEQC 1.2

DiSEqC 1.2 - controls the motorized system.

1. Connect the coaxial cable from the LNB of your motorized system to the LNB IN socket on the

STB and the other to the “REC” or “STB” connector on the DiSEqC 1.2 motor.

2. Connect the coaxial cable from the LNB to the LNB IN connector on the DiSEqC 1.2 motor.

Please, note: the motorized system can have different configurations. For more details, please,

refer to its manual.

OTHER EQUIPMENT CONNECTION

1 ~ NUMERIC BUTTONS

Press to select a service and enter any digital

information.

2 INFORMATION

Displays the information banner on the screen.

Press this button while watching a service and

the following information will be displayed on

the screen: current time, the name and the

number of the service, the quantity of sound-

tracks, the quality of the signal.

Press the button again to get the broadened

information banner, containing the following

information: satellite, transponder, rate and

etc. of the service, the description of the pro-

gram. To close the information banner press

the button once more.

3 SOUNDTRACK

Press to display the soundtrack list for the

current service. Press this button to get the

soundtrack mode and the list of available au-

dio services.

4 TELETEXT /SUBTITLE

Press to display teletext**.

Press to display/to close the subtitle language

list for the current service.

5 UHF

Press to set favorite service list Menu.

6 TIME

Press to display the current time in the top left

corner of the screen.

7 EXIT

Press to return to the previous menu and

screen or to leave Main Menu. Pressing the

button during Service searching stops the

process.

8 / VOLUME UP/DOWN BUTTONS.

Press to increase (V+) or decrease (V-) the

volume.

9 STANDBY

Press to switch between Operation and Stand-

by modes.

Attention! In Standby mode some STB joints

are under the voltage.

** Press to leave the mode.

REMOTE CONTROL UNIT

UHF

EXIT

V+ V-

EXIT

1 2 3

4 5 6

7 8 9

EXIT

TV/SAT

UHF

NUMERIC BUTTONS

STANDBY

TV / SAT

TV /

RADIO

MUTE

CURSOR

P+ /

P-

HELP

EPG

RCL (Recall)

INFORMATION (RED)

SOUNDTRACK

(GREEN)

SUBTITLE

(YELLOW)

UHF (BLUE)

TIME

(WHITE)

EXIT

V+ / V-

V+

V-

P+?

P-

RCL

EPG

10 TV/SAT (switch through SKART)

Press to switch between «Terrestrial/Satellite

TV modes.

11 TV/RADIO

Press to switch between Satellite TV and Radio

modes.

12 MUTE

Press to temporarily cut off the sound.

13 MENU **

Press to display the Main Menu on the screen

or return to the current service.

14 CURSORS

Press to move the highlighted bar in the serv-

ice list, to select options on the menus, to

switch between services or increase and de-

crease the audio volume, to change the menu,

to select the soundtrack mode etc.

TV/SAT

/ /

15 OK

Press to display the service list**.This button is used to select and verify the chosen item in the

menus.

16 / Programme up/down buttons.

Press to select the next (P+) or previous (P-) service. Press to move up or down pages in the

service list.

17 HELP *

Press to display the help box on the screen any time during the work with STB. Additional and

clarifying information.

18 EPG **

Electronic Programme Guide button displays the TV/Radio programme guide.

19 RCL (Recall)

Press to select the service that was previously viewed.

Service choice inversion in the menu «Organizing Services»

Please note: The design of the Remote Control Unit may be changed without advance notice.

REMOTE CONTROL UNIT

P+

P-

EPG

RCL

** Press to leave the mode

EXIT

* This button may not be equipped in some SW versions

The details of service and event are automati-

cally displayed on the I-Plate in the bottom of

the screen when pressing the button or

changing services.

In the bottom information box the following infor-

mation is displayed:

– Current time

– Service name

– Service number

– Favourite group name

– Subtitle symbol, teletext symbol, digital sound

(AC3) symbol, scrambling service symbol , radio

symbol , lock symbol

– Signal quality bar.

– The number of the current soundtracks, the

quantity of soundtracks

– The name of the program*

– Time of the beginning/end of the program

After the second press on the red button the broadened information box, containing the

following information, is displayed in the center of the screen:

– Satellite Name

– Network Name

– Frequency, Polarization, FEC, Symbol Rate (SR)

– Video/Audio/PCR PID of the Service

– Program Genre

– Age Limit

– Current Date

– Program Description

– Signal Strength Scale

INFORMATION BANNER

TELETEXT

The STB has the integrated teletext decoder.

To activate it press the yellow button

, select “teletext” in the list and

press . In this list select the language

for teletext. You can operate the teletext using

colour and digital buttons of the RCU.

The STB supports teletext in VBI-mode(Vertical

Blanking Interval). Receiving teletext in this

mode is possible if your TV has a teletext

decoder. You can switch to teletext mode

through your TV’s RCU.

Please, note: this function is available if op-

erator provides the teletext service

GUIDE TO FUNCTIONS

* See TV Guide

SUBTITLES

Press the yellow button to display subtitles

on the screen, select ‘Subtitles’ and press . In the

appeared list select a desirable language for subtitles

and press . From the moment image will be accom-

panied by subtitles.

To cancel subtitles press the yellow button ,

select ‘Subtitles’ and press . In the appeared list

select Exit.

In Subtitles mode Time is not displayed on the

screen.

Please, note: this function is available if operator

provides the subtitle service.

You can change services in several ways:

Press the Numeric buttons ~ ) on the remote control unit.

Press the buttons or / .

To switch between TV and Radio services, press the TV/Radio ( ) button.

To select the previously viewed service, press the Recall ( ) button.

CHANGING SERVICES

VOLUME CONTROL

To adjust the volume level, use / or

buttons. buttons work either in the screen

menu mode or service viewing mode. In the OSD

menu mode you cannot use buttons.

To temporarily mute the volume, press the Mute

button.

To cancel mute, press the Mute button again

or press the buttons / or .

SOUNDTRACK

If you want to change the audio language of the current

service, press the Green button.

The on-screen menu will be displayed on the top left side

of the screen.

Use buttons to select the soundtrack.

Use buttons to select left, right, mono or stereo

output audio mode.

Press or buttons again to cancel the

menu.

You can change output audio mode from the menu: “Instal-

lation” – “System Settings” – “AV Output Setup” - “Audio

Output” - select left, right, mono or stereo output audio

mode.

GUIDE TO FUNCTIONS

P+

P-

V+ V-

EXIT

V+ V-

RCL

Please, note: this function is available if operator provides the service.

To display the current service list on the

screen use the button. You can look

through the list in the common or broadened

modes. To change the current mode press

the button. The top field contains the

name of the current list, the bottom field

contains the full name of the chosen service.

Use the / buttons to

select a service.

Use buttons to move the cursor to

the next/previous service in the list. In the

broaden mode you can use buttons

to move up or down columns in the list and

use / buttons to move up or down pages in the list. The scroll bar on the right of the

screen demonstrates the location of the chosen service in the general list. Press button to

view the chosen service.

FAVORITE LIST

Default quantity of Favourite lists is 4. Organ-

ize Favourites you can in the menu: “The

Main Menu” – “Organazing Services”.

To display the list of Favourits on the screen

press the blue button on the Remote

Control in the view mode.

Use buttons to move in the list. To

open the list press . Press button to

view the chosen service.

If you press while you are in the list the

latest service in the list or the first service in

the list will be switched on.

INFORMATION CALL /HELP*

To get information about the STB work press . Information is available in the menu mode

CURRENT TIME

To call the Clock in the viewing mode press the white button on the Remote Control.

To cancel the Clock press button again.

Also you can press the red button on the Remote control to get current time from the

information box.

* This function may not be equipped in some SW versions

GUIDE TO FUNCTIONS

UHF

SERVICE LIST

P+

P-

P+

P-

All TV and All Radio lists are obligatory and created after Search. If you delete any of them you

will lose the whole Favourite lists content.

Please, note: maximum quantity of Favorites is 30.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere GS Set-Top-Box Handbücher

GS HD 9300 Bedienungsanleitung

Beliebte Set-Top-Box Handbücher anderer Marken

VBrick

VBrick 8000-0188 Bedienungsanleitung

Kogan

Kogan KGNPVR500VAA Bedienungsanleitung

Asus

Asus O!PLAY MEDIA PRO Bedienungsanleitung

Samsung

Samsung ICU 100 Bedienungsanleitung

VECTORMAX

VECTORMAX A12E Bedienungsanleitung

DStv

DStv Explora Bedienungsanleitung

Ace Digital TV

Ace Digital TV ADB 3800 Bedienungsanleitung

Cisco

Cisco 4398DVB Bedienungsanleitung

Polaroid

Polaroid KHA-01651B Bedienungsanleitung

Samsung

Samsung GX-SM530CF Bedienungsanleitung

BT Business Total Broadband Bedienungsanleitung

Megasat

Megasat HD 720 plus Bedienungsanleitung

Sungale

Sungale STB608 Bedienungsanleitung

Amino

Amino Amigo 7X Bedienungsanleitung

Geniatech

Geniatech ATV225 Bedienungsanleitung

Android

Android Androidminibox mx2 se Bedienungsanleitung

Hama

Hama Internet TV Box Bedienungsanleitung

Ariva

Ariva T650i Bedienungsanleitung