Gtech CTL001 Bedienungsanleitung

OPERATING MANUAL

Model number: CTL001

Task Light

4617_Flip_Light_manual_aw.indd 14617_Flip_Light_manual_aw.indd 1 28/10/2020 16:4428/10/2020 16:44

IMPORTANT SAFEGUARDS:

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE.

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

WARNING: Basic safety precautions should always be observed when

using an electrical appliance to reduce the risk of ﬁre, electrical shock

or serious injury.

Personal Safety:

• Do not look directly at the light source

or direct the light at your eyes.

• The product should not be positioned

whereby it can be stared into for a

prolonged period at a distance of less

than 2.9m.

• Never operate the product if it is

damaged.

• Keep the product and all accessories

away from hot surfaces.

• Never modify the product in any way.

Electrical safety:

• Only use batteries and chargers

supplied by Gtech.

• Never modify the charger in any way.

• The charger has been designed for a

speciﬁc voltage. Always check that the

mains voltage is the same as that stated

on the rating plate.

• A charger that is suitable for one type

of battery pack may create a risk of ﬁre

when used with another battery pack;

never use the charger with another

appliance or attempt to charge this

product with another charger.

• A damaged or entangled charger cord

increases the risk of ﬁre and electric

shock.

• Do not abuse the charger cord.

• Never carry the charger by the cord.

• Do not pull the cord to disconnect from

a socket; grasp the plug and pull to

disconnect.

• Don’t wrap the cord around the charger

to store.

• Keep the charger cord away from hot

surfaces and sharp edges.

• The supply cord cannot be replaced. If

the cord is damaged the charger should

be discarded and replaced.

• Avoid body contact with earthed or

grounded surfaces, such as pipes. There

is an increased risk of electric shock if

your body is earthed or grounded.

• Do not handle the charger or product

with wet hands.

• Do not let children use or charge the

product.

• Ensure users have an understanding of

how to use, maintain and charge the

product.

• Do not charge the battery pack outside.

• Before charging check the power

supply and charger cables for signs of

damage or ageing.

Battery safety:

• Liquid ejected from the battery may

cause irritation or burns.

• In an emergency situation contact

professional help immediately.

• Do not touch any liquid that leaks from

the battery.

• Wear gloves to handle the battery and

dispose of immediately in accordance

with local regulations.

• Shorting the battery terminals may cause

burns or ﬁre.

• When the battery pack is not in use,

keep it away from paper clips, coins,

keys, nails, screws or other small metal

objects that could make a connection

from one terminal to another.

• When you dispose of the appliance

4617_Flip_Light_manual_aw.indd 24617_Flip_Light_manual_aw.indd 2 28/10/2020 16:4428/10/2020 16:44

remove the battery and dispose of the

battery safely in accordance with local

regulations.

• Batteries must be recycled or disposed

of properly. Do not dispose of batteries

with regular waste, municipal waste

stream or burn, as batteries may leak or

explode. Do not open, short circuit or

mutilate batteries as injury may occur.

• Do not use the appliance if any part is

damaged or defective.

• Do not attempt to use the charger with

any other product or to charge this

product with any other charger.

• This product uses Li-Ion batteries. Do

not incinerate batteries or expose

to high temperatures, as they may

explode.

• Do not charge the battery when the

surrounding air temperature or the

battery pack is below 0°C or above

45°C.

• Aer prolonged use or in high

temperatures the battery may become

warm. Allow the product to cool for 30

minutes before charging.

• Use only with recommended Gtech

battery.

• Leaks from battery cells can occur under

extreme conditions. If the liquid gets on

your skin wash immediately with soap

and water. If the liquid gets into your

eyes, ﬂush them immediately with cold

water for a minimum of 10 minutes and

seek urgent medical attention.

• Do not store the battery outside for

prolonged periods of time, especially

over the winter months.

Maintenance and storage

• Use only the manufacturer’s

recommended replacement parts and

accessories.

• When not in use, store out of the reach

of children.

• The LEDs of the product are not

replaceable; when they reach the end

of life the product must be replaced.

Intended Use:

•This product is intended for

DOMESTIC USE ONLY.

WARNING:

• Do not use solvents, or polishes to

clean the outside of the appliance;

wipe clean with a dry cloth.

4617_Flip_Light_manual_aw.indd 34617_Flip_Light_manual_aw.indd 3 28/10/2020 16:4428/10/2020 16:44

Thank you for choosing Gtech

“Welcome to the Gtech family. I started Gtech to create sensible, easy

to use products that do a great job, and hope you get many years of

trouble-free performance from your new product.”

Nick Grey – Inventor, owner of Gtech

Battery (sold separately)

Lens/Adjuster

Power switch

Hanging hook

About your product

Make a note of your product serial number code for future reference. You can ﬁnd this on

the underside of the product once the battery has been removed.

_ - _ _ - _ _ _ ~

_ _ _ _ _ ~

_ _ _ _ ~

_ _ ~ _ _ _ _ _ _ _

X-XX-XXX~

XXXXX~

WWYY~

00~0000000

4617_Flip_Light_manual_aw.indd 44617_Flip_Light_manual_aw.indd 4 28/10/2020 16:4428/10/2020 16:44

To install, simply insert the battery pack.

To remove, depress the latch...

Make sure the latch on the battery snaps

in place and battery pack is secured to the

tool.

...and pull out the battery pack.

Installing and removing the battery

4617_Flip_Light_manual_aw.indd 54617_Flip_Light_manual_aw.indd 5 28/10/2020 16:4428/10/2020 16:44

Full the lamp fully forward to find the

hanging hook

This can be ﬂipped out.

The light can be positioned through 180º

Adjusting the position of the light

4617_Flip_Light_manual_aw.indd 64617_Flip_Light_manual_aw.indd 6 28/10/2020 16:4428/10/2020 16:44

To switch on press the green button. Press a

second time for full brightness and third time

to switch oﬀ.

There is an adjuster on the lens to turn the

beam from wide to narrow.

Once the hook has been deployed the light

can be angled accordingly.

The lamp can also be sat upright

Operation

WARNING:

Do not shine the light directly into your own or anyone else’s eyes.

4617_Flip_Light_manual_aw.indd 74617_Flip_Light_manual_aw.indd 7 28/10/2020 16:4428/10/2020 16:44

To charge the battery, line up the slot of the

battery with the slot of the charger and slide

into place. The charger is sold separately.

The battery indicator light should turn from

green to red when the battery is charging.

When the indicator light has turned green the

battery should be fully charged.

Charging the battery

WARNING:

Allow battery to cool down before

charging if the battery is hot aer

continuous use.

BATTERY

All batteries wear out over time due to normal

wear and tear. Do not attempt to disassemble

and repair the battery, as this could cause

serious burns especially when wearing rings

and jewellery. For the longest possible battery

life, we suggest the following:

• Remove the battery from the charger once

fully charged.

• Store the battery away from moisture and at

a temperature below 80°F.

• Store the battery with at least a 30% - 50%

charge.

• If a battery has been stored for six months or

more, charge the battery as normal.

The state of charge of the battery can be

tested by pressing the button. Three bars

indicates a full charge, two bars a partial

charge, one bar low charge.

4617_Flip_Light_manual_aw.indd 84617_Flip_Light_manual_aw.indd 8 28/10/2020 16:4428/10/2020 16:44

Maintenance

Your product requires very little care and maintenance. Simply clean the lens

regularly with a non-abrasive cleaner, we recommend the work light to be completely

discharged every one month and fully recharged again .Only store with a fully

charged battery and top-up the charge from time to time if stored for a long time (we

recommend the work light to be completely discharged every three month and fully

recharged again). Store in a dry and frost-free place, the ambient temperature should

not exceed 40°C.

Safety warning for work-Light

This is not a toy; children should not permit to use it. This is a DIY product, all

electronic parts ﬁxed already, any intention of opening work-light or changing work-

light design is prohibitive unless a professional electrician.

Do not attempt to replace or change or the diode lights! If the protective glass is

cracked or broken, it must be replaced before the work light can be used again.

Troubleshooting

The product isn’t working The battery may have cut out due to

excessive use to prevent overheating. Allow

the product to cool down before re-using.

The product is getting hot During intensive use, this is normal, but it

is advisable to allow the product to cool

down regularly to prevent damage of the

motor.

The battery heats up during use This is normal. Allow the battery to cool

down regularly to prevent damage of the

battery.

The battery and charger heat up

during charging

This is normal. It is advisable to remove

the battery from the charger once it is fully

charged.

4617_Flip_Light_manual_aw.indd 94617_Flip_Light_manual_aw.indd 9 28/10/2020 16:4428/10/2020 16:44

TECHNICAL SPECIFICATION

Voltage DC 20V Max

Work Time: Max 12 hrs

Output power 4 Watts

Brightness 300 Lumens High

150 Lumens Low

support@gtech.co.ukLive chat supportOnline How to Videos

Product support

If these initial tips do not solve your problem we please visit our support area where you can ﬁnd

troubleshooting help including online manuals, FAQs and how-to-videos, as well as genuine

spares and replacement parts compatible with your product.

Visit: www.gtech.co.uk/support

Visit www.gtech.co.uk/warrantyregistration to register your product to ensure that we have all

the information required to provide you with quick and eﬃcient support.

You will need your product’s serial code.

WARRANTY – REGISTRATION

X-XX-XXX~

XXXXX~

WWYY~

00~0000000

If you purchased directly from Gtech, your

details are already registered and your 2-year

warranty will start automatically.

If you purchased from an authorised Gtech

retailer, please register your warranty within

3 months. You will need to provide proof of

purchase to support any claim(s) against your

warranty.

4617_Flip_Light_manual_aw.indd 104617_Flip_Light_manual_aw.indd 10 28/10/2020 16:4428/10/2020 16:44

Inhaltsverzeichnis

Andere Gtech Beleuchtungsausrüstung Handbücher

Gtech

Gtech CFL001 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung