Guardian LUX-V Series Bedienungsanleitung

INSTALLATION & OPERATION MANUAL

INVERTER POOL & SPA HEAT PUMP

LUX-V SERIES

Page 1

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

TABLE OF CONTENTS

1. FOREWARD ...........................................................................................................................................................................................................3

1.1 WARNINGS .................................................................................................................................................................................................3

2. SPECIFICATIONS.................................................................................................................................................................................................4

2.1 PERFORMANCE DATA ..........................................................................................................................................................................4

2.2 DIMENSIONS..............................................................................................................................................................................................5

3. INSTALL & CONNECTION ...............................................................................................................................................................................6

3.1 INSTALLATION DIAGRAM ...................................................................................................................................................................6

3.2 LOCATION OF INSTALLATION ..........................................................................................................................................................6

3.3 PLUMBING OF THE UNIT .....................................................................................................................................................................6

3.4 ELECTRICAL WIRING .............................................................................................................................................................................7

3.5 FIRST TIME STARTUP .............................................................................................................................................................................7

4. USE & OPERATION .............................................................................................................................................................................................8

4.1 THE CONTROL PANEL ...........................................................................................................................................................................8

4.2 USING THE CONTROL PANEL ............................................................................................................................................................8

4.2.1 ON/OFF MODE.....................................................................................................................................................................................8

4.2.2 SWITCHING MODES.........................................................................................................................................................................9

4.2.3 SETTING THE TEMPERATURE.......................................................................................................................................................9

4.2.4 CLOCK SETTINGS................................................................................................................................................................................9

4.2.5 TIMER SETTINGS ..............................................................................................................................................................................10

4.2.6 SILENT SETTINGS.............................................................................................................................................................................11

4.2.7 KEYBOARD LOCK ............................................................................................................................................................................11

4.2.8 FAULT INTERFACE ..........................................................................................................................................................................11

4.3 TROUBLESHOOTING GUIDE...........................................................................................................................................................12

5. WI-FI OPERATION ...........................................................................................................................................................................................14

5.1 INTRODUCTION....................................................................................................................................................................................14

5.2 INSTALLATION .......................................................................................................................................................................................14

5.3 APP SETUP................................................................................................................................................................................................15

5.3.1 CREATE AN ACCOUNT..................................................................................................................................................................15

5.3.2 ADD YOUR DEVICE & CONFIGURE WI-FI ............................................................................................................................15

5.3.3 DEVICE MANAGEMENT................................................................................................................................................................17

6. MAINTENANCE & INSPECTION ................................................................................................................................................................19

7. APPENDIX............................................................................................................................................................................................................23

7.1 CABLE SPECIFICATIONS ...................................................................................................................................................................23

7.2 REFRIGERANT SATURATION TEMPERATURE ........................................................................................................................23

7.3 INTERFACE DIAGRAMS .....................................................................................................................................................................23

7.4 WIRING DIAGRAMS.............................................................................................................................................................................25

7.5 WARRANTY TERMS .............................................................................................................................................................................28

Page 2

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

BEFORE YOU BEGIN

1Ensure that the heat pump arrives in good condition upon delivery.

2 Adequate airflow around the heat pump is vital, ensure that the surroundings are kept clear of

debris, tree branches and anything that might impact the ventilation of the unit. Refer to Section 3.2

of this manual for more information.

3Register your unit’s warranty details and upload your invoice online at:

www.guardianpoolheating.com.au/

4 Your unit should be installed in an outdoor area for maximum performance, for indoor installations

contact Guardian for guidance.

5Check the condensate drain of the heat pump regularly to avoid blockages or debris build up.

Keeping it in good order ensures condensation easily drains from the unit.

6 When using Wi-Fi control, ensure that you have full Wi-Fi strength available where the heat pump is

installed. You will require a 2.4gHZ connection to use the Wi-Fi Controller App.

Page 3

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

1. FOREWARD

Congratulations on purchasing your Guardian Lux-V high efficiency inverter pool heat pump!

Guardian heat pumps are designed and built to the highest industry standard and are backed by our extended warranty

service for peace of mind.

A warranty registration is highly recommended to be submitted online at: www.guardianpoolheating.com.au

Ensure all information contained within this manual is read and fully understood before attempting to install or operate

the pool heat pump.

If technical support or further information is required please contact support@guardianpoolheating.com.au

We trust you'll have a longer and more enjoyable time in your pool with your Guardian heat pump!

Thank you!

1.1 WARNINGS

Please read this manually carefully before installing or

operating the unit.

The unit must only be installed by a qualified professional.

•The unit must be installed in accordance with national

wiring regulations.

•Before obtaining access to terminals, all supply circuits

must be disconnected.

•An all-pole disconnection device must be incorporated which as at least 3mm clearances in all poles, a leakage

current that may exceed 10mA, residual current device (RCD) having a rated residual operating current not

exceeding 30mA and disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

•Do not accelerate the defrosting process or clean the unit in any way that is not recommended in this manual.

•Do not store the unit in a room with continuously operating ignition sources, or install near any flammable gas.

•Do not pierce or burn the unit.

•Make sure the unit has good earthing and power connection to reduce the risk of electric shock.

•If the supply cord is damaged it must be replaced by the supplier to avoid hazards occurring.

•Ensure there is a circuit breaker for the unit to avoid electric shock or fires.

•Use supply wires suitable for 75˚C

•The unit is equipped with an over-load protection system. It does not allow for the unit to start for at least 3 minutes

from a previous stoppage.

•Be aware that refrigerants may not contain an odour.

•The installation of pipe-work should be kept to a minimum 30m2

•Caution: Single wall heat exchanger, not suitable for a potable water connection.

•Directive 2002/96/EC (WEEE):

The symbol depicting a crossed-out waste bin that is underneath the appliance indicates that this product, at the end

of its useful life, must be handled separately from domestic waste, or must be taken to a recycling centre for electric

and electronic devices.

•Directive 2002/95/EC (RoHs):

This product is compliant with directive 2002/95/EC (RoHs) concerning restrictions for the use of harmful

substances in electric and electronic devices

Information in this manual is correct at the time of publishing and while the information is correct at the date of

publication, changes in circumstances after the time of publication may impact on the accuracy of the information. The

information may change without notice and Guardian is not in any way liable for the accuracy of any information printed

and stored or in any way interpreted and used by a user.

Page 4

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

2. SPECIFICATIONS

2.1 PERFORMANCE DATA

GLV-13 GLV-17 GLV-20 GLV-24 GLV-28 GLV-32T

Heating

Capacity

(27/24.3˚C)

kW 3.5~13.5 3.8~17.5 5.2~20.6 6.2~24.0 8.5~28.0 10.4~32.0

Btu/h 11900~40800 12920~59500 17680~70040 21080~81600 28900~95200 35360~108800

Heating

Power Input kW 0.26~2.08 0.27~2.73 0.38~3.17 0.44~3.53 0.60~4.31 0.77~4.92

C.O.P 13.5~6.5 13.8~6.4 13.6~6.5 14.5~6.8 14.2~6.5 13.5~6.5

Heating

Capacity

(15/12˚C)

kW 2.4~10.0 2.8~12.8 4.1~14.8 4.8~17.5 5.6~20.3 6.5~22.5

Btu/h 8160~34000 9520~43520 13940~50320 16320~59500 19040~69020 22100~76500

Heating

Power Input kW 0.32~2.13 0.37~2.78 0.55~3.29 0.64~3.65 0.71~4.14 0.88~5.00

C.O.P 7.5~4.7 7.5~4.6 7.4~4.5 7.5~4.8 7.9~4.9 7.4~4.45

Power Supply 220-240/1/50 380-415/3/50

Connection Type 15amp hardwired hardwired hardwired hardwired hardwired

Compressor Quantity 1 1 1 1 1 1

Compressor Type rotary rotary rotary rotary rotary rotary

Fan Number 1 1 1 1 1 1

Fan Power

Input

W 250 250 250 250 250 250

Fan Rotate

Speed RPM 500~750 500~750 500-750 600-800 600-800 600-800

Fan Direction Vertical Vertical Vertical Vertical Vertical Vertical

Noise (1M) dB(A) 41-53 43-54 44-55 45-56 47-58 48-60

Water

Connection mm 50 50 50 50 50 50

Flow Rate L/min 108 133 158 167 200 200

Water

Pressure

Drop (max)

kPa 6.8 8.5 16.2 16.2 23.8 23.8

Net

Dimensions

(LxWxH)

mm 650 x 626 x 943.5 740 x 716 x 1115 774 x 796 x 1267

*Please note: Information is correct at the time of printing and may be liable to change at any time without notice.

Heating: Outdoor air temp: 27˚C/24.3˚C | Inlet water temp: 26˚C

Outdoor air temp: 15˚C/12˚C | Inlet water temp: 26˚C

Operating Range: Ambient Temperature: -15-43˚C | Water temperature: 9-40˚C

Page 5

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

2.2 DIMENSIONS

GLV-13 & GLV-17

Unit: mm A (L) B (W) C (H) D E F G H I

650 626 943.5 622 600 600 430 385 107.5

GLV-20 & GLV-24

Unit: mm A (L) B (W) C (H) D E F G H I

740 716 1115 712 690 690 470 466 96

GLV-28 & GLV-32T

Unit: mm A (L) B (W) C (H) D E F G H

774 796 1267 749 749 600 505 97.4

Page 6

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

3. INSTALL & CONNECTION

3.1 INSTALLATION DIAGRAM

Note: Diagram is for reference only.

The Heat Pump can be installation can be configured with a bypass system to enable operation of the filtration and

sanitation systems to continue while the heat pump is not in use.

Upon receiving your unit you will also receive 1x Instruction Manual, 2x Connectors, 2x Rubber Rings & 4x Rubber Feet.

When using the unit for the first time:

•Open the water valves.

•Make sure that the pump and the water-in pipe have been filled with water.

•Close the valve and start the unit.

Note: It is necessary that the water-in pipe is higher than the pool’s surface.

3.2 LOCATION OF INSTALLATION

Note: as per the diagram, you need to have clearances of: 700mm at the front,

300mm at the rear, 1500mm at the top of the unit, and 700mm on both sides.

DO NOT place the unit in an enclosed area or room to prevent the discharge air

being recirculated.

DO NOT place the unit near shrubs that may grow and block the air inlet.

Placing the unit in a location where the unit is denied a continuous source of

fresh air will reduce efficiency and may prevent adequate heat delivery.

The heat pump should be installed as close as possible to filtration equipment. The longer the distance from the pool, the

greater the heat loss from the piping.

Majority of the piping is usually buried, therefore the heat loss is minimal for runs of up to 15 metres (each way, 30 in

total) unless the ground is wet or the water table is high. A very rough estimate of heat loss per 30 metres is 0.6kW an

hour for every 5˚C difference in temperature between the pool water and the ground surrounding the pipe, translating to

roughly 3% to 5% increase in run time.

3.3 PLUMBING OF THE UNIT

The titanium heat exchanger of the unit requires no special plumbing

arrangements. The water pressure drop is less than 10kPa at maximum

flow rate. Since there is no residual heat or flame temperatures, the unit

doesn’t require copper heat sink piping. PVC pipe can be ran straight into

the unit.

LOCATION: Connect the unit in the pool pump discharge (return) line downstream of all filter and pool pumps, and

upstream of any chlorinators, ozonators or chemical pumps.

Page 7

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

Standard models have slip glue fittings which accept 40mm or 50mm PCV pipe for connection to the pool or spa filtration

plumbing. By using a 50mm to 40mm reducer you can plumb 40mm.

CONDENSATION: Since the heat pump cools down the air from 4-5˚C, water may condense on the fins of the

evaporator. If the relative humidity is very high, this could be multiple litres per hour. The water will run down the fins

into the basepan and drain our through the barbed plastic condensation drain fitting on the side of the basepan. This

fitting is designed to accept 20mm clear vinyl tubing which can be pushed on by hand and ran to a suitable drain. It is very

easy to mistake the condensation for a leak inside the unit.

NB: A quick way to determine if the water is condensation is to shut off the unit while keeping the pool pump running. If

water stops running out of the basepan then it is condensation. Another way is to test the drain water for chlorine, if

there is no chlorine present then it is condensation.

3.4 ELECTRICAL WIRING

Note: Although the unit’s heat exchanger is electrically isolated from the rest of the unit, it simply prevents the flow of

electricity to or from the pool water. Grounding the unit is still required to protect you against short circuits inside the

unit. Bonding is also required.

The unit has a separate molded-in junction box with a standard electrical conduit nipple already in place. Just remove the

screws and the front panel, feed your supply lines in through the conduit nipple and wire-nut the electric supply wires to

the three connections already in the junction box (four connections if three phase). To complete the electrical hookup,

connect the heat pump by electrical conduit, UF cable or another suitable means as specified (as permitted by local

electrical authorities) to a dedicated AC power supply branch circuit equipped with the proper circuit breaker,

disconnect or time delay fuse protection.

DISCONNECT: A disconnect means (circuit breaker, fused or un-fused switch) should be located within sight of and

readily accessible from the unit. This is common practice on commercial or residential air conditioners and heat pumps. It

prevents remotely-energising unattended equipment and permits turning off power at the unit while it is being serviced.

3.5 FIRST TIME STARTUP

Note: In order for the unit to heat the pool or spa the filter pump must be running to circulate water through the heat

exchanger.

STARTUP PROCEDURE

(After installation has been completed follow these steps)

1. Turn on the filter pump. Check for water leaks and verify flow to and from the pool.

2. Turn on the electrical power supply to the unit, then press the ON/OFF key on the controller. The unit should

start within a few seconds.

3. After running for a few minutes ensure the air leaving the unit is cooler (between 5-10˚C)

4. With the unit operating turn the filter pump off. The unit should also turn off automatically.

5. Allow the unit and pool pump to run 24hrs per day until the desired water temperature is reached at which point

the compressor will slow down to maintain temperature.

TIME DELAY

The heat pump is equipped with a time delay, this prevents the unit from short cycling. The fan will always start first,

followed by the compressor.

Page 8

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

4. USE & OPERATION

4.1 THE CONTROL PANEL

POWER Start or shut down the unit, cancel the current operation, return to the previous menu.

MODE Switch between unit modes, temperature settings & parameter settings.

CLOCK User clock & timer settings.

SILENT Turn on or off the silent function OR set a silent timer function.

UP Scroll up or increase value.

DOWN Scroll down or decrease value.

Icons Explained

Cooling Displays during cooling

Water outlet Water outlet temperature

Heating Displays during heating Water inlet Water inlet temperature

Automatic Displays under auto mode

Lock Displays when keyboard is locked

Defrosting Displays during defrosting

Fault Displays when a fault occurs

Silent Indicates silent status

Degrees Indicates temperature in Celsius

Timing Timing periods that can be set

Setting Parameter is adjustable

4.2 USING THE CONTROL PANEL

4.2.1 ON/OFF MODE

The heat pump will display ‘OFF’ on the screen while the unit is not turned on. When it has been turned on, the

water inlet temperature is displayed on the screen.

Simply press the POWER button for half a second to turn the unit on or off.

Page 9

LUX-V SERIES

INSTALLATION & OPERATION MANUAL

4.2.2 SWITCHING MODES

Cooling Auto Heating

From the main menu, press the MODE button to switch the unit among heating, cooling and automatic mode.

The mode change will automatically save after 2 seconds of idle operation.

Note: When the unit is in Defrosting mode, the defrosting symbol will appear on the screen. Upon completing

the defrosting, the unit automatically switches to heating/automatic mode.

4.2.3 SETTING THE TEMPERATURE

To change the set temperature of the unit, simply press the UP or DOWN key. The set temperature will begin

to flash when you are altering it. Use the keys to adjust the temperature as required, then let the screen sit

idle for 5 seconds to save the changes.

4.2.4 CLOCK SETTINGS

To change the system time of the unit, press the CLOCK button.

To set the hour digit, press the POWER button. The hour value will begin to flash indicating it is currently

being edited. Use the UP or DOWN keys to adjust the hour value, then press POWER to save and move onto

the minute value.

When the minute value is flashing, press the UP or DOWN arrows again, pressing POWER again to save your

changes.

After pressing the POWER button to change both hour & minute values, the screen will return back to the

main menu.

Press the CLOCK button

Use UP & DOWN to adjust the

temperature



Press CLOCK Press POWER

The hour will begin to flash

Adjust the hour then press

POWER to adjust minute

Adjust minutes then press

POWER to save

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Guardian Wärmepumpe Handbücher

Guardian

Guardian PLATINUM Series Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung