Gudrutis Super-G Active S Technisches Handbuch
Detailed instructions for use of Gudrutis Super-G Active S
Detailed instructions for use of the Super-G app
CONTENTS
About the watch-phone 3
Watch model and main functions 3
Technical parameters of Gudrutis Super G Active S 3
Get to know your watch-phone 4
Device set 4
Watch screen control
Getting ready 5
SIM card 5
Charging and turning of the watch 5
Watch menu 6
Secret Watch menu 6
Controlling the watch with Super-G app 7
How to install the app? 7
How to register and add Gudrutis? 8
More features of Super-G 11
Calls 11
Messages 11
Health 11
Child's location 11
Multiple devices 12
More settings 12
Warranty and servicing 14
Questions? Contact us! 14
About the watch-phone
Watch model and main functions
Gudrutis Super-G Active S
Technical parameters of Gudrutis Super G Active S
• Calls, voice and text messages to the watch;
• Calls and voice messages from the watch;
• 10 contact book;
• 1.3" IPS colour touch screen;
• 240 * 240 screen resolution;
• CPU: MTK;
• Ultra-low power dissipation;
• Battery 840 mAh;
• Nano SIM card;
• Positioning**;
• Alarm;
• SOS help button;
• 'Not to disturb' mode;
• Low battery messages;
• Heart rate***;
• Body temperature***;
• Pedometer
• Weather information (real time);
• Stopwatch;
• Countdown.
* Battery life depends on the watch update settings you choose, the way you use the watch, and
natural wear.
** Navigation outdoors according to WIFI and GPS, indoors – WIFI and CELLS (the position
of the operators' GSM towers). Positioning error is possible depending on the communication
operator, positioning signal and other technical conditions. This is not an exact location
positioning device!
*** The phone - watch is not a medical temperature and heart rate measuring device.
The result of temperature measurement is highly dependent on how the device is worn
(more close to the limb or worn loosely), how long before the measurement the device
was worn on the body, the effect of ambient temperature and other circumstances. We
recommend measuring the temperature half an hour after placing the device on your
hand, the most convenient place to measure is at least 2-3 cm above your wrist.
!Attention! Calls and data transfer require a 2G SIM card with a call plan, SMS and mobile
data plan (about 200 MB/month).
Attention! Danger! We do not recommend immersing the device in water/liquids or pouring
water/liquids directly onto the housing. If the watch case is wet or mechanically damaged,
the warranty shall be void.
Get to know your watch-phone
Device set
Make sure the box contains all components:
- watch-phone
- charging unit
- 1 extra shorter silicone bracelet
- 1 extra SIM card cover
- 1 SIM cover removing tool
- start guide
Watch screen control
Swipe left to navigate
between the watch
functions
Click on the icon to
select the required
function
Swipe right to
return to the menu
or exit a function
Swipe up to view your
device's IMEI. Swipe
down to check the
weather
Getting ready
SIM card
Insert the SIM* card into the watch as shown in the picture:
- Make sure the SIM card has no PIN code (you can remove it by inserting the SIM card
into the mobile phone);
- Make sure the device is off
- Lift the SIM card cover;
- Carefully insert the card into the cover;
- Close the sim socket;
*Important! The watch only supports 2G SIM cards. The mobile data, chat and SMS plan
must be activated on the SIM card. We recommend having about 200 MB of mobile data per
month.
Charging and turning of the watch
After successfully inserting the SIM card, charge the watch:
○Attach the magnetic charger to the back of the watch;
○Make sure the charger cable is straight and securely fastened;
○Leave the device on a hard, stationary surface;
○You should see the battery charging icon on the screen;
○Charge the watch until you see that the battery is fully charged!*
○Turn on the Super-G Active S watch by pressing and holding the button on the side.
*Important! You can charge the watches with a charger adapter that supports up to 5 V/1 A.
*Charging time is 2-3 hours. We recommend charging regularly before the
watch-phone is completely discharged.
Watch menu
Swipe the touch screen from right to left to find the following menu items:
1. Address book:
●go in and click on a contact to make a call
●to end the call, press the “end call” on the watch screen or the button with the
lightning symbol on the right side of the watch.
2. Text messages:
●here you can read the last received text message
3. Voice messages (chats):
●go in and click on the received message to listen it
●click the "Microphone icon" and speak; release to send the message
4. Heart rate:
●you will see the current heart rate and one previous measurement
5. Body temperature:
●body temperature can be measured from the watch or from the app.
6. Pedometer:
●you will see how far and how many steps have been walked, and
approximately how many calories have been burned
7. Countdown
8. Stopwatch
9. Settings:
●Language (here you can select the language of the device)
●Style (here you can choose from two available watch styles).
●Volume and brightness (you can adjust the volume and brightness of the
watch)
10. Swipe from top to bottom on the home screen to see the weather in real time.
11. Swipe up from the bottom of the home screen to see the IMEI number and QR code.
Watch secret menu
The watch's secret menu is activated by tapping the QR code 10 times. You will find the
following items in the secret menu (secret menu in English):
1. Power off
●Switch off the appliance by pressing the 'Power off'.
2. Music Test
●Selecting this test starts playing music for checking the speaker function.
3. Factory Test
●This mode is for testing the watch: check how the pulse, temperature measurement
functions work, and whether the physical buttons and sensors work properly.
4. Restore
●Factory parameter reset function. Touching the screen will restore the factory
settings.
Controlling the watch with Super-G app
How to install the app?
- You can find the Super-G app on Google Play and the App Store;
- Download the app to your phone or other smart device;
-Register the device in the app by pressing the menu function - "Add a device":
a. Scan the QR code on the watch;
b. Or enter the IMEI/ID number you will find in the watch (or on the packaging)
- Follow the instructions in the app to set the
parameters. The watch can be controlled from several
devices.
Should you have any questions, contact our team.
How to register and add Gudrutis?
1. Download the app, click "Start" and select your language.
2.Scan the QR code on the watch or enter the IMEI code manually (you will find the code on
both the watch and the back of the box).
3.Enter your child information and your phone number.
Important! Allow access after you receive a notification about access to your phone's camera,
photo gallery, location, and microphone. Otherwise, the app may not be fully functional.
You are connected!
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Gudrutis Betrachten Handbücher
