Guild CSD36G2 Benutzerhandbuch
Original Instruction Manual
After Sales Support
CSD36G2
GUILD
3.6V Lithium-Ion Screwdriver
Important - Please read these instructions fully before operating or maintaining your Guild Lithium-Ion Screwdriver
These instructions contain important information that will help you get the best from your Guild
Lithium-Ion screwdriver, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
Customer Helpline 0333 3201989
2
Contents
Safety Information............................................................................................3
In The Box.........................................................................................................8
Accessories.......................................................................................................8
Operating Instructions.....................................................................................9
Maintenance...................................................................................................11
Technical Data................................................................................................11
Environmental Protection...............................................................................12
Guarantee.......................................................................................................13
Customer Helpline 0333 3201989
3
To reduce the risk of injury. Please read
the instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Indoor use only
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
The following warning symbols appear
throughout this assembly manual and
indicate the appropriate safety measures
you should take when assembling and
operating the Lithium-Ion Screwdriver.
Customer Helpline 0333 3201989
4
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
Do not expose to rain or water
Do not burn
Li-Ion battery. This product has been
marked with a symbol relating to
‘separate collection’ for all battery packs
and battery pack. It will then be recycled
or dismantled in order to reduce the
impact on the environment. Battery packs
can be hazardous for the environment
and for human health since they contain
hazardous substances.
Fuse
T 0.2 A time lag fuse with rated current of
0.2 A
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your local authorities or retailer for
recycling advice.
Li-I on
Li-Ion
Customer Helpline 0333 3201989
5
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Safety Information
General Power Tool Safety Warnings
Original Instructions
Important - Please read these instructions fully before starting assembly
Customer Helpline 0333 3201989
6
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly
Customer Helpline 0333 3201989
7
outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly
Customer Helpline 0333 3201989
8
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly
Customer Helpline 0333 3201989
9
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly
Customer Helpline 0333 3201989
10
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly
Inhaltsverzeichnis
Andere Guild Akkuschrauber Handbücher
