GW Instek ASR-002 Bedienungsanleitung

Three Phase Power Controller

ASR-002

USER MANUAL

ISO-9001 CERTIFIED MANUFACTURER

This manual contains proprietary information, which is protected by

photocopied, reproduced or translated to another language without

prior written consent of Good Will company.

The information in this manual was correct at the time of printing.

However, Good Will continues to improve products and reserves the

rights to change specification, equipment, and maintenance

procedures at any time without notice.

Good Will Instrument Co., Ltd.

No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.

Table of Contents

SAFETY INSTRUCTIONS .................................................. 4

GETTING STARTED.......................................................... 7

ASR-002 Overview ...................................................7

Front Panel ..............................................................8

Rear Panel ............................................................. 11

OPERATION .................................................................. 13

Basic Operation..................................................... 14

Advance Setting..................................................... 16

Phase Angle Setting............................................... 24

Voltage Ramp Setting ............................................ 25

Frequency Sweep Setting ....................................... 26

Factory Default Settings ........................................ 27

Wire Connection & Accessories ............................. 29

APPENDIX ..................................................................... 32

ASR-002 Dimension ............................................... 32

Using the Rack Mount Kit ...................................... 33

Command List ....................................................... 35

ASR-002 Error Messages........................................ 36

Display Error Message........................................... 37

Firmware Upgrade Procedure ................................ 38

LED ASCLL Table Character Set ............................. 40

ASR-002 Series User Manual

SAFETY INSTRUCTIONS

This chapter contains important safety

instructions that you must follow during

operation and storage. Read the following before

any operation to ensure your safety and to keep

the instrument in the best possible condition.

Safety Symbols

These safety symbols may appear in this manual or on the

instrument.

WARNING

Warning: Identifies conditions or practices that

could result in injury or loss of life.

CAUTION

Caution: Identifies conditions or practices that

could result in damage to the ASR-002 or to other

properties.

DANGER High Voltage

Attention Refer to the Manual

Protective Conductor Terminal

Earth (ground) Terminal

SAFETY INSTRUCTIONS

Do not dispose electronic equipment as unsorted

municipal waste. Please use a separate collection

facility or contact the supplier from which this

instrument was purchased.

Safety Guidelines

General

Guideline

CAUTION

Do not place any heavy object on the ASR-002.

Avoid severe impact or rough handling that leads to

damaging the ASR-002.

Do not discharge static electricity to the ASR-002.

Use only mating connectors, not bare wires, for the

terminals.

Do not block the cooling fan opening.

Do not disassemble the ASR-002 unless you are qualified.

If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment

may be impaired.

Power

Supply

WARNING

AC Input voltage range:

230 ~ 240 Vac

Frequency: 50/60 Hz

To avoid electrical shock connect the protective grounding

conductor of the AC power cord to an earth ground.

Cleaning the

ASR-002

Disconnect permanently connected power input before

cleaning.

Use a soft cloth dampened in a solution of mild detergent

and water. Do not spray any liquid.

Do not use chemicals containing harsh material such as

benzene, toluene, xylene, and acetone.

ASR-002 Series User Manual

Operation

Environment

Location: Indoor, no direct sunlight, dust free, almost non-

conductive pollution (Note below)

Relative Humidity: 20%~ 80%, no condensation

Altitude: < 2000m

Temperature: 0°C to 40°C

Storage

environment

Location: Indoor

Temperature: -10°C to 70°C

Relative Humidity: ≤90%, no condensation

Disposal

Do not dispose this instrument as unsorted municipal waste.

Please use a separate collection facility or contact the supplier

from which this instrument was purchased. Please make sure

discarded electrical waste is properly recycled to reduce

environmental impact.

Certification of Compliance

----------------------------------------------------------------------------------

The product is in conformity with the directive: EN 61010-1 /

EN 61326-1 / WEEE / RoHS

GETTING STARTED

This chapter describes the ASR-002 power

controller in a nutshell, including its main

features and front/rear panel introduction.

ASR-002 Overview ..............................................................7

Front Panel .........................................................................8

Rear Panel ........................................................................ 11

ASR-002 Overview

ASR-002, which is a three-phase power controller, is able to control

up to 3 single phase power supply units (For ASR-2000 Series,

the factory installed option Opt 1 is necessary).

It effectively makes AC output conformed to 1P3W/3P4W that

generally unit requires, and also turns output into 3P3W via

designated wire method.

When the select single phase power is greater than the capacity of

2kVA, it is suggested that output should be connected to external

terminal for safety consideration.

Note

The communnication process for ASR-002 and ASR series:

1. First power on ASR series *3 followed by ASR-002.

2. Manually perform output on for ASR-002 and it will

execute connection detection one time.

ASR-002 Series User Manual

Front Panel

Section

Figure

Description

Header Displays

FREQUENCY: It displays frequency.

VOLTAGE: It displays voltage.

Normally, it displays measured voltage

value by current phase. While user

presses V Set key, it displays the set

voltage value by current phase.

MULTIMETER: It displays A current /

W power / PF power factor.

Function Keys

It changes header display A W 

PF.

ON: Output on.

OFF: Output off.

GETTING STARTED

Note

It can be operated when connected to ASR series only.

V Set: It configures voltage.

Range: It toggles between 100V and 200V.

Auto: It enters Auto range by long press.

When operating under Advance

Setting Menu, this key functions as

Enter.

F Set: It configures frequency.

P Set: It configures L2 / L3 phase.

L1 / L2/ L3: It changes among L1 

L2 L3.

When operating under Advance

Setting Menu, this key functions as

next menu item.

Mode: It toggles between 1P3W 3P4W.

Func: It configures advance setting by

long press.

When operating under Advance

Setting Menu, this key functions as

previous menu item.

Local: It cancels connection and

enters the local opeation mode.

Knob Key: It adjusts value by scroll.

Also, it switches input adjustion

position by press.

Display Icons

It indicates remote control mode.

ASR-002 Series User Manual

It indicates that error of control occurs.

It indicates output phase.

It indicates output mode.

It indicates output range.

It indicates measurement unit display.

Andere Handbücher für ASR-002

Inhaltsverzeichnis

Andere GW Instek Controller Handbücher

GW Instek

GW Instek ASR-002 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung