H3C SecPath M9000-AI-E8 Bedienungsanleitung

H3C SecPath M9000-AI-E8[E16]

Multi Service Security Gateway Series

Installation Guide

New

H3C Technologies Co., Ltd.

http://www.h3c.com.hk

Document version: 6W105-20220319

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

This installation guide describes the installation procedure for the H3C SecPath M9000-AI

multiservice security gateway series. It includes the following topics:

•

Chassis views.

•

Preparing for installation.

•

Installing the gateway.

•

Accessing the gateway and configuring basic settings.

•

Troubleshooting.

•

Replacing removable components.

•

FRUs and compatibility matrixes.

•

Technical specifications.

•

LEDs.

•

Cables.

•

Slot arrangement and interface numbering.

•

Engineering labels.

•

Cabling recommendations.

•

Repackaging the gateway.

This preface includes:

•

Audience

•

Conventions

•

Documentation feedback

Audience

This documentation is intended for:

•

Network planners

•

Field technical support and servicing engineers

•

Network administrators working with the M9000-AI security gateway series

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention

Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

Convention

Description

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntaxchoices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention

Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention

Description

WARNING An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT

An alert that calls attention to essential information.

NOTE

An alert that contains additional or supplementary information.

TIP

An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Represents a generic network device, such as a router, switch, or firewall.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a

security product, such as a firewall, UTM, multiservice security gateway,

or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Chassis views································································································1

M9000-AI-E8······················································································································································1

M9000-AI-E16····················································································································································2

Chassis views

H3C SecPath M9000-AI multiservice security gateways include the M9000-AI-E8 and

M9000-AI-E16 models.

The main components of the gateway include supervisor engine modules (SEMs), interface switch

modules, interface modules, AI security engine modules, service modules, switching fabric modules,

fan trays, and power supplies.

M9000-AI-E8

Figure 1 Front view

Figure 2 Rear view

Table 1 Descriptions for the gateway sections

Section Description

SEM section No SEMs are provided with the gateway. Purchase SEMs yourself.

Section Description

Interface switch

module/AI

security engine

module/service

module section

No interface switch modules, AI security engine modules, or service modules are

provided with the gateway. Purchase them yourself.

An interface switch module provides two slots for the installation of service modules or

interface modules.

Power supply

section No power supplies are provided with the gateway. Purchase power supplies yourself.

Determine the number of power supplies based on the system power consumption.

Fan tray section No fan trays are provided with the gateway. Purchase fan trays yourself.

Switching fabric

module section

No switching fabric modules are provided with the gateway. Purchase switching fabric

modules yourself.

Only slots 6 and 7 are available for installing switching fabric modules. Both of the slots

must be installed with switching fabric modules.

M9000-AI-E16

Figure 3 Front view

Figure 4 Rear view

Table 2 Descriptions for the gateway sections

Section Description

SEM section No SEMs are provided with the gateway. Purchase SEMs yourself.

Interface switch

module/AI

security engine

module/service

module section

No interface switch modules, AI security engine modules, or service modules are

provided with the gateway. Purchase them yourself.

An interface switch module provides two slots for installation of service modules or

interface modules.

Switching fabric

module section

No switching fabric modules are provided with the gateway. Purchase switching fabric

modules yourself.

Only slots 10 and 11 areavailable for installing switching fabric modules. You can install

one switching fabric module or two switching fabric modules for 1+1 redundancy.

Power supply

section No power supplies are provided with the gateway. Purchase power supplies yourself.

Determine the number of power supplies based on the system power consumption.

Fan tray section The gateway comes with six fan trays installed in the slot.

NOTE:

•

Directly install an AI security engine module on the slot of the gateway. Install a service module

on the slot of the interface switch module.

•Install an interface module on the slot of the interface switch module.

Andere Handbücher für SecPath M9000-AI-E8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere H3C Tor Handbücher

H3C

H3C MSR3610-I Series Bedienungsanleitung

H3C

H3C Voice Gateway H3C VG 10-10 Bedienungsanleitung

H3C

H3C MSR2600-6-X1 Bedienungs- und Wartungshandbuch

H3C

H3C SecPath M9000-AI-E8 Bedienungsanleitung

H3C

H3C MSR2600-10-X1 Bedienungsanleitung

H3C

H3C SecPath M9000 Series Bedienungsanleitung

H3C

H3C ICG2000 Bedienungsanleitung

H3C

H3C SecPath M9000 Series Bedienungsanleitung

H3C

H3C VG Series Bedienungsanleitung

H3C

H3C SecPath M9000 Series Bedienungsanleitung

H3C

H3C MSR3610-I-DP Bedienungsanleitung

H3C

H3C VG 10-40 Bedienungsanleitung

H3C

H3C SecPath V1000-A Bedienungsanleitung

H3C

H3C VG 20-16 Bedienungsanleitung

H3C

H3C VG 31-08 Bedienungsanleitung

H3C

H3C ICG2000 Bedienungsanleitung

H3C

H3C SR6602-I AI Series Bedienungsanleitung

H3C

H3C MSR3610-I Series Bedienungs- und Wartungshandbuch

H3C

H3C VG 21-08 Bedienungsanleitung

H3C

H3C SecPath V100-E Bedienungsanleitung

H3C

H3C MSR3610-X1 Bedienungsanleitung

H3C

H3C SecPath M9000-AI Bedienungsanleitung

H3C

H3C SR6602-I AI Series Bedienungs- und Wartungshandbuch

H3C

H3C VG Series Merkblatt

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung