H3C UniServer R4700 Bedienungs- und Wartungshandbuch

H3C UniServer R4700 G5 Server

Processor Installation Quick Start

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W100-20210712

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage, use,

and disposal of this product must meet the applicable national laws and regulations.

Preface

This preface includes the following topics about the documentation:

•

Audience.

•

Conventions.

•

Documentation feedback.

Audience

This documentation is intended for:

•

Network planners.

•

Field technical support and servicing engineers.

•

Server administrators working with the Server.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention

Description

Boldface

Bold

text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention

Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the

New User

window opens; click

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention

Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION:

An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT:

An alert that calls attention to essential information.

NOTE:

An alert that contains additional or supplementary information.

TIP:

An alert that provides helpful information.

Network topology icons

Convention

Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Content

Overview····························································································································································1

Processor kit······················································································································································1

Preparing for installation····································································································································1

Installing the processor······································································································································2

Installing DIMMs·················································································································································8

Starting the server··············································································································································9

Overview

The information in this document might differ from your product if it contains custom configuration

options or features.

The figures in this document are for illustration only.

Processor kit

The processor kit for an H3C UniServer R4700 G5 server includes the following components:

•

Processor

•

Retaining bracket

•

Heatsink

T15 and T30 Torx screwdrivers are required for processor installation. A T15 Torx screwdriver is

provided with the server. You need to prepare a T30 Torx screwdriver yourself.

Preparing for installation

WARNING

reduce the risk of personal injury from hot surfaces, allow the server and the internal system

components to cool before touching them.

CAUTION:

•

To avoid processor and system board damage, only H3C-authorized personnel and

professional server engineers can install a processor.

•

To prevent ESD damage to electronic components, wear a reliably-grounded ESD wrist strap

and a pair of ESD gloves when installing or removing the components.

To prepare the server for processor installation:

1. Back up all server data.

2. Power off the server.

3. Disconnect the power cords.

4. Remove the server from the rack.

5. Remove the access panel, as shown in Figure1-1.

a. (Optional.) If the access panel is locked, use a Phillips screwdriver to loosen the screw on

the locking lever, as shown by callout 1.

b. Press the release button to release the locking lever, and then lift up the locking lever as

shown by callout 2. The access panel slides towards the rear of the server automatically.

c. Lift the access panel away from the server, as shown by callout 3.

Figure1-1 Removing the access panel

6. Remove the chassis air baffle. As shown in Figure1-2, lift the air baffle up to remove it from the

chassis.

Figure1-2 Removing the chassis air baffle

Installing the processor

CAUTION:

•

The server can use two or four processors.

•

To prevent damage to the pins on the processor socket, always install a cover over an empty

processor socket.

•Make sure all processors on a server are the same model.

To install the processor:

1. Remove the heatsink protective cover. As shown in Figure1-3, lift the cover straight up and

away from the heatsink.

CAUTION:

When you remove the protective cover from the heatsink, be careful not to touch the

thermal

grease on the heatsink.

Figure1-3 Removing the protective cover

2. Install the retaining bracket onto the heatsink.

a. As shown in Figure1-4, align the alignment triangle on the retaining bracket with the cut-off

corner of the heatsink.

b. Lower the bracket vertically down on the heatsink until the four corners of the bracket click

into the four corners of the heatsink.

For the processor to be installed correctly, make sure the ejector lever on the retaining bracket

is closed as shown in Figure1-5.

Figure1-4 Installing the processor onto the heatsink

Figure1-5 Ejector lever status on the retaining bracket

3. Install the processor onto the retaining bracket.

CAUTION:

To avoid damage to a processor, always hold the processor by the

edges. Never touch the

gold contacts on the processor bottom.

a. Tilt the processor, align the small triangle on the processor with the alignment triangle in

the retaining bracket, and insert one edge of the processor into the retaining bracket. Place

two thumbs against the heatsink, press the other end of the processor, and lower the

processor.

Figure1-6 Installing the processor onto the retaining bracket

b. Open the clips on the retaining bracket until the processor fits snugly onto the retaining

bracket.

Inhaltsverzeichnis

Andere H3C Server Handbücher

H3C

H3C UniServer R4300 G5 Bedienungsanleitung

H3C

H3C UniServer R6700 G3 Bedienungs- und Wartungshandbuch

H3C

H3C SecPath L5030 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer R6900 G5 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer B5700 G5 Bedienungsanleitung

H3C

H3C UniServer R4300 G5 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer R4900 G6 Ultra Bedienungsanleitung

H3C

H3C UniServer R4950 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer R4300 G6 Bedienungsanleitung

H3C

H3C UniServer R2900 G3 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer BT716F Bedienungsanleitung

H3C

H3C UniServer R6700 G3 Bedienungsanleitung

H3C

H3C UniServer R4900 G5 Benutzerhandbuch

H3C

H3C UniServer R4950 G6 Bedienungsanleitung

H3C

H3C UIS-Cell 3000 G3 Bedienungsanleitung

H3C

H3C XE 200 IP Bedienungsanleitung

H3C

H3C UniServer R4900 G5 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer B5800 G3 Bedienungsanleitung

H3C

H3C UniServer T1100 G3 Benutzerhandbuch

H3C

H3C UniServer R4900 G3 Bedienungsanleitung

H3C

H3C UniServer R6900 G3 Bedienungs- und Wartungshandbuch

H3C

H3C UniServer R4900 G3 Bedienungsanleitung

H3C

H3C UniServer E3200 G3 Bedienungsanleitung

H3C

H3C MS8000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung