H3C H3C S3600 Series Montageanleitung
H3C S3600 Series Ethernet Switches
Command Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08192T-20070724-C-1.04
Product Version: Release 1510
Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
customer_service@h3c.com
http://www. h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C S3600 Series Ethernet Switches-Release 1510
documentation set includes the following:
Manual Description
H3C S3600 Series Ethernet Switches
Operation Manual-Release 1510 It is used for assisting the users in data
configurations and typical applications.
H3C S3600 Series Ethernet Switches
Installation Manual It provides information for the system
installation.
Organization
H3C S3600 Series Ethernet Switches Command Manual-Release 1510 is organized
as follows:
Part Contents
1 CLI Introduces the commands used for
switching between the command levels
and command level setting.
2 Login Introduces the commands used for
logging into the Ethernet switch.
3 Configuration File Management Introduces the commands used for
configuration file management.
4 VLAN Introduces the commands used for
configuring VLAN.
5 IP Address and Performance
Configuration
Introduces the commands used for IP
address configuration and IP
performance configuration.
6 Management VLAN Introduces the commands used for
configuring the management VLAN and
DHCP/BOOTP client configuration.
7 Voice VLAN Introduces the commands used for voice
VLAN configuration.
8 GVRP Introduces the commands used for
GVRP configuration.
9 Port Basic Configuration Introduces the commands used for basic
port configuration.
Part Contents
10 Link Aggregation Introduces the commands used for link
aggregation.
11 Port Isolation Introduces the commands used for port
isolation.
12 Port Security-Port Binding Introduces the commands used for port
security configuration and port binding.
13 DLDP Introduces the commands used for
DLDP configuration.
14 MAC Address Table Introduces the commands used for MAC
address forwarding table management.
15 Auto Detect Introduces the commands used for auto
detect configuration.
16 MSTP Introduces the STP-related commands.
17 Routing Protocol Introduces the commands used for
routing protocol configuration.
18 Multicast Introduces the commands used for
multicast configuration.
19 802.1x Introduces the commands used for
802.1x configuration.
20 AAA-RADIUS-HWTACACS-EAD Introduces the commands used for AAA,
RADIUS, HWTACACS, and EAD
configuration.
21 VRRP Introduces the commands used for
VRRP configuration.
22 Centralized MAC Address
Authentication
Introduces the commands used for
centralized MAC address authentication
configuration.
23 ARP Introduces the ARP-related commands.
24 DHCP Introduces the commands used for
DHCP server, DHCP relay, and
DHCP-snooping configuration.
25 ACL Introduces the ACL-related commands.
26 QoS-QoS Profile Introduces the commands used for QoS
and QoS profile configuration.
27 Web Cache Redirection Introduces the commands used for Web
cache redirection configuration.
28 Mirroring Introduces the commands used for port
mirroring.
29 IRF Fabric Introduces the commands used for IRF
fabric configuration.
Part Contents
30 Cluster Introduces the commands used for
cluster management.
31 PoE-PoE Profile Introduces the commands used for PoE
and PoE profile configuration.
32 UDP Helper Introduces the commands used for UDP
Helper configuration.
33 SNMP-RMON Introduces the commands used for
SNMP and RMON configuration.
34 NTP Introduces the NTP-related commands.
35 SSH Terminal Service Introduces the commands used for SSH
configuration.
36 File System Management Introduces the commands used for file
system management.
37 FTP and TFTP Introduces the FTP-/TFTP-related
commands.
38 Information Center Introduces the commands used for
information center configuration.
39 System Maintenance and Debugging Introduces the commands used for
system maintenance and debugging.
40 VLAN-VPN Introduces the commands used for
VLAN VPN configuration.
41 HWPing Introduces the commands used for
HWPing configuration.
42 DNS Introduces the commands used for DNS
configuration.
43 Access Management Introduces the commands used for
Access Management configuration
44 Appendix
Lists all the commands described in this
command manual in an alphabetic
order. The parts and pages where the
commands are described are also given.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
Convention Description
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
# A line starting with the # sign is comments.
II. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Andere Handbücher für H3C S3600 Series
13
Andere H3C Schalten Handbücher
H3C
H3C S9800 Series Bedienungsanleitung
H3C
H3C S9500 Series Montageanleitung
H3C
H3C S5830V2 series Installationshandbuch
H3C
H3C NSQ1GP24TXEA0 LPU Bedienungsanleitung
H3C
H3C S3100 Series Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C S7502 Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C S5170-EI Series Bedienungsanleitung
H3C
H3C S12500 Series Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C S10500 Series Bedienungsanleitung
H3C
H3C S5560S-EI Series Bedienungsanleitung
H3C
H3C S7508E-X Bedienungsanleitung
H3C
H3C LSWM124TG2H Bedienungsanleitung
H3C
H3C s5800 series Bedienungsanleitung
H3C
H3C S9820-64H Bedienungsanleitung
H3C
H3C S5830 Series Bedienungsanleitung
