H3C NSQ1GP24TXEA0 LPU Bedienungsanleitung

Andere H3C Schalten Handbücher

H3C

H3C s5820x series Installationshandbuch

H3C

H3C S6860 Series Bedienungsanleitung

H3C

H3C S12501X-AF Bedienungsanleitung

H3C

H3C S12500X-AF Series Kurzanleitung

H3C

H3C S9850-4C Bedienungs- und Wartungshandbuch

H3C

H3C S3600V3 Series Bedienungsanleitung

H3C

H3C CR19000-16 Bedienungs- und Wartungshandbuch

H3C

H3C S6850 Series Bedienungsanleitung

H3C

H3C S5500-EI series Bedienungsanleitung

H3C

H3C S5110V2 Series Bedienungsanleitung

H3C

H3C S5120-EI Series Bedienungsanleitung

H3C

H3C S3600V2-52TP-SI Installationshandbuch

H3C

H3C S12500-X Stücklistenhandbuch

H3C

H3C S5500-EI series Bedienungsanleitung

H3C

H3C S12500 Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C H3C S3600 Series Montageanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S5560S-EI Series Bedienungsanleitung

H3C

H3C S6890 Series Bedienungsanleitung

H3C

H3C S5820 series Bedienungsanleitung

H3C

H3C S9500E Series Bedienungsanleitung

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C S7500 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Manual version: 6PW105-20181010 BOM: 3123A0R6

i

H3C NSQ1GP24TXEA0 LPU manual

1 Card view

Figure 1 NSQ1GP24TXEA0 LPU

2 Specifications

Figure 2 Front panel of the NSQ1GP24TXEA0

(1) 100/1000 Mbps SFP port (2) 10/100/1000BASE-T Ethernet port

(3) 10 Gbps XFP port (4) XFP port LED

(5) Ethernet port status LED (6) SFP port status LED

Table 1 LPU specifications

Item S

p

ecification

Dimensions (H × W × D) 40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in)

Power consumption 54 W to 95 W

Weight 3.08 kg (6.79 lb)

Hot swapping Supported

Connector type LC

RJ-45

Interfaces

•Sixteen 1000/100 Mbps SFP ports

•Eight combo interfaces

•Two 10GBASE-R-XFP ports

Manual version: 6PW105-20181010 BOM: 3123A0R6

ii

Item S

p

ecification

Transmission speed

•1000/100 Mbps SFP ports—1000/100 Mbps, full duplex.

•1000 Mbps copper Ethernet ports—1000/100/10 Mpbs, half/full duplex.

•10 Gbps XFP ports—10 Gbps.

Ambient temperature

•Operating: 0°C to 45°C (32°F to 113°F)

•Storage: –40°C to +70°C (–40°F to +158°F)

Ambient humidity

•Operating: 10% RH to 95% RH, noncondensing

•Storage: 5% RH to 95% RH, noncondensing

Compatible device model

and slot

•M9006 gateway (slot 2 to slot 5)

•M9010 gateway (slot 0 to slot 3 and slot 6 to slot 9)

•M9014 gateway (slot 0 to slot 5 and slot 8 to slot 13)

•T9006 IPS (slot 2 to slot 5)

•T9010 IPS (slot 0 to slot 3 and slot 6 to slot 9)

•T9014 IPS (slot 0 to slot 5 and slot 8 to slot 13)

NOTE:

•The SFP ports and the 10/100/1000Base-T Ethernet ports on the LPU form one combo interfaces.

Only one port in a combo interface can work at a time.

•The 100/1000 Mbps SFP ports do not support SFP-GE-T transceiver modules.

•10GBASE-R-XFP 10-GE ports can operate only in 10G forced full-duplex mode.

Table 2 SFP module specifications

Type Central

wavelen

g

th

Connector

t

yp

e

Cable

s

p

ecifications

Maximum

transmission

distance

SFP-GE-SX-MM850-A 850 nm LC

50/125 μm

multi-mode fiber 550 m (0.34 miles)

62.5/125 μm

multi-mode fiber 275 m (0.17 miles)

SFP-GE-LX-SM1310-A 1310 nm LC 9/125 μm single

mode fiber 10 km (6.21 miles)

SFP-GE-LH40-SM1310 1310 nm LC 9/125 μm single

mode fiber 40 km (24.86 miles)

SFP-GE-LH40-SM1550 1550 nm LC 9/125 μm single

mode fiber 40 km (24.86 miles)

SFP-GE-LH80-SM1550 1550 nm LC 9/125 μm single

mode fiber 80 km (49.71 miles)

SFP-GE-LH100-SM1550 1550 nm LC 9/125 μm single

mode fiber 100 km (62.14 miles)

SFP-GE-T N/A RJ-45

Category-5 twisted

pair cable 100 m (0.06 miles)

SFP-GE-LX-SM1310-BIDI

1490 nm

(receive)/1310

nm (transmit)

LC 9/125 μm single

mode fiber 10 km (6.21 miles)

Manual version: 6PW105-20181010 BOM: 3123A0R6

iii

Type Central

wavelen

g

th

Connector

t

yp

e

Cable

s

p

ecifications

Maximum

transmission

distance

SFP-GE-LX-SM1490-BIDI

1490 nm

(transmit)/1310

nm (receive)

LC 9/125 μm single

mode fiber 10 km (6.21 miles)

SFP-GE-LH70-SM1470-CW 1470 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1490-CW 1490 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1510-CW 1510 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1530-CW 1530 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1550-CW 1550 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1570-CW 1570 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1590-CW 1590 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-GE-LH70-SM1610-CW 1610 nm LC 9/125 μm single

mode fiber 70 km (43.50 miles)

SFP-FE-SX-MM1310-A 1310 nm LC

50/125μm

multi-mode fiber 2 km (1.24 miles)

62.5/125μm

multi-mode fiber

SFP-FE-LX-SM1310-A 1310 nm LC 9/125μm single

mode fiber 15 km (9.32 miles)

SFP-FE-LH40-SM1310 1310 nm LC 9/125μm single

mode fiber 40 km (24.86 miles)

SFP-FE-LH80-SM1550 1550 nm LC 9/125μm single

mode fiber 80 km (49.71 miles)

NOTE:

•BIDI modules use different central wavelengths in transmit and receive directions, in order to

implement bidirectional transmission of optical signals over the same fiber.

•BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end,

an SFP-GE-LX-SM1490-BIDI must be used at the other end.

For supported XFP modules, see the following table.

Manual version: 6PW105-20181010 BOM: 3123A0R6

iv

Table 3 Specifications of XFP modules

Optional XFP

module

Central

wavelen

g

th

Connector

t

yp

e

Cable specifications Maximum transmission

distance

XFP-SX-MM850 850 nm LC 50/125 μm multi-mode

optical fiber 300 m (984 ft)

XFP-LX-SM1310 1,310 nm LC 9/125 μm single-mode

optical fiber 10 km (6 miles)

XFP-LH40-SM1550 1,550 nm LC 9/125 μm single-mode

optical fiber 40 km (25 miles)

XFP-LH80-SM1550 1,550 nm LC 9/125 μm single-mode

optical fiber 80 km (50 miles)

3 LEDs

The NSQ1GP24TXEA0 provides LEDs to show the operating status of the LPU.

Table 4 RJ-45 Ethernet port LED description

LED status Descri

p

tion

Flashing The Ethernet port is receiving or sending data.

On A link is present.

Off No link is present.

Table 5 SFP port LED description

LED status Descri

p

tion

Flashing The SFP port is receiving or sending data.

On A link is present.

Off No link is present.

Table 6 XFP port LED description

LIN

K

ACT Descri

p

tion

On Flashing A link is present, and the XFP port is receiving or sending data.

On Off A link is present, but no data is being received or sent.

Off Off No link is present.

4 Installing and removing the NSQ1GP24TXEA0

CAUTION:

•Wear a reliably-grounded ESD wrist strap before you install or remove the LPU.

•Do not touch the surface-mounted components directly with your hands when you install or remove

the LPU.

Manual version: 6PW105-20181010 BOM: 3123A0R6

v

4.1 Installing the NSQ1GP24TXEA0

1. Face the front panel of the device.

2. Identify the slot to install the LPU, and remove the filler panel from the slot.

This manual uses slot 3 as an example.

3. Place the LPU horizontally with the surface-mounted components facing upward. Pull outward the

ejector levers and gently push the LPU in along the slot guide rails until the LPU is in close contact

with the backplane. (See callout 1 in Figure 3 .)

4. Push the ejector levers inward. (See callout 2 in Figure 3 .)

5. Tighten the captive screws with a Phillips screwdriver to secure the LPU in the slot. (See callout 3

in Figure 3 .)

Figure 3 Installing an NSQ1GP24TXEA0

(1) Gently push the LPU in alon

g

the slot

g

uide rails until the LPU is in close contact with the backplane.

(2) Push the ejector levers inward. (3) Ti

g

hten the captive

screws

with a Phillips screwdriver.

4.2 Removing the NSQ1GP24TXEA0

1. Use a Phillips screwdriver to loosen the captive screws at both sides of the LPU until all pressure is

released.

2. Pull the ejector levers at both sides of the LPU outward, and pull the LPU along the guide rails until

it completely comes out of the backplane.

3. Place the LPU on an anti-static workbench with the surface-mounted components up, or put it in an

anti-static bag.

If no new LPU is to be installed, install a filler panel to prevent dust and ensure good ventilation in

the device.

Copyright © 2018 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

1

2

3