H3C S5130-28F-EI Bedienungsanleitung

H3C S5130-EI Switch Series

IRF Configuration Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: Release 31xx

Document version: 6W102-20150731

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface

This configuration guide describes how to set up an IRF fabric of multiple H3C S5130-EI switches,

including:

•Plan the switch roles in the IRF fabric.

•Connect the IRF links.

•Detect IRF splits and maintain the IRF fabric.

This preface includes the following topics about the documentation:

•Audience

•Conventions

•About the H3C S5130-EI documentation set

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the S5130-EI switch series.

Conventions

This section describes the conventions used in the documentation.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

Convention Descri

tion

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load-balancing device.

Represents a security card, such as a firewall, load-balancing, NetStream, SSL VPN, IPS,

or ACG card.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your device.

About the H3C S5130-EI documentation set

The H3C S5130-EI documentation set includes the following categories of documents:

Cate

Documents

Pur

oses

Hardware

specifications and

installation

Compliance and safety manual

CE DOC

Provides regulatory information and the safety

instructions that must be followed during

installation.

Installation quick start Provides basic installation instructions.

Installation guide Provides a complete guide to hardware installation

and hardware specifications.

Power modules user manual

Describes the appearance, specifications, and

installation and removal of hot-swappable power

modules.

Pluggable transceiver modules

installation guide

Guides you through installing SFP/SFP+

transceiver modules.

Pluggable modules manual

Describes the hot-swappable modules available for

the H3C switches, their external views, and

specifications.

Software

configuration

Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Operations and

maintenance

MIB Companion Describes the MIBs for the software release.

Release notes

Provide information about the product release,

including the version history, hardware and

software compatibility matrix, version upgrade

information, technical support information, and

software upgrading.

Obtaining documentation

Access the most up-to-date H3C product documentation on the World Wide Web

at http://www.h3c.com.

Click the following links to obtain different categories of product documentation:



[Technical Documents]—Provides hardware installation, software upgrading, and software feature

configuration and maintenance documentation.

[Products & Solutions]—Provides information about products and technologies, as well as solutions.

[Software Download]—Provides the documentation released with the software version.

Technical support

servic[email protected]

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

IRF overview ································································································································································· 1

Hardware compatibility····················································································································································1

IRF benefits·········································································································································································1

Application scenario·························································································································································1

Basic concepts···································································································································································2

IRF member roles ······················································································································································2

IRF member ID···························································································································································2

IRF port ······································································································································································2

IRF physical interface ···············································································································································3

IRF domain ID ···························································································································································3

IRF split ······································································································································································4

IRF merge ··································································································································································4

Member priority························································································································································4

Interface naming conventions ··········································································································································4

File system naming conventions·······································································································································5

Configuration synchronization ········································································································································6

Master election··································································································································································6

IRF multi-active detection ··················································································································································7

Multi-active handling procedure ·····························································································································7

LACP MAD ································································································································································8

BFD MAD ··································································································································································9

ARP MAD ······························································································································································· 10

ND MAD ································································································································································ 11

Configuring IRF···························································································································································13

General restrictions and configuration guidelines······································································································ 13

Software requirements ·········································································································································· 13

IRF physical interface requirements ····················································································································· 13

IRF link redundancy··············································································································································· 14

Multichassis link aggregation ······························································································································ 14

MAD and IRF domain restrictions························································································································ 15

Other configuration guidelines ···························································································································· 15

Setup and configuration task list ·································································································································· 15

Planning the IRF fabric setup········································································································································· 17

Assigning a member ID to each IRF member device ································································································· 17

Specifying a priority for each member device············································································································ 18

Connecting IRF physical interfaces······························································································································· 18

Binding physical interfaces to IRF ports ······················································································································· 19

Accessing the IRF fabric ················································································································································ 21

Configuring a member device description·················································································································· 21

Configuring IRF link load sharing mode······················································································································ 21

Configuring the global load sharing mode········································································································ 22

Configuring a port-specific load sharing mode ································································································· 22

Configuring IRF bridge MAC persistence···················································································································· 23

Enabling software auto-update for software image synchronization ······································································· 24

Configuration prerequisites ·································································································································· 24

Configuration procedure ······································································································································ 25

Setting the IRF link down report delay ························································································································· 25

Configuring MAD··························································································································································· 25

Configuring LACP MAD········································································································································ 27

Configuring BFD MAD·········································································································································· 27

Configuring ARP MAD·········································································································································· 29

Configuring ND MAD··········································································································································· 30

Excluding a port from the shutdown action upon detection of multi-active collision······································ 31

Recovering an IRF fabric ··············································································································································· 32

Displaying and maintaining an IRF fabric··················································································································· 33

Configuration examples ················································································································································ 34

LACP MAD-enabled IRF configuration example································································································· 34

BFD MAD-enabled IRF configuration example··································································································· 38

ARP MAD-enabled IRF configuration example··································································································· 43

ND MAD-enabled IRF configuration example···································································································· 47

Index ···········································································································································································53

IRF overview

H3C Intelligent Resilient Framework (IRF) technology creates a large IRF fabric from multiple devices to

provide data center class availability and scalability. IRF virtualization technology offers processing

power, interaction, unified management, and uninterrupted maintenance of multiple devices.

This book describes IRF concepts and guides you through the IRF setup procedure.

Hardware compatibility

An H3C S5130-EI switch can form an IRF fabric only with devices in the same series.

IRF benefits

IRF provides the following benefits:

•Simplified topology and easy management—An IRF fabric appears as one node and is accessible

at a single IP address on the network. You can use this IP address to log in at any member device

to manage all the members of the IRF fabric. In addition, you do not need to run the spanning tree

feature among the IRF members.

•1:N redundancy—In an IRF fabric, one member acts as the master to manage and control the entire

IRF fabric. All the other members process services while backing up the master. When the master

fails, all the other member devices elect a new master from among them to take over without

interrupting services.

•IRF link aggregation—You can assign several physical links between neighboring members to their

IRF ports to create a load-balanced aggregate IRF connection with redundancy.

•Multichassis link aggregation—You can use the Ethernet link aggregation feature to aggregate the

physical links between the IRF fabric and its upstream or downstream devices across the IRF

members.

•Network scalability and resiliency—Processing capacity of an IRF fabric equals the total

processing capacities of all the members. You can increase ports, network bandwidth, and

processing capacity of an IRF fabric simply by adding member devices without changing the

network topology.

Application scenario

Figure 1 shows an IRF fabric that has two devices, which appear as a single node to the upper-layer and

lower-layer devices.

Figure 1 IRF application scenario

Basic concepts

This section describes the basic concepts you might encounter when you work with IRF.

IRF member roles

IRF uses two member roles: master and standby (called subordinate throughout the documentation).

When devices form an IRF fabric, they elect a master to manage and control the IRF fabric, and all the

other devices back up the master. When the master device fails, the other devices elect a new master

automatically. For more information about master election, see "Master election."

IRF member ID

An IRF fabric uses member IDs to uniquely identify and manage its members. This member ID information

is included as the first part of interface numbers and file paths to uniquely identify interfaces and files in

an IRF fabric. For more information about interface and file path naming, see "Interface naming

conventions" and "File system naming conventions."

If two devices have the same IRF member ID, they cannot form an IRF fabric. If the IRF member ID of a

device has been used in an IRF fabric, the device cannot join the fabric.

IRF port

An IRF port is a logical interface for the connection between IRF member devices. Every IRF-capable

device supports two IRF ports. The IRF ports are named IRF-port n/1 and IRF-port n/2, where nis the

member ID of the device. The two IRF ports are referred to as IRF-port 1 and IRF-port 2 in this book.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere H3C Schalten Handbücher

H3C

H3C S9820-8C-SAN Bedienungsanleitung

H3C

H3C SECPATH 5080F-CMW710-R9628P2414 Anleitung zur Verwendung

H3C

H3C LSWM124TG2H Bedienungsanleitung

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C S10506 Bedienungs- und Wartungshandbuch

H3C

H3C SecPath T9000-S Bedienungsanleitung

H3C

H3C S7500E-XS Series Installationshandbuch

H3C

H3C S5810 Series Bedienungsanleitung

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S12500 Series Bedienungsanleitung

H3C

H3C S1850-X Series Bedienungsanleitung

H3C

H3C S9500 Series Montageanleitung

H3C

H3C S7500 Series Bedienungsanleitung

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C PSR600-54A-B Bedienungsanleitung

H3C

H3C T300M-XS Bedienungs- und Wartungshandbuch

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S3100 Series Montageanleitung

H3C

H3C S9500 Series Montageanleitung

H3C

H3C S6800-2C Bedienungs- und Wartungshandbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung