H3C S9500 Series Bedienungsanleitung

H3C S9500 Series Routing Switches

Operation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-081655-20080530-C-2.03

Product Version: S9500-CMW520-R2132

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www.h3c.com

Technical Support

customer_service@h3c.com

http://www.h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S9500 Series Routing Switches documentation

set includes the following:

Manual Description

H3C S9500 Series Routing Switches

Installation Manual

It introduces the installation procedure,

commissioning, maintenance and

monitoring of the S9500 series routing

switches.

H3C S9500 Series Routing Switches

Command Manual

It includes Feature List and Command

Index, Access Volume, IP Service

Volume, IP Routing Volume, IP Multicast

Volume, MPLS VPN Volume, QoS ACL

Volume, Security Volume, System

Volume, and unsupported commands.

Organization

H3C Configuration Manual is organized as follows:

Part Contents

00 Product Overview includes Obtaining the Documentation, Product

Features, and Features.

01 Access Volume

includes Ethernet Interface Configuration, POS

Interface Configuration, GVRP Configuration, Link

Aggregation Configuration, Port Mirroring

Configuration, RPR Configuration, Ethernet OAM

Configuration MSTP Configuration, VLAN

Configuration, QinQ Configuration, BPDU Tunneling

Configuration, and Port Isolation Configuration.

02 IP Services Volume

includes ARP Configuration, DHCP Configuration,

DNS Configuration, IP Addressing Configuration, IP

Performance Configuration, UDP Helper Configuration

IPv6 Basics Configuration, Dual Stack Configuration,

Tunneling Configuration, and Adjacency Table

Configuration.

Part Contents

03 IP Routing Volume

includes IP Routing Overview, BGP Configuration,

IS-IS Configuration, OSPF Configuration, RIP

Configuration, Routing Policy Configuration, Static

Routing Configuration, IPv6 BGP Configuration, IPv6

IS-IS Configuration, IPv6 OSPFv3 Configuration, IPv6

RIPng Configuration, and IPv6 Static Routing

Configuration.

04 IP Multicast Volume

includes Multicast Overview, Multicast Routing and

Forwarding Configuration, IGMP Snooping

Configuration, IGMP Configuration, PIM Configuration,

MSDP Configuration, IPv6 Multicast Routing and

Forwarding Configuration, MLD Snooping

Configuration, MLD Configuration, IPv6 PIM

Configuration, and Multicast VLAN Configuration.

05 MPLS VPN Volume

includes MPLS Basics Configuration, MPLS TE

Configuration, VPLS Configuration, MPLS L2VPN

Configuration, MPLS L3VPN Configuration, MPLS

Hybrid Insertion Configuration, and GRE Configuration.

06 QoS ACL Volume includes QoS Configuration and ACL Configuration.

07 Security Volume

includes 802.1x Configuration, AAA RADIUS

HWTACACS Configuration, MAC Authentication

Configuration, L3+NAT Configuration, Password

Control Configuration, SSH2.0 Configuration, and

Portal Configuration.

08 System Volume

includes GR Configuration, VRRP Configuration, HA

Configuration, Device Management Configuration,

NQA Configuration, NetStream Configuration, NTP

Configuration, RMON Configuration, SNMP

Configuration, File System Management Configuration,

System Maintaining and Debugging Configuration,

Basic System Configuration, Information Center

Configuration, User Interface Configuration, MAC

Address Table Management Configuration, PoE

Configuration, and Clock Monitoring Configuration.

09 OAA Volume includes OAP Module Configuration and ACSEI

Configuration.

10 Acronyms Offers the acronyms used in this manual.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Operation Manual

H3C S9500 Series Routing Switches Access Volume Organization

Manual Version

T2-081655-20080530-C-2.03

Product Version

S9500-CMW520-R2132

Organization

The Access Volume is organized as follows:

Features

(operation

manual) Description

Ethernet Interface The volume describes:

zEthernet port overview

zEthernet port configuration

POS Interface

Packet over SONET/SDH (POS) is a technology used in MAN

(metropolitan area network) and WAN (wide area network) for

data packet transmission. The volume describes:

zPOS port overview

zPOS port configuration

GVRP GVRP is a GARP application. The volume describes:

zGARP overview

zGVRP configuration

Link Aggregation

Link aggregation means aggregating several ports together

into an aggregation group. The volume describes:

zLink aggregation overview

zLink aggregation configuration

Port Mirroring

Port mirroring is to copy the packets passing through a port to

another port connected with a monitoring device for packet

analysis. The volume describes:

zPort Mirroring overview

zPort Mirroring configuration

RPR

RPR is a new MAC layer protocol designed for transferring

mass data services over MANs. The volume describes:

zRPR overview

zRPR configuration

Operation Manual

H3C S9500 Series Routing Switches Access Volume Organization

Features

(operation

manual) Description

Ethernet OAM

Ethernet OAM is a tool monitoring Layer-2 link status. It helps

network administrators manage their networks effectively. The

volume describes:

zEthernet OAM overview

zEthernet OAM configuration

MSTP

MSTP is compatible with STP and RSTP. The volume

describes:

zIntroduction to MSTP

zMSTP configuration

VLAN

A Virtual Local Area Network (VLAN) groups the devices in a

LAN logically into segments to form virtual workgroups. The

volume describes:

zVLAN overview and configuration

zVLAN types

zSuper VLAN overview and configuration

zIsolate-user-VLAN overview and configuration

QinQ

QinQ is a technique that enables packets to be transmitted

across the operators’ backbone networks with VLAN tags of

private networks nested in those of public networks. The

volume describes:

zQinQ overview

zBasic QinQ configuration

BPDU Tunneling

The BPDU tunneling feature enables geographically

segmented customer network to transmit BPDU packets

transparently over the specified VLAN on the service provider

network. The volume describes:

zBPDU tunnel overview

zBPDU tunnel configuration

Port Isolation

Using the port isolation feature, you can place different user

ports into the same VLAN. The volume describes:

zPort isolation overview

zPort isolation configuration

Operation Manual – Ethernet Interface

H3C S9500 Series Routing Switches Table of Contents

Table of Contents

Chapter 1 Ethernet Interface Configuration ...............................................................................1-1

1.1 Ethernet Interface Configuration........................................................................................1-1

1.1.1 Configuration Task List ...........................................................................................1-1

1.1.2 Configuring LAN/WAN Mode for a 10GE Interface.................................................1-1

1.1.3 Basic Ethernet Interface Configuration...................................................................1-3

1.1.4 Configuring Flow Control on an Ethernet Interface.................................................1-4

1.1.5 Configuring Physical State Change Suppression on an Ethernet Interface........... 1-5

1.1.6 Configuring Loopback Testing on an Ethernet Interface.........................................1-5

1.1.7 Configuring a Manual Port Group ...........................................................................1-6

1.1.8 Configuring Traffic Suppression for an Ethernet Interface......................................1-7

1.1.9 Setting the Interval for Collecting Ethernet Interface Statistics...............................1-8

1.1.10 Setting the Maximum Jumbo Frame Size for Ethernet Interfaces........................ 1-8

1.1.11 Configuring the MDI Mode of an Ethernet Interface .............................................1-9

1.1.12 Configuring the Source MAC Address for an Interface.......................................1-10

1.2 Displaying and Maintaining Ethernet Interfaces..............................................................1-11

Operation Manual – Ethernet Interface

H3C S9500 Series Routing Switches Chapter 1 Ethernet Interface Configuration

1-1

Chapter 1 Ethernet Interface Configuration

When configuring Ethernet interfaces, go to these sections for information you are

interested in:

zEthernet Interface Configuration

zDisplaying and Maintaining Ethernet Interfaces

1.1 Ethernet Interface Configuration

1.1.1 Configuration Task List

Complete the following tasks to configure an Ethernet interface:

Task Remarks

Configuring LAN/WAN Mode for a 10GE Interface Optional

Basic Ethernet Interface Configuration Optional

Configuring Flow Control on an Ethernet Interface Optional

Configuring Physical State Change Suppression on an

Ethernet Interface Optional

Configuring Loopback Testing on an Ethernet Interface Optional

Configuring a Manual Port Group Optional

Configuring Traffic Suppression for an Ethernet Interface Optional

Setting the Interval for Collecting Ethernet Interface Statistics Optional

Setting the Maximum Jumbo Frame Size for Ethernet

Interfaces Optional

Configuring the MDI Mode of an Ethernet Interface Optional

Configuring the Source MAC Address for an Interface Optional

1.1.2 Configuring LAN/WAN Mode for a 10GE Interface

I. Introduction to LAN/WAN mode

According to the physical characteristics, a ten-GigabitEthernet (10GE) interface can

work in LAN or WAN mode.

zLAN mode. 10GE interfaces operating in this mode are used to provide network

access for Ethernets. They receive and forward Ethernet packets.

Andere Handbücher für S9500 Series

Inhaltsverzeichnis

Andere H3C Schalten Handbücher

H3C

H3C S5130S-EI series Bedienungsanleitung

H3C

H3C S5120V3-EI Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S5560S-SI Bedienungsanleitung

H3C

H3C S5500-HI Switch Series Bedienungsanleitung

H3C

H3C S5130-28F-EI Bedienungsanleitung

H3C

H3C S5810 Series Bedienungsanleitung

H3C

H3C S3100 Series Bedienungsanleitung

H3C

H3C S7502 Bedienungsanleitung

H3C

H3C BX1020B IB Bedienungsanleitung

H3C

H3C S3100-52P Montageanleitung

H3C

H3C S5560S-EI Series Bedienungsanleitung

H3C

H3C S10500X Series Bedienungsanleitung

H3C

H3C S6890-30HF Bedienungs- und Wartungshandbuch

H3C

H3C FS5100-EI Series Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S9500E Series Bedienungsanleitung

H3C

H3C S6520-SI Series Installationshandbuch

H3C

H3C S5560X-EI Series Bedienungsanleitung

H3C

H3C S6860 Series Bedienungsanleitung

H3C

H3C s5800 series Bedienungsanleitung

H3C

H3C S5130S-EI series Bedienungsanleitung

H3C

H3C S5130S-HI Series Bedienungsanleitung

H3C

H3C LS-3100-52P-OVS-H3 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung