H3C WX5004 Bedienungsanleitung

H3C WX5004 Access Controller

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6PW101-20130128

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care,

, IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of

Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. Thestorage,

use, and disposal of this product must meet the applicable national laws and regulations.

About This Manual

Organization

The H3C WX5004 documentation set includes:

Category Documents Purposes

Marketing brochures Describe product specifications and benefits.

Product description and

specifications Technology white

papers Provide an in-depth description of software

features and technologies.

Compliance and safety

manual

Provides regulatory information and the safety

instructions that must be followed during

installation.

Hardware

specifications and

installation Installation guide Provides a complete guide to hardware

installation and hardware specifications.

Configuration guides Describe software features and configuration

procedures.

Command references Provide a quick reference to all available

commands.

Software configuration

Configuration

examples Describe typical network scenarios and provide

configuration examples and instructions.

Operations and

maintenance Release notes

Provide information about the product release,

including the version history, hardware and

software compatibility matrix, version upgrade

information, technical support information, and

software upgrading.

Conventions

The manual uses the following conventions:

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in

Boldface. For example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File >

Create > Folder.

Convention Description

< > Button names are inside angle brackets. For example, click <OK>.

[ ] Window names, menu items, data table and field names are inside

square brackets. For example, pop up the [New User] window.

/ Multi-level menus are separated by forward slashes. For example,

[File/Create/Folder].

Symbols

Convention Description

Means reader be extremely careful. Improper operation may cause

bodily injury.

Means reader be careful. Improper operation may cause data loss or

damage to equipment.

Means an action or information that needs special attention to ensure

successful configuration or good performance.

Means a complementary description.

Obtaining Documentation and Technical Support

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with

the software version.

Technical Support

service@h3c.com

http://www.h3c.com

Documentation Feedback

You can e-mail your comments about product documentation to [email protected]m.

We appreciate your comments.

Table of Contents

1 Access Controller Overview·····················································································································1-1

Introduction ·············································································································································1-1

Appearance·············································································································································1-1

Front Panel ······································································································································1-1

Rear Panel·······································································································································1-2

Specifications ··········································································································································1-3

Processor and Storages··················································································································1-3

Dimensions and Weight···················································································································1-3

Fixed Interfaces and Slots···············································································································1-3

Power Input ·····································································································································1-3

Components············································································································································1-4

LEDs················································································································································1-4

Fixed Interfaces ·······························································································································1-5

Fans·················································································································································1-9

Interface Numbering································································································································1-9

2 Installation Preparation·····························································································································2-1

Safety Precautions ··································································································································2-1

Installation Site Checking························································································································2-2

Requirements on Temperature and Humidity ·················································································2-2

Requirements on Cleanness ···········································································································2-2

Anti-Static Requirements·················································································································2-3

Electromagnetic Environment Requirements··················································································2-4

Laser Safety ····································································································································2-4

Installation Tools ·····································································································································2-5

3 Installation··················································································································································3-1

Installation Procedure ·····························································································································3-1

Installing the Access Controller onto a 19-Inch Rack ·············································································3-2

Installing the Access Controller with Front and Rear Mounting Brackets ·······································3-2

Installing the Access Controller with Front Mounting Brackets and a Tray·····································3-6

Installing the Access Controller with Mounting Brackets and Slide Rails ·······································3-7

Installing the Access Controller on a Workbench ···················································································3-9

Connecting the Ground Wire ··················································································································3-9

Connecting the Power Cord··················································································································3-11

Connecting the AC Power Cord ····································································································3-11

Connecting the DC Power Cord ····································································································3-12

Connecting Interface Cables·················································································································3-13

Connecting the Console Cable······································································································3-13

Connecting the Ethernet Cable ·····································································································3-14

Checking the Installation·······················································································································3-15

4 Initial Startup··············································································································································4-1

Setting up the Configuration Environment ······························································································4-1

Connecting a Configuration Terminal to the Access Controller ······················································4-1

Setting Terminal Parameters···········································································································4-1

Powering On the Access Controller ········································································································4-3

Checking Before Power-On·············································································································4-3

Powering on the Access Controller ·································································································4-4

5 Software Maintenance·······························································································································5-1

Overview ·················································································································································5-1

Files Managed by the Access Controller·························································································5-1

BootWare Program File···················································································································5-1

Application Files ······························································································································5-1

Configuration Files···························································································································5-2

Approaches for Software Maintenance ···························································································5-3

BootWare and Application File Upgrade Flow ················································································5-4

BootWare Menus ····································································································································5-4

BootWare Main Menu······················································································································5-4

BootWare Submenus ······················································································································5-6

Upgrading the BootWare Through a Ethernet/Serial Interface·······························································5-7

Modifying Serial Interface Parameters ····························································································5-8

Upgrading the BootWare Through an Ethernet Interface······························································5-10

Upgrading the BootWare Through a Serial Interface ····································································5-12

Upgrading Applications Through a Serial Interface on the BootWare Menu ········································5-14

Upgrading Applications Through an Ethernet Interface on the BootWare Menu··································5-15

Configuring Ethernet Interface Parameters···················································································5-15

Upgrading Applications Through an Ethernet Interface ································································5-16

Maintaining the Application and Configuration Files Through the CLI··················································5-17

Maintaining the Access Controller Through TFTP ········································································5-17

Maintaining the Access Controller Through FTP ··········································································5-19

Maintaining Application and Configuration Files···················································································5-22

Displaying All Files ························································································································5-22

Setting an Application File Type····································································································5-22

Specifying a Startup Configuration File ·························································································5-23

Delete a File ··································································································································5-24

Dealing With Password Loss ················································································································5-24

User Password Loss······················································································································5-25

BootWare Password Loss ·············································································································5-25

Super Password Loss····················································································································5-26

Backing Up and Restoring the BootWare ·····························································································5-26

Using the BootWare Menu ············································································································5-26

Using the CLI·································································································································5-26

6 Troubleshooting ········································································································································6-1

Software Loading Failure ························································································································6-1

Power Supply Failure······························································································································6-1

Configuration System Failure··················································································································6-2

No Display on the Terminal ·············································································································6-2

Illegible Characters on the Terminal································································································6-2

1-1

1 Access Controller Overview

Introduction

The H3C WX5004 Access Controller is a new-generation wireless access controller product developed

by Hangzhou H3C Technologies Co., Ltd. (referred to as H3C hereinafter) based on the updated

multi-core CPU platform. Compared with the WX5002, the previous-generation access controllers, the

WX5004 has two more groups of Combo ports, allowing for more flexible user configurations. Besides,

the WX5004 also provides an expansion slot, where you can insert a card of a different type as needed

in the future. This provides not only strong processing capability but also flexible system configuration

schemes. In terms of reliability, the WX5004 uses pluggable power supply units (PSU). Thus, you can

choose to use double PSUs for high reliability or use a single PSU for economical sake.

Appearance

Figure 1-1 shows the appearance of the WX5004.

Figure 1-1 Appearance of the WX5004

Front Panel

The WX5004 provides four 10/100/1000 Base-T Ethernet electrical interfaces, four 1000 Base-X

Ethernet optical interfaces (Combo ports) and one console port on its front panel, as shown in Figure

1-2.

1-2

Figure 1-2 Front panel of the WX5004

(1) Gigabit Ethernet interface 4—SFP optical interface

(2) 1000 Mbps LED of gigabit Ethernet interface 4

(3) 10/100 Mbps LED of gigabit Ethernet interface 4

(4) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 4

(5) Gigabit Ethernet interface 3—SFP optical interface

(6) 1000 Mbps LED of gigabit Ethernet interface 3

(7) 10/100 Mbps LED of gigabit Ethernet interface 3

(8) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 3

(9) Gigabit Ethernet interface 2—SFP optical interface

(10) 1000 Mbps LED of gigabit Ethernet interface 2

(11) 10/100 Mbps LED of gigabit Ethernet interface 2

(12) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 2

(13) Gigabit Ethernet interface 1—SFP optical interface

(14) 1000 Mbps LED of gigabit Ethernet interface 1

(15) 10/100 Mbps LED of gigabit Ethernet interface 1

(16) 10/100/1000 Base-T auto-sensing Ethernet electrical interface 1

(17) Console port (18) System LED

(19) LED of the expansion card (20) LED of power supply 1

(21) LED of power supply 2

Rear Panel

The WX5004 provides two power supply module slots and one expansion card slot, as shown in Figure

1-3.

Figure 1-3 Rear panel of the WX5004

(1) PSU 1 (AC/DC) (2) Handle of PSU 1

(3) OPEN BOOK sign (4) Power cord retainer for PSU 1

(5) AC power socket of PSU 1 (6) PSU 2 (AC/DC)

(7) Handle of PSU 2 (8) OPEN BOOK sign

(9) Power cord retainer for PSU 2 (10) AC power socket of PSU 2

(11) Expansion card slot (12) OPEN BOOK sign

(13) Grounding screw

OPEN BOOK and CAUTION signs: Refer to related sections when performing the following operations:

1-3

Table 1-1 OPEN BOOK sign description

Operation Related section

Connect the power cord Connecting the AC Power Cord

Ground the device Connecting the Ground Wire

Specifications

Processor and Storages

Table 1-2 Processor and storages of the WX5004

Item Description

Processor XLR716 (800 MHz)

CF card Built in, 256 MB

Memory type and capacity Memory: DDR2 SDRAM

Capacity: 2048 MB

Dimensions and Weight

Table 1-3 Dimensions and weight

Item Description

Dimensions (H × W × D) 43.6 × 440 × 430 mm (1.72 × 17.32 × 16.93 in.)

Weight 7.4 kg (16.31 lb.) (with two PSUs installed)

Fixed Interfaces and Slots

Table 1-4 Fixed interfaces and slots

Item Description

Console port 1 console port, 9600 bps (the default) to 115200 bps.

Ethernet interfaces 4 × 10/100/1000 Base-T autosensing Layer 2 Ethernet interfaces; support

MDI/MDIX

SFP interfaces 4 × 1000 Base-X SFP optical interfaces, forming Combo ports together with

the corresponding Ethernet electrical interfaces

Slots z1 expansion card slot

z2 PSU slots

Power Input

The WX5004 uses two AC/DC PSUs, which provide 1+1 redundancy backup for the WX5004 to

enhance the system reliability.

1-4

Table 1-5 AC/DC power input

Item Description

Rated voltage range For AC power input: 100 VAC to 240 VAC, 50 Hz or 60 Hz

For DC power input: –48 VDC to –60 VDC

Max input voltage range For AC power input: 90 VAC to 264 VAC, 47 Hz to 63 Hz

For DC power input: –36 VDC to –72 VDC

Power consumption 53.4 W to 67.7 W

zYou are not recommended to use an AC power module with a DC power module on the device.

zNo AC or DC power module is provided with the access controller. You need to prepare them

yourself.

Components

LEDs

The WX5004 provides LEDs on the front panel, as shown in Figure 1-4.

Figure 1-4 LEDs of the WX5004

(4)

(1) (2)

(5)

(3)

(6)

(1) 1000 Mbps LED of gigabit Ethernet interface (1000M)

(2) System status LED (SYS) (3) Status LED of PSU 1 (PWR1)

(4) 10/100 Mbps LED of gigabit Ethernet interface (10/100M)

(5) LED of the expansion card (MOD) (6) Status LED of PSU 2 (PWR2)

Table 1-6 Description of LEDs

LEDs Silkscreen Status Description

Solid green PSU 1 supplies power to the system

normally.

Solid yellow PSU 1 is faulty.

LED of PSU 1

(green/yellow) PWR1

Off No PSU is installed in the slot.

Andere Handbücher für WX5004

Inhaltsverzeichnis

Andere H3C Schalten Handbücher

H3C

H3C SE-S5130 Series Bedienungsanleitung

H3C

H3C S5500-SI Series Montageanleitung

H3C

H3C H3C S3600 Series Montageanleitung

H3C

H3C s5800 series Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S6550XE-HI Series Bedienungsanleitung

H3C

H3C UniServer BX608FE Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C EPON OLT Bedienungsanleitung

H3C

H3C S5500-28 C-EI-DC Bedienungsanleitung

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C S5120-SI Series Bedienungsanleitung

H3C

H3C S5500-HI Switch Series Bedienungsanleitung

H3C

H3C s5820x series Installationshandbuch

H3C

H3C S9500E Series Bedienungsanleitung

H3C

H3C S7500 Series Bedienungsanleitung

H3C

H3C S9820-8C Bedienungsanleitung

H3C

H3C FS5100-EI Series Bedienungsanleitung

H3C

H3C S7500 Series Bedienungsanleitung

H3C

H3C S5120-HI Series Bedienungsanleitung

H3C

H3C S6800-54QT Bedienungs- und Wartungshandbuch

H3C

H3C s5800 series Bedienungsanleitung

H3C

H3C S6800-2C-FC Bedienungs- und Wartungshandbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung